Speakers & Components

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.

Celestion

Founded in 1924, Celestion has grown to become one of the world's largest manufacturers of loudspeakers.
P-A-PULSE10-8 Speaker - Celestion, 10", Pulse 10, 200W, 8Ω
With its robust steel-chassis, the PULSE10 provides a rock-solid bass performance whether alone in a single speaker combo, in a 4x10 or even an 8x10 cab. Expect a tight, punchy low end with a warm mid-range that's full of presence, bringing focus and articulation to your playing. This heavy-duty driver truly delivers bass you can feel as well as hear.
$69.00
On Backorder
P-A-PULSE12-8 Speaker - Celestion, 12", Pulse 12, 200W, 8Ω
For bass players demanding well-defined clarity and stunning articulation together with a rich, full tone, PULSE12 bass speakers deliver an ideal combination of responsiveness and rock solid low end. The Kevlar-loaded cone pulses with up to 200 watts of raw bass power. Expect each note to deliver a thick, percussive attack along with the mid-range necessary to break through in any performance situation.
$79.00
On Backorder
P-A-T5363X Speaker - Celestion, 1", CDX1-1745, 40W
Special Order Item
Ferrite magnet compression driver
  • 1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
  • 40Wrms power handling (AES standard) and 110dB sensitivity
  • Sound CastleTM clamping ensures even pressure on diaphragm assembly for reduced distortion
  • One piece PETP diaphragm and surround
  • Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design
$79.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5683X Speaker - Celestion, 2", CDX20-3000, 75W
Special Order Item
Speaker, Celestion, CDX20-3000, 2 in.
Features:
  • 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading
$439.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5503X Diaphragm - Celestion, Aluminum for CDX1-14
Special Order Item
Celestion diaphragm for CDX1-14 compression drivers
$29.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5510X Diaphragm - Celestion, PETP for CDX1-17
Special Order Item
Celestion PETP diaphragm for CDX1-17 compression drivers
$34.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5526X Diaphragm - Celestion, Titanium for CDX14 and CDX20
Special Order Item
Celestion diaphragm for CDX14 and CDX20 compression drivers
$129.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5534X Recone Kit - Celestion, for G12M and G12H Heritage
Special Order Item
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12M Heritage and G12H Heritage editions
$69.99
Note: special order items require additional lead time. See our page on special order items.
P-A-PULSE15-8 Speaker - Celestion, 15", Pulse 15, 400W, 8Ω
With a longer voice coil for increased "throw" and a multi-roll surround that provides exceptional linearity and superb bass extension, the 400-watt PULSE 15 is impeccably-designed sonic artillery. Featuring a Kevlar-loaded cone and rigid steel chassis designed for maximum energy transfer, this robust and reliable speaker truly is a powerhouse of deep bass tone.
$119.00
On Backorder
K-RC-G12-65-8 Recone Kit - Celestion, G12-65 / Classic Lead 80, 8 Ohm
Special Order Item
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion 8 ohm G1280 (our SKU P-A-G1280-8) and 8 ohm G12-65-8 (our SKU P-A-G12-65-8).
$52.15
Out of Stock
P-A-T5387 Speaker - Celestion, 15", FTR15-3070C, 400W, 8Ω
Special Order Item
Speaker, Celestion, FTR15-3070C, 15 in., 8 ohm Features:
  • 15" ferrite woofer provides 400Wrms power handling (AES Standard) and 99dB sensitivity
  • 3" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • Flexirol TM surround for greater excursion control
  • Saturated gap technology for lower harmonic distortion
  • Low frequency response, down to 40Hz
  • Smart chassis design minimises acoustic distortion
$159.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5402 Speaker - Celestion, 12", K12H-100TC, 100W, 8Ω
Special Order Item
Ferrite magnet pressed steel chassis driver.
$80.00
Note: special order items require additional lead time. See our page on special order items.
P-A-T5635 Speaker - Celestion, 15", BL15-300X, 300W, 4Ω
Special Order Item
Not every player wants a super-clean, high-fidelity bass sound. Characterised by an extended low end and greater linear excursion, Green Label speakers push out every note with a rich, warm tone and a powerful low-end thump. Green Label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.
$94.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5537 Recone Kit - Celestion, For Heritage G12, 15Ω
Special Order Item
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12 Heritage 15 ohm
$69.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5343 Speaker - Celestion, 1", CDX1-1415, 20W, 8Ω
Special Order Item
Neodymium magnet compression driver
$109.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5344 Speaker - Celestion, 1", CDX1-1425, 25W, 8Ω
Special Order Item
Neodymium magnet compression driver
$119.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5367 Speaker - Celestion, 1", CDX1-1430, 50W, 8Ω
Special Order Item
Neodymium magnet compression driver
$124.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5458 Speaker - Celestion, 15", FTR15-4080F, 600W, 8Ω
Special Order Item
Speaker, Celestion, FTR15-4080F, 15 in., 8 ohm Features:
  • 15" ferrite woofer provides 600Wrms power handling (AES Standard) and 97dB sensitivity
  • 4" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • Flexirol TM surround for greater excursion control
  • Low frequency response, down to 35Hz
  • Smart chassis design minimises acoustic distortion
  • Specially treated weather-resistant cone
$179.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5459 Speaker - Celestion, 15", FTR15-4080FD, 1000W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$194.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5460 Speaker - Celestion, 18", FTR18-4080FD, 1000W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$249.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5485 Speaker - Celestion, 1", CDX1-1730, 40W, 8Ω, flange
Special Order Item
Neodymium magnet compression driver, flange version
  • 1" exit, neodymium magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
  • 40Wrms (AES standard) power handling and 110dB sensitivity
  • Designed with Sound CastleTM clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion
  • One piece PETP film diaphragm and surround
  • Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression driver
$159.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5486 Speaker - Celestion, 1", CDX1-1731, 40W, 8Ω, screw
Special Order Item
Neodymium magnet compression driver, screw version
  • 1" exit, neodymium magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
  • 40Wrms (AES standard) power handling and 110dB sensitivity
  • Designed with Sound CastleTM clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion
  • One piece PETP film diaphragm and surround
  • Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression driver
$159.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5487 Speaker - Celestion, 1", CDX1-1746, 40W, 8Ω
Special Order Item
Ferrite magnet compression driver
$79.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5491 Speaker - Celestion, 12", NTR12-3018D, 350W, 8Ω
Special Order Item
Speaker, Celestion, NTR12-3018D, 12", 8 ohm.
$399.99
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!