Speakers & Components

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.

Eminence

An American manufacturer of guitar speakers, bass speakers, and PA loudspeakers since 1966.

Celestion

Founded in 1924, Celestion has grown to become one of the world's largest manufacturers of loudspeakers.

American Standard

Each Eminence American Standard model can be identified by its economical Stamped Steel chassis. Although more affordable than cast aluminum, these frames provide an excellent and versatile chassis. Each basket and all metal components are coated with an epoxy-acrylic finish using Eminence's in-house e-coat process. Eminence controls the thickness of that coating to within 0.001�; critical when working with close tolerance transducer motor designs, then adding front and rear sealing gaskets on each model to accommodate front or rear loading.
P-A-T5622 Speaker - Celestion, 10", BN10-200X, 200W, 8Ω
Special Order Item
Light in weight but certainly not in performance, the BN10-200X neodymium bass speaker delivers a rich warm tone combined with a powerful low end punch.
$139.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5623 Speaker - Celestion, 15", BN15-400X, 400W, 8Ω
Special Order Item
A 15 inch bass guitar speaker with 400-watt of thunderous power handling capability, the lightweight neodymium magnet BN15-400X skilfully brings your low end to the forefront.
$204.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5629 Speaker - Celestion, 10", BL10-100X, 100W, 8Ω
Special Order Item
Built for bass without compromise, the 100-watt BL10-100X is a 10 inch bass guitar speaker that delivers heavy duty presence with drive, clarity and a full-bodied tone.
$59.99
Out of Stock
P-A-T5635 Speaker - Celestion, 15", BL15-300X, 300W, 4Ω
Special Order Item
Not every player wants a super-clean, high-fidelity bass sound. Characterised by an extended low end and greater linear excursion, Green Label speakers push out every note with a rich, warm tone and a powerful low-end thump. Green Label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.
$94.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5638 Speaker - Celestion, 10", NTR10-2520D, 250W, 8Ω
Special Order Item
Celestion, NTR10-2520D, 10", 8Ω.
$289.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5639 Speaker - Celestion, 10", NTR10-2520E, 250W, 8Ω
Special Order Item
Speaker, Celestion, NTR10-2520E, 10", 8Ω.
$289.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5640 Speaker - Celestion, 1.4". CDX14-3050, 75W ,8Ω
Special Order Item
Neodymium magnet compression driver
$374.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5641 Speaker - Celestion, 6.5", NTR06-1705B, 150W, 8Ω
Special Order Item
Speaker, Celestion, NTR06-1705B, 6.5 in., 8Ω
$159.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5642 Speaker - Celestion, 6.5", NTR06-1705D, 150W, 8Ω
Special Order Item
Speaker, Celestion, NTR06-1705D, 6.5 in., 8Ω.
$189.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5644 Speaker - Celestion, 12", FTR12-3070C, 350W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$129.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5658X Speaker - Celestion, 12", G12 EVH, 20W
Special Order Item
Throughout his career, whether in the studio or on the stage, the Celestion 20-watt 'Greenback' has played an essential role to Edward Van Halen in making the tones that rewrote the book on guitar sound. When it came time to select speakers for his new EVH Brand 5150-III signature amp, there was only one choice – Celestion.The Heritage Series G12M faithfully reproduces the sonic qualities of the original '60s version Greenback used to make EVH tone from day one. With the addition of a black rear can featuring the EVH logo and his unmistakable red, white and black stripes, the G12EVH was born. Unmistakable look, but more importantly unmistakable tone.
$149.00
Note: special order items require additional lead time. See our page on special order items.
P-A-T5667X Speaker - Celestion, 10", G10N-40, 40W, 8Ω
Special Order Item
This classy 10" is a true 'modern vintage' guitar speaker, that delivers an exceptionally well balanced tone that has real Celestion pedigree. The G10N-40 is characterised by satisfyingly deep lows that are complemented by sweet and clear upper mids and an articulate, well-defined top end. Loaded into small combos, the G10N-40 articulates a detailed and warm clean sound, and its balanced response means this versatile speaker is still able to deliver true British grind when pushed to the limit.
$69.00
Note: special order items require additional lead time. See our page on special order items.
P-A-T5668 Speaker - Celestion, 8", NTR08-2009D, 200W, 8Ω
Special Order Item
Speaker, Celestion, NTR08-2009D, 8 in., 8Ω.
$349.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5677 Speaker - Celestion, 12", T.F. Series 1225CX*, 250W, 8Ω
Special Order Item
Speaker, Celestion, TF1225CX*, 12+1, 8 ohm Features:
  • 12" coaxial loudspeaker with 40-18,000Hz response
  • 250Wrms (AES standard) power handling and 97dB sensitivity
  • 2.5" high temperature copper voice coil wound on polyimide for increased reliability
  • Robust and reliable pressed steel frame ferrite magnet LF driver
  • Compact, lightweight neodymium compression driver - 80º nominal coverage
$219.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5683X Speaker - Celestion, 2", CDX20-3000, 75W
Special Order Item
Speaker, Celestion, CDX20-3000, 2 in.
Features:
  • 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading
$439.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5703 Speaker - Celestion, 12", T.F. Series 1230, 350 watts
Special Order Item
Speaker, Celestion, TF1230, 12 in., 8 ohm Features:
  • 12" Bass driver providing 94dB sensitivity and 350Wrms (AES standard) power handling
  • 3" high temperature copper voice coil wound on polyimide for increased reliability
  • Kevlar-loaded cone with sealed surround and damping for reduced distortion.
  • Double roll surround for greater excursion control
  • Vented magnet assembly for enhanced cooling
  • For use in 2-way or compact 3-way systems
$129.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5713 Speaker - Celestion, 1", CDX1-1720, 50W, 8Ω
Special Order Item
Neodymium magnet compression driver
  • 1" exit, lightweight and compact compression driver featuring neodymium magnet and 1.75" diameter titanium diaphragm
  • 50Wrms (AES standard) power handling and 107dB sensitivity
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Lower resonance enabling lower crossover frequency
  • Patented phase plug design method suppresses cavity resonances at frequencies higher than that of convential designs
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Curved coherent wavefront, optimised for horn loading
$189.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5720 Speaker - Celestion, 10", T.F. Series 1018, 100 watts
Special Order Item
Speaker, Celestion, TF1018, 10 in., 8 ohm Features:
  • 10" driver providing 96dB sensitivity and 100Wrms (AES standard) power handling
  • 1.75" high temperature copper voice coil wound on polyimide for increased reliability
  • Superior bass and mid-range performance
  • Rigid chassis design for maximum energy transfer
  • Excellent price/performance ratio
$59.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5763 Speaker - Celestion, 21", NTR21-5010JD, 1600W, 8Ω
Special Order Item
Speaker, Celestion, NTR21-5010JD, 21", 8Ω.
$549.00
Note: special order items require additional lead time. See our page on special order items.
P-A-T5779 Speaker - Celestion, 1.4", CDX14-2420, 70W, 8Ω
Special Order Item
Neodymium magnet compression driver
$289.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5782 Speaker - Celestion, 15", T.F. Series 1530e, 400 watts
Special Order Item
Speaker, Celestion, TF1530e, 15 in., 8 ohm Features:
  • 15" driver provides extended low frequency range
  • 3" edgewound voice coil enables 98dB efficiency and 400Wrms (AES standard) power handling
  • Vented magnet assembly for enhanced cooling
  • Kevlar-loaded cone with sealed surround and damping for reduced distortion
  • Special consideration is paid to materials and construction to deliver maximum reliability
  • Suitable for use in 2-way and 3-way systems
$144.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5796 Speaker - Celestion, 1", CDX1-1446, 20W, 8Ω, screw
Special Order Item
Ferrite magnet compression driver, suitable for 2-way and 3-way systems. Screw version.
  • 1" exit lightweight and compact ferrite magnet compression driver with 1.4" copper clad aluminium voice coil
  • 20Wrms power handling (AES standard) and 106dB sensitivity
  • 35mm/1.38in screw attachment
  • One piece PETP diaphragm and surround
  • Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design
  • Suitable for 2-way and 3-way systems
$44.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5801 Speaker - Celestion, 3.5", AN3510 Compact Array, 35 watts
Special Order Item
Speaker, Celestion, AN3510 Compact Array, 3.5 in., 8 ohm Features:
  • Compact and lightweight, full-range neodymium loudspeakers
  • Advanced Finite Element Analysis techniques used for acoustic, mechanical and electromagnetic modelling
  • Ideal for applications such as portable line arrays where actively controlled wavefront (beam steering) is used
  • Delivers wider dispersion to higher frequencies than many equivalent compact, full-range drivers on the market
  • Chassis purpose-designed for maximum free air movement, with square mounting frame to facilitate close coupling of multiple units
  • Stiff and light aluminium cone remains rigid to higher frequencies, delivering a smoother response in the critical listening band
  • Half roll elastomer surround provides damping for unwanted resonances and sustained centring control at extremes of excursion
  • Designed to be weather resistant for outdoor applications
$43.00
Note: special order items require additional lead time. See our page on special order items.
P-A-T5806 Speaker - Celestion, 18", CF18VJD, 1600 watts
Special Order Item
Speaker, Celestion, CF18VJD, 18 in., 8 ohm Features:
  • 18" ferrite magnet, cast aluminium chassis LF driver delivering 1600Wrms (AES Standard) power handling and 97dB sensitivity
  • 5" high temperature, dual layer, Inside/Outside voice coil for higher efficiency, preventing sensitivity loss through thermal compression
  • FEA optimized magnet assembly and suspension deliver highly symmetrical cone movement, leading to exceptionally low harmonic distortion
  • Vented front plate increases airflow to provide enhanced cooling
  • Twin demodulation rings reduce flux modulation, minimizing electromagnetic distortion
  • Double suspension and "multi-roll" surround provide exceptional linearity at extremes of cone excursion
$575.00
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!