Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
Speaker - Jensen® Vintage Ceramic, 15", C15N, 50W
The Blackface era sibling of the P15N is a powerful, open sounding speaker with a cutting presence on the full range of frequencies. The C15N is very efficient and delivers dynamic, high-headroom and punchy tone from bass to trebles. It is the first-choice speaker for many pedal steel and blues players. It is very commonly found in Pro® and Vibrolux® amps in the ‘60s and is used in the low frequency drum of the Leslie® 122 and 147 amplifiers.
Guitarist Description: Tight low-end and clear, bright highs. Responds to overdrive distortion with a gritty edge.
- Lows: Fat
- Mids: Aggressive
- Highs: Bright
- Overdrive: Smooth
For more information about our Jensen® speakers, see our tech corner article on Jensen Speakers.
SKU:
P-A-C15N
Item ID:
001924
Brand:
JensenJensen VintageCeramic
Magnet Type:
Size:
Type:
RoHS Compliant
| Impedance | Our Part Number | UPC/EAN | Jensen Part Number |
|---|---|---|---|
| 16 Ω | P-A-C15N-16 | 8034028641831 | ZJ07060 |
| 8 Ω | P-A-C15N-8 | 8034028640605 | ZJ07050 |
| Basket Material | Pressed Sheet Steel | ||
| Cone Material | Paper | ||
| Depth | 5.807 in. | ||
| Diameter | 15 in. | ||
| Diaphragm Area (SD) | 754.80 cm2 | ||
| Dust Dome Material | Solid Paper | ||
| Equivalent Acoustic Volume (VAS) | 8 Ω version | P-A-C15N-8 | 70.30 liters |
| 16 Ω version | P-A-C15N-16 | 74.40 liters | |
| Flux Density | 1.00 T | ||
| Force Factor (BxL) | 8 Ω version | P-A-C15N-8 | 10.85 Wb/m |
| 16 Ω version | P-A-C15N-16 | 12.81 Wb/m | |
| Inner Diameter | 14.0945 in. | ||
| Linear Displacement, maximum (XMAX) | 1.00 mm | ||
| Losses Electrical Resistance (RES) | 8 Ω version | P-A-C15N-8 | 39.00 Ω |
| 16 Ω version | P-A-C15N-16 | 57.00 Ω | |
| Magnet Assembly Depth | 8 Ω version | P-A-C15N-8 | 1.1811 in. |
| 16 Ω version | P-A-C15N-16 | 1.811 in. | |
| Magnet Assembly Diameter | 5.2755 in. | ||
| Magnet Type | Ferrite | ||
| Magnetic Gap Depth | 8.00 mm | ||
| Mechanical Compliance (CMS) | 8 Ω version | P-A-C15N-8 | 87.00 µm/N |
| 16 Ω version | P-A-C15N-16 | 92.00 µm/N | |
| Mechanical Moving Mass (MMS) | 8 Ω version | P-A-C15N-8 | 54.70 g |
| 16 Ω version | P-A-C15N-16 | 51.00 g | |
| Mechanical Q Factor (QMS) | 8 Ω version | P-A-C15N-8 | 6.80 |
| 16 Ω version | P-A-C15N-16 | 8.48 | |
| Mounting Hole Bolt Circle Diameter | 14.6457 in. | ||
| Mounting Hole Diameter | 0.2362 in. | ||
| Musical Power | 100.00 W | ||
| Nominal Overall Diameter | 385.00 mm | ||
| Nominal Voice Coil Diameter | 38.00 mm | ||
| Outer Diameter | 15.0787 in. | ||
| Rated Power | 50.00 W | ||
| Reference Efficiency (nO) | 8 Ω version | P-A-C15N-8 | 2.84 % |
| 16 Ω version | P-A-C15N-16 | 1.61 % | |
| Resonance Frequency (ƒS) | 8 Ω version | P-A-C15N-8 | 73.00 Hz |
| 16 Ω version | P-A-C15N-16 | 73.50 Hz | |
| Sensitivity @ 1W, 1m | 8 Ω version | P-A-C15N-8 | 96.30 dB |
| 16 Ω version | P-A-C15N-16 | 95.40 dB | |
| Surround Material | Integrated Paper | ||
| Surround Treatment | Yes | ||
| Total Q Factor (QTS) | 8 Ω version | P-A-C15N-8 | 1.11 |
| 16 Ω version | P-A-C15N-16 | 1.46 | |
| Voice Coil DC Resistance (Re) | 8 Ω version | P-A-C15N-8 | 6.20 Ω |
| 16 Ω version | P-A-C15N-16 | 12.30 Ω | |
| Voice Coil Diameter | 1.5 in. | ||
| Voice Coil Former | Kapton | ||
| Voice Coil Inductance @ 1 kHZ (LE) | 8 Ω version | P-A-C15N-8 | 0.93 mH |
| 16 Ω version | P-A-C15N-16 | 1.28 mH | |
| Voice Coil Winding Depth | 10.00 mm | ||
| Voice Coil Winding Type | Copper |
| Packaging Dimensions | 16.5354 in. × 16.1417 in. × 8.2677 in. | |
| Weight (Packaging) | 10.7 lbs. |
| P-A-C15N-16 - 16 Ω version | Basket Material | Pressed Sheet Steel |
| Cone Material | Paper | |
| Depth | 5.807 in. | |
| Diameter | 15 in. | |
| Diaphragm Area (SD) | 754.80 cm2 | |
| Dust Dome Material | Solid Paper | |
| Equivalent Acoustic Volume (VAS) | 74.40 liters | |
| Flux Density | 1.00 T | |
| Force Factor (BxL) | 12.81 Wb/m | |
| Inner Diameter | 14.0945 in. | |
| Linear Displacement, maximum (XMAX) | 1.00 mm | |
| Losses Electrical Resistance (RES) | 57.00 Ω | |
| Magnet Assembly Depth | 1.811 in. | |
| Magnet Assembly Diameter | 5.2755 in. | |
| Magnet Type | Ferrite | |
| Magnetic Gap Depth | 8.00 mm | |
| Mechanical Compliance (CMS) | 92.00 µm/N | |
| Mechanical Moving Mass (MMS) | 51.00 g | |
| Mechanical Q Factor (QMS) | 8.48 | |
| Mounting Hole Bolt Circle Diameter | 14.6457 in. | |
| Mounting Hole Diameter | 0.2362 in. | |
| Musical Power | 100.00 W | |
| Nominal Overall Diameter | 385.00 mm | |
| Nominal Voice Coil Diameter | 38.00 mm | |
| Outer Diameter | 15.0787 in. | |
| Rated Power | 50.00 W | |
| Reference Efficiency (nO) | 1.61 % | |
| Resonance Frequency (ƒS) | 73.50 Hz | |
| Sensitivity @ 1W, 1m | 95.40 dB | |
| Surround Material | Integrated Paper | |
| Surround Treatment | Yes | |
| Total Q Factor (QTS) | 1.46 | |
| Voice Coil DC Resistance (Re) | 12.30 Ω | |
| Voice Coil Diameter | 1.5 in. | |
| Voice Coil Former | Kapton | |
| Voice Coil Inductance @ 1 kHZ (LE) | 1.28 mH | |
| Voice Coil Winding Depth | 10.00 mm | |
| Voice Coil Winding Type | Copper | |
| P-A-C15N-8 - 8 Ω version | Basket Material | Pressed Sheet Steel |
| Cone Material | Paper | |
| Depth | 5.807 in. | |
| Diameter | 15 in. | |
| Diaphragm Area (SD) | 754.80 cm2 | |
| Dust Dome Material | Solid Paper | |
| Equivalent Acoustic Volume (VAS) | 70.30 liters | |
| Flux Density | 1.00 T | |
| Force Factor (BxL) | 10.85 Wb/m | |
| Inner Diameter | 14.0945 in. | |
| Linear Displacement, maximum (XMAX) | 1.00 mm | |
| Losses Electrical Resistance (RES) | 39.00 Ω | |
| Magnet Assembly Depth | 1.1811 in. | |
| Magnet Assembly Diameter | 5.2755 in. | |
| Magnet Type | Ferrite | |
| Magnetic Gap Depth | 8.00 mm | |
| Mechanical Compliance (CMS) | 87.00 µm/N | |
| Mechanical Moving Mass (MMS) | 54.70 g | |
| Mechanical Q Factor (QMS) | 6.80 | |
| Mounting Hole Bolt Circle Diameter | 14.6457 in. | |
| Mounting Hole Diameter | 0.2362 in. | |
| Musical Power | 100.00 W | |
| Nominal Overall Diameter | 385.00 mm | |
| Nominal Voice Coil Diameter | 38.00 mm | |
| Outer Diameter | 15.0787 in. | |
| Rated Power | 50.00 W | |
| Reference Efficiency (nO) | 2.84 % | |
| Resonance Frequency (ƒS) | 73.00 Hz | |
| Sensitivity @ 1W, 1m | 96.30 dB | |
| Surround Material | Integrated Paper | |
| Surround Treatment | Yes | |
| Total Q Factor (QTS) | 1.11 | |
| Voice Coil DC Resistance (Re) | 6.20 Ω | |
| Voice Coil Diameter | 1.5 in. | |
| Voice Coil Former | Kapton | |
| Voice Coil Inductance @ 1 kHZ (LE) | 0.93 mH | |
| Voice Coil Winding Depth | 10.00 mm | |
| Voice Coil Winding Type | Copper |
 Specification Sheet | All Models |
 Blues Sound Sample | All Models |
| Clean Sound Sample | All Models |
| Country Sound Sample | All Models |
| Jazz Sound Sample | All Models |
| Metal Sound Sample | All Models |
| Overdriven Sound Sample | All Models |
| Rock Sound Sample | All Models |
 Terminal Dimensions | All Models |
My Project Lists
Specifications, Files, and Documents
Sound Samples:
Blues Sound Sample00:49https://www.amplifiedparts.com/sites/default/files/associated_files/c15n_blues.mp3
Clean Sound Sample00:19https://www.amplifiedparts.com/sites/default/files/associated_files/c15n_clean.mp3
Country Sound Sample00:35https://www.amplifiedparts.com/sites/default/files/associated_files/c15n_country.mp3
Jazz Sound Sample00:43https://www.amplifiedparts.com/sites/default/files/associated_files/c15n_jazz.mp3
Metal Sound Sample00:53https://www.amplifiedparts.com/sites/default/files/associated_files/c15n_metal.mp3
Overdriven Sound Sample00:18https://www.amplifiedparts.com/sites/default/files/associated_files/c15n_overdriven.mp3
Rock Sound Sample00:43https://www.amplifiedparts.com/sites/default/files/associated_files/c15n_rock.mp3
Update Required To play the media you will need to either update your browser to a recent version or update your Flash plugin.
Terminal Dimensions Questions and Answers
Click each question to see its answers.
1 answers
I have a vintage altec lancing that is like an icepick, will this speaker mellow the tone? I am running a vibroverb clone. Thanks! Bryan Schang
Asked by Anonymous on June 3rd, 2018.
June 8th, 2018
Staff Member
Hello,
Without having hands on experience with the particular Altec Lansing speaker, we advise locating a frequency chart for your speaker and comparing it to the one above for the C15N. In our experience, this is a fairly bright speaker, so it may not be the ideal choice.
Related Products
Product Reviews