You are here

Speakers

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. 

Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating.  (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.  

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(48 pages)
P-A-BELL-P-RBell Cover - Jensen®, for Alnico R Type Speakers

For use on the Jensen P-A-P8R, P-A-P10R, P-A-P12R and P-A-P12Q.


$33.22
$29.90
You save: 10%
Click to read more
P-A-C12KSpeaker - Jensen® Vintage Ceramic, 12", C12K, 100W

A real workhorse, heavy on the mids with a solid, straightforward tone. When presented with overdrive distortion it powers through with lows that are bold and heavy.


$104.00
$93.60
You save: 10%
Click to read more
P-A-C15NSpeaker - Jensen® Vintage Ceramic, 15", C15N, 50W

Tight low-end and clear, bright highs. It responds to overdrive distortion with a gritty edge.


$126.10
$113.49
You save: 10%
Click to read more
P-A-G10-GOLDSpeaker - Celestion, 10", G10 Alnico Gold, 40W

The G10 Gold is the ultimate 10" speaker, blending unmistakable Alnico class with a rich low-end, creamy midrange and vintage chiming top-end. Springy, warm, revealing and highly expressive, it can be used singly or in pairs to add a classy sheen to any amp, or in a 4x10 configuration for higher volume depth, warmth and shimmer, with less of the boom associated with 4x12 cabinets.


$175.00
$157.50
You save: 10%
Click to read more
P-A-G12Speaker - Celestion, 12", G12 Alnico Blue, 15W

Celestion Alnico guitar speaker. This classic guitar speaker actually started life as a radio speaker that was modified specifically for use in electric guitar amplifiers.Warm lows, relaxed mids and sparkling highs. When distorted it is smooth and articulated.


$279.00
$251.10
You save: 10%
Click to read more
P-A-G12HSpeaker - Celestion, 12", G12H, 30W

Used singly it exhibits a pleasing, strong low-end, but it's in a 4x12 configuration that it generates the great chugging "thump" that the guitar heroes of the day were renowned for. With a densely complex and buttery mid-range and a finely detailed top-end, the G12H is excellent for cranking out huge, dark power chords, with smooth and rich bridge pickup tones and flutey neck pickup tones. With fatter lows and brighter highs, it is slightly more aggressive than its Heritage cousin.


$149.00
$134.10
You save: 10%
Click to read more
P-A-MOD12-50Speaker - Jensen® MOD®, 12", MOD12-50, 50W

Warm, well balanced tone with low end focus. It responds to overdrive distortion with a rich smooth crunch and bright lead-voice fuzz.


$59.04
$53.14
You save: 10%
Click to read more
P-A-P10RSpeaker - Jensen® Vintage Alnico, 10", P10R, 25W

The P10R has a rich, warm tone. In addition, it accentuates the higher frequencies in sparkling detail.


$123.50
$111.15
You save: 10%
Click to read more
P-A-RX14Driver - Peavey, 1", RX 14, 60W

1" throat diameter, 8 ohms, 60 watts, 1.5-20k response.



  • Diameter: 1.4"
  • Throat Parameter: .938" / 23.8 mm
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 7.1 Ohms
  • DC Resistance: 6.8 Ohms
  • Power Capacity 1000 Hz to 20,000 Hz: 120 W peak, 60 W program, 30 W continuous
  • Sensitivity: 104 dB SPL 1 Watt at 1 meterOn-axis on 90° H x 45° V horn
  • Nominal Efficiency: 30%
  • Frequency Response: 1.5 kHz to 20 kHz
  • Recommended Crossover: 1,800 Hz at 12 dB / Octave
  • Lowest Recommended

$62.95
$56.66
You save: 10%
Click to read more
P-AB-1502-8Speaker Basket - Peavey, 1502-8 DT BW RB, 8Ω

Peavey Black Widow Super Structure Replacement Basket (1502-8 DT BW™ RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$99.95
$89.96
You save: 10%
Click to read more

Pages

(48 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Speakers