Speakers & Components

The Tornado Stealth 100 is the original Tornado 12, the first of the new generation of Neodymium speakers in the Jensen offering with an added stylish bell cover over the magnet. Possibly the most versatile Jensen speaker ever, it has clear, almost HD top end, well-balanced midrange and powerful bass end. It lends itself to a wide range of musical genres, with a smooth, never aggressive personality, from fast solo runs, to complex chordal harmonies, to soulful lead tones.

Few speakers speak ‘classic rock’ like the Neodymium powered Tornado Stealth 65. Sharing a similar 1 ¾” voice coil design with the Nighthawk, it delivers vintage and modern rock tones with ease and authority. With a well-controlled top end, a typical British-voiced midrange and fat, warm bass range, the Tornado Stealth 65 is an ideal choice for classic flavored rock tones. Very easy to drive for any amplifier, it allows even the smaller sized open back combo amps to rock with bigger-than-life tones.

The Tornado Stealth 80 is the Neodymium counterpart of the ceramic powered Electric Lightning. The Stealth 80 is extremely efficient, with slightly scooped mids, and it shines in the cleanest as well as in the heaviest tonal applications. It delivers exceptional punch and attack, retaining all the clarity needed for palm-muted riffs and power chords, as well as crystal clear clean rhythm playing.

The Blackbird 12 is one of most revered speakers in the range. Not only does this AlNiCo guitar speaker have the highest (100W) power handling available, but it also offers the most refined tones. Powerful, warm bass range, balanced mids, sparkling highs, with both chime and smoothness. Excellent for the most high-end applications, where the details and the harmonic spread make a difference for the discerning users.

Lead/rhythm guitar 10" speaker. Vintage American tone with punchy lows and warm, smooth, bluesy mids and highs. Fatter Legend 1028K tone with more depth.

Lead/rhythm guitar 12" speaker. Vintage American tone with tight lows and warm, smooth mids and highs. Strong upper mid emphasis and extended highs.

The Mod 10-70 is a 10" ferrite speaker with 70 watts of power. Thick, straightforward tone and fat bass frequencies. It exhibits a bass heavy, dirty grit when presented with overdrive distortion.

The Mod 12-70 is a 12" ferrite speaker with 70 watts of power. The MOD12-70 is loud, dynamic, and well defined. It has a defined warm crunch response to overdrive distortion.

The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle. Guitarist Description: Heavy on the mids with a solid, straightforward tone. Presented with overdrive distortion, it powers through with lows that are bold and heavy.

• Lows: Tight
• Mids: Aggressive
• Highs: Subtle
• Overdrive: Edgy/Crunchy

For the 8 ohm version, see P-A-N12K-8

The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle.

Lead/rhythm guitar 10" American speaker, 8 ohm. Very loud, touch sensitive and responsive with nice bell sounding top end and a little bite.

Lead/rhythm guitar 10" British speaker. Very loud, gutsy, and meaty tone with singing highs and nice, clear overtones

8" low frequency driver providing 94dB sensitivity.

Ferrite magnet pressed steel chassis driver

Ferrite magnet pressed steel chassis driver.

Built for bass without compromise, the 100-watt BL10-100X is a 10 inch bass guitar speaker that delivers heavy duty presence with drive, clarity and a full-bodied tone.

Neodymium magnet compression driver

Speaker, Celestion, CDX20-3000, 2 in. Features:

• 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
• Patented phase plug design method suppresses cavity resonances at higher frequencies
• Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
• Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
• Rolled polyimide surround improves stiffness control, further lowering distortion
• Curved coherent wavefront, optimised for horn loading

Neodymium magnet compression driver

Speaker, Celestion, CDX14-3060, 1.4 in., 8 ohm Features:

• 1.4" exit, ferrite magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 106.5dB sensitivity
• Patented phase plug design method suppresses cavity resonances at higher frequencies
• Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
• Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
• Rolled polyimide surround improves stiffness control, further lowering distortion
• Curved coherent wavefront, optimised for horn loading

Speaker, Celestion, CDX20-3075, 2 in., 8 ohm Features:

• 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
• Patented phase plug design method suppresses cavity resonances at higher frequencies
• Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
• Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
• Rolled polyimide surround improves stiffness control, further lowering distortion
• Curved coherent wavefront, optimised for horn loading

Ferrite magnet compression driver

Speaker, Celestion, TF0615, 6 in., 8 ohm Features:

• 6" mid-range driver providing 95dB sensitivity and 100Wrms (AES standard) power handling
• 1.5" high temperature copper voice coil wound on polyimide former for increased reliability
• Rigid chassis design for maximum energy transfer
• Vented magnet assembly for enhanced cooling
• Achieves optimal performance in compact enclosures
• Ideal for 2-way systems

Speaker, Celestion, CDX14-3030, 1.4 in, 8 ohm Features:

• 1.4" exit, ferrite magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 106.5dB sensitivity
• Next generation Sound Castle™ soft clamping assembly reduces diaphragm stress for decreased distortion and even greater reliability of performance
• One piece titanium diaphragm and surround
• Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design