Products
No product page found for product speakers.
Showing search results for speakers
Showing results for speaker. Search instead for speakers
Speaker - Celestion, 2", CDX20-3000, 75W
Special Order Item
Speaker, Celestion, CDX20-3000, 2 in. Features:- 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
- Patented phase plug design method suppresses cavity resonances at higher frequencies
- Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
- Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
- Rolled polyimide surround improves stiffness control, further lowering distortion
- Curved coherent wavefront, optimised for horn loading
$439.99
Speaker - Celestion, 8", FTR08-2011D, 200 watts
Special Order Item
Speaker, Celestion, FTR08-2011D, 8 in., 8 ohm Features:- 8" ferrite magnet driver providing 200Wrms (AES standard) power handling and 93dB sensitivity
- 2" high temperature copper voice coil
- Suitable for line array applications, utilizing a space-efficient octagonal chassis profile
- Optimized flux distribution in magnet assembly provides low harmonic distortion
- “M-Roll” surround provides progressive excursion control, generating a smooth frequency response
- Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
$95.15
Speaker - Eminence® Patriot, 10", The Copperhead, 75W, 8Ω
Special Order Item
Lead/rhythm guitar 10" speaker. Extremely balanced vintage tone with a little country honk and a touch of classic blues tone.
$99.99
Out of Stock
Speaker - Celestion, 8", NTR08-2009D, 200W, 8Ω
Special Order Item
Speaker, Celestion, NTR08-2009D, 8 in., 8Ω.
$349.99
Speaker - Celestion, 1", CDX1-1747, 60W, 8Ω
Special Order Item
Ferrite magnet compression driver
$91.65
Speaker - Celestion, 10", T.F. Series 1020, 150W 8Ω
Special Order Item
The 1020 is a bass and mid range driver with a high sensitivity. It is ideally suited to compact enclosures and high pass systems.
$73.75
Out of Stock
Speaker - Eminence® American, 6", Alpha 6, 100W, 8 Ω
Special Order Item
American Standard Series 6" speaker. Recommended for professional audio mid-range applications in a sealed cabinet, or as a mid-bass in a vented satellite enclosure.
$74.99
Out of Stock
Bulk Cable - ProCo, Speaker, 2 Conductor, Non-shielded
Make your own cable. Excellines 16AWG two conductor non-shielded cable is sold by the foot.
$1.15
Sold by the foot
Screw - 8-32, #12 Reverse Thread, Speaker Baffle Mount
High-quality 8/32 machine screws with #12 reverse wood screw threading at the head. These screws are a simple solution for mounting speakers to baffle boards and were commonly used on many vintage amplifiers. Nuts sold separately.
$0.79
package of 4
Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
$0.89
Terminal Board - for Speaker Frames
Two lug terminal boards for speaker frames. This board can be used to repair speakers with damaged or missing wire mount boards.
$1.00
Cable - ProCo Stagemaster, for Speaker
ProCo StageMaster cables are designed to be quiet, durable and dependable. Constructed from high quality materials and built to withstand everyday use. They are hand-soldered to perfection using top quality metal 1/4” connectors and extremely low-noise cable.
Starting at $10.45
Clamp - Speaker Grill Mount, Plastic
Black plastic clamp for mounting speaker grills. Sold individually, mounting hardware not included.
$0.85
Screws - Original Fender, Vintage Speaker Mounting Stud / Nut
Original Fender speaker mounting stud/nut set. These speaker mounting studs were used on countless amps of the '50s, '60s, '70s, and beyond. The reverse thread section screws into the baffle wood and the machine screw section holds the speaker in place using the included keps nuts.
Fender part number: 099-2094-000
- Used on early ’50s and ’60s vintage amplifiers
- Fits most vintage and modern amplifiers
- 1” of 8-32 machine head thread
- ¼” of reverse wood thread
- 1-½” overall length
- 8-32 keps nuts included
Fender part number: 099-2094-000
$8.95
package of 12
Jack Plate - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
- Diameter = 3 3/4''
- Center to Center Screw Hole Spacing Distance = 2 1/8''
$7.15
Out of Stock
Gaskets - Jensen®, for speaker cabinets
Set of speaker gaskets for spacing/protection of your Jensen speaker. These will work in any cabinet, and are especially popular in Leslie cabinets. Four gaskets is enough for one speaker.
$5.85
package of 4
Cable - ProCo Excellines, for Speaker
Professional grade ProCo Excelline premium speaker cable. ProCo Excelline cables just work, assuring that the only distortion in your sound comes from your pedal-board. Sometimes buzz or distortion is good—but not when it comes from a bad cable. 2-conductor, 16 AWG. Made In USA.
Starting at $13.95
Bell Cover - Jensen®, for Alnico R and Q Type Speakers
For use on the Jensen P-A-P8R, P-A-P10R, P-A-P10R-FEN, P-A-P12R, P-A10Q and P-A-P12Q. Jensen bell covers are a throwback to the style of classic Jensen speakers from the 1950s and '60s that can complete the look of a vintage or vintage-inspired amplifier.
$29.00
HPC Loudspeaker - Switchcraft, panel mount, 2-pole
HPC Loudspeaker, panel-mount connector, 0.1" recessed flange, 0.140" dia. hole, Faston 0.250" termination. Mates with W-SC-HPCC4F
Starting at $4.85
Bell Cover - Jensen Blackbird Speakers
Bell cover for 12" 100W Blackbird speakers. Jensen bell covers are a throwback to the style of classic Jensen speakers from the 1950s and '60s that can complete the look of a vintage or vintage-inspired amplifier.
$35.00
Recone Kit - Celestion, For G12T-75 8Ω Guitar Speaker
Special Order Item
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12T75 8Ω speaker (our SKU P-A-G12T75-8).
$60.00
Out of Stock
Bell Cover - Jensen®, for Alnico N Type Speakers
For use on Jensen P-A-P15N and P-A-P12N-NB to complete the vintage look of the originals. Jensen bell covers are a throwback to the style of classic Jensen speakers from the 1950s and '60s that can complete the look of a vintage or vintage-inspired amplifier.
$35.00
Recone Kit - Celestion, For G12 Blue Guitar Speaker
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12 Alnico Blue (our SKU's P-A-G12-8 and P-A-G12-15)
$115.00
Wood Tack - Screw Nail, Steel, 20mm
Steel 20mm screw nails for corners, logos, badges, and more. These screw nails make adding cabinet accessories easy requiring only a mallet for installation. The design is great for speaker cabinets ensuring a better grip than standard nails and tacks under extreme vibrations.
$0.35