Speakers & Components

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.
P-A-MOD8-20 Speaker - Jensen® MOD®, 8", MOD8-20, 20W
The Mod 8-20 is a 8" ferrite speaker with 20 watts of power. Straightforward tone with smooth highs and more predominant lows. It responds to overdrive distortion with a mellow fuzz overdrive.
$31.53
P-A-C6V Speaker - Jensen® Vintage Ceramic, 6", C6V, 20W
The smallest ceramic guitar speaker in the Jensen range, the C6V has a smooth tone with rich midrange, excellent detail on the top end, and a convincing bass range for its size. The 20W power handling ensures good headroom, dynamics and articulation, even with mid and high gain tones.
$31.46
P-A-APT50-8 Driver - Eminence®, 1", APT:50, 35W, 8Ω
Special Order Item
HF compression driver, 1" throat and ceramic magnet.
$29.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5829 Speaker - Celestion, 1", CDX1-1010, 15W, 8Ω
Special Order Item
Ferrite magnet compression driver. Ideal for entry-level two-way and three-way sound reinforcement cabinets
$29.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5503X Diaphragm - Celestion, Aluminum for CDX1-14
Special Order Item
Celestion diaphragm for CDX1-14 compression drivers
$29.99
Note: special order items require additional lead time. See our page on special order items.
P-A-F110M-8 Driver - Eminence®, 1", F110M, 8Ω
Special Order Item
The next addition to the Eminence compression driver family. The F110M-8 offers all the performance benefits of our new ring radiator devices in a smaller format which performs remarkably well on screw on type horns or coaxial woofers.
$29.99
Out of Stock
P-A-MOD5-30 Speaker - Jensen® MOD®, 5", MOD5-30, 30W, 8Ω
The Mod 5-30 is a 5" ferrite speaker with 30 watts of power. It is a great replacement for Trace Elliot amps.
$29.48
P-A-G8C-15-X Speaker - Celestion, 8", Ceramic Eight 15, 15W
The Eight 15 is ideal for upgrading your bedroom blaster with authentic British tone. Well-balanced mids and highs complement a surprisingly meaty bottom end - it's just about the biggest sounding eight inch speaker we've ever heard!
$29.00
P-A-PX-LPAD-8 Crossover L-Pad - Eminence®, PX-LPAD, 100W
Special Order Item
L-Pad crossover - cab ready. Recommended for LF and HF level matching unless using coax crossover.
  • Impedance: 8 ohms
  • Power Handling: 100W
$24.99
Note: special order items require additional lead time. See our page on special order items.
P-A-TOPHAT-CH Speaker Stand - Eminence®, Top Hat CH
Special Order Item
The Top Hat CH is an adjustable-angle speaker stand receptacle for loudspeaker boxes. The vertical angle can be adjusted in 4° increments to +/- 18°. The Top Hat CH fits SPS56B and most other standard speaker stands.
$24.99
Note: special order items require additional lead time. See our page on special order items.
P-A-ALPHA-3-X Speaker - Eminence® American, 3", Alpha 3, 60W
Special Order Item
The Eminence Alpha 3 is a truly versatile compact full-range driver perfectly suited for tight fitting pro audio line array and column array applications. With a program power rating of 70 watts, this 3" driver utilizes an 8.3 oz ferrite magnet in conjunction with an internal neodymium bucking magnet for increased sensitivity and extends the response out to 20kHz. The highly pressed cone sandwiches paper with a layer of water-resistant polypropylene for increased stiffness and lower distortion.
$24.99
Out of Stock
P-A-MOD6-15 Speaker - Jensen® MOD®, 6", MOD6-15, 15W
The Mod 6-15 is a 6" ferrite speaker with 15 watts of power. It is a good upgrade for small practice amps.
$23.21
P-A-BH410 Horn Flare - Eminence®, BH410, Exponential, 60 x 60 Dispersion
Special Order Item
Exponential type horn flare with 60 x 60 dispersion.
$19.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5549 Diaphragm - Celestion, PETP for CDX1-14, 8Ω
Special Order Item
Celestion diaphragm for 8 ohm versions of CDX1-14 compression drivers
$19.99
Note: special order items require additional lead time. See our page on special order items.
P-A-ASD1001-DIA Diaphragm - Eminence®, 1'', for ASD:1001 and ASD:1001B
Genuine Eminence 1" replacement diaphragm for ASD:1001 and ASD:1001B series drivers.Titanium, 8 ohms.
$19.99
P-A-ALPHA-APT30 Supertweeter - Eminence®, APT:30, 10W, 8Ω, 80° conical
Special Order Item
The Eminence APT30 horn loaded tweeter offers exceptional high frequency reproduction at an exceptional value. Rated at 10 watts AES, this ultra-compact unit features a 2 oz. ferrite magnet, aluminum voice coil former, and mylar diaphragm. With an average SPL rating of 93.4 dB and a max SPL of 116.5 dB, the APT30 is designed to deliver big performance in very limited spaces. From small bass rigs to home hi-fi applications, the APT30 can go where other devices simply can't.
$19.99
Out of Stock
P-A-SD28 Supertweeter - Eminence®, SD28, 10W, 4Ω, 60˚ Dispersion
Special Order Item
The Eminence SD28 soft-dome tweeter offers unmatched performance to value in an ultra-compact design. With an overall diameter of less than 1.5 inches, this 4 ohm silk dome tweeter delivers smooth high frequency reproduction from 1.5 to 20 kHz. Perfect for car audio, ATV, RV, or any other application where space is limited.
$19.99
Out of Stock
P-A-T5359_M Horn - Celestion, H1-9040P, Exponential 90˚ x 40˚ Radiation Pattern
Special Order Item
Compatible for use with bolt (flange) fitted compression drivers
$14.50
Note: special order items require additional lead time. See our page on special order items.
P-A-B2SA Adapter - Eminence®, B2S-A for screw-on horns
Special Order Item
The B2S-A aluminum adapter converts bolt-on driver to accept a screw-on horn. 2 x 1/4-20 or 3x M6 driver to 1-3/8" 18 UNEF horn.
$12.99
Note: special order items require additional lead time. See our page on special order items.
P-A-S2B-A Adapter - Eminence®, S2B-A for bolt-on horns
Special Order Item
The S2B-A aluminum adapter converts screw-on driver to accept a bolt-on horn. 1-3/8" 18 UNEF ext. driver to 2 x 1/4-20 or 3x M6 horn.
$12.99
Note: special order items require additional lead time. See our page on special order items.
P-A-HA1-14 Horn Adapter - Eminence®, HA1-14, 1" to 1.4" bolt-on
Special Order Item
Use the HA1-14 to pair a 1” bolt-on horn or driver with a 1.4” bolt-on device.
$12.99
Out of Stock
P-A-HA14-1S Horn Adapter - Eminence®, HA14-1S, 1.4" to 1" screw-on
Special Order Item
Aluminum horn adapter for converting 1.4” exit drivers to 1” entry horns screw on
$12.99
Out of Stock
P-A-HA14-2 Horn Adapter - Eminence®, HA14-2, 1.4" to 2" bolt-on
Special Order Item
The HA14-2 mates a 1.4” bolt-on horn or driver with a 2” bolt-on device
$12.99
Out of Stock
P-A-APT150S Horn Flare - Eminence®, APT:150S, Constant Directivity, 100 x 50 Dispersion
Special Order Item
Constant directivity type horn flare with 1" throat size and 100 x 50 dispersion
$10.99
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!