Speaker - Jensen® Vintage Alnico, 10", P10R, 25W

Jensen
Speaker - Jensen® Vintage Alnico, 10", P10R, 25W image 1
Speaker - Jensen® Vintage Alnico, 10", P10R, 25W image 2
Speaker - Jensen® Vintage Alnico, 10", P10R, 25W image 3
Speaker - Jensen® Vintage Alnico, 10", P10R, 25W image 4
Customer image:<br/>"Replacement speakers for my super reverb"
Customer image:<br/>"2 x 10&amp;quot; setup in my homemade pine cabinet "
Click to zoom in
Speaker - Jensen® Vintage Alnico, 10", P10R, 25W image 1Speaker - Jensen® Vintage Alnico, 10", P10R, 25W image 2Speaker - Jensen® Vintage Alnico, 10", P10R, 25W image 3Speaker - Jensen® Vintage Alnico, 10", P10R, 25W image 4
Customer Images:
Customer image: "Replacement speakers for my super reverb"Customer image: "2 x 10&amp;quot; setup in my homemade pine cabinet "

Speaker - Jensen® Vintage Alnico, 10", P10R, 25W

$125.95
In Stock
Free Shipping within continental U.S.

The P10R is very important in the history of Jensen speakers. Its shimmering, yet throaty and vibrant tone is one of the signatures of the Tweed era and inspired the start-up of the British tones. It was the first speaker reissued by Jensen, presented to a restricted panel of partners at the 1999 Summer NAMM show. The P10R is the speaker that contributed to the magical tone of the 4x10 Bassman® Tweed amps, the 4x10 Super Tweed Amps and the equally mythical 3x10 Bandmaster® amps.

Guitarist Description: Rich, warm tone. Accentuates the higher frequencies in sparkling detail.

  • Lows: Loose
  • Mids: Firm
  • Highs: Smooth
  • Overdrive: Crunchy

For more information about our Jensen® speakers, see our tech corner article on Jensen Speakers.

SKU:
P-A-P10R
Item ID:
001971
Brand:
JensenJensen VintageAlnico
Magnet Type:
Size:
RoHS Compliant
Part Numbers
ImpedanceOur Part NumberUPC/EANJensen Part Number
16 ΩP-A-P10R-168034028641497 ZJ05080
4 ΩP-A-P10R-48034028640094 ZJ05040
8 ΩP-A-P10R-88034028640100 ZJ05051
Basket MaterialPressed Sheet Steel
Cone MaterialPaper
Depth4.8031 in.
Diameter10 in.
Diaphragm Area (SD)4 Ω versionP-A-P10R-4330.00 cm2
8 Ω versionP-A-P10R-8330.10 cm2
16 Ω versionP-A-P10R-16330.00 cm2
Dust Dome MaterialFelt
Equivalent Acoustic Volume (VAS)4 Ω versionP-A-P10R-429.00 liters
8 Ω versionP-A-P10R-827.40 liters
16 Ω versionP-A-P10R-1629.50 liters
Flux Density0.96 T
Force Factor (BxL)4 Ω versionP-A-P10R-44.60 Wb/m
8 Ω versionP-A-P10R-85.83 Wb/m
16 Ω versionP-A-P10R-167.27 Wb/m
Inner Diameter9.0944 in.
Linear Displacement, maximum (XMAX)4 Ω versionP-A-P10R-40.80 mm
8 Ω versionP-A-P10R-80.80 mm
16 Ω versionP-A-P10R-160.75 mm
Losses Electrical Resistance (RES)4 Ω versionP-A-P10R-459.20 Ω
8 Ω versionP-A-P10R-8102.00 Ω
16 Ω versionP-A-P10R-16149.00 Ω
Magnet Assembly Depth1.9488 in.
Magnet TypeAlnico
Magnetic Gap Depth6.00 mm
Mechanical Compliance (CMS)4 Ω versionP-A-P10R-4189.00 µm/N
8 Ω versionP-A-P10R-8177.00 µm/N
16 Ω versionP-A-P10R-16193.00 µm/N
Mechanical Moving Mass (MMS)4 Ω versionP-A-P10R-413.70 g
8 Ω versionP-A-P10R-815.20 g
16 Ω versionP-A-P10R-1613.40 g
Mechanical Q Factor (QMS)4 Ω versionP-A-P10R-423.80
8 Ω versionP-A-P10R-814.83
16 Ω versionP-A-P10R-1623.40
Mounting Hole Bolt Circle Diameter9.6456 in.
Mounting Hole Diameter0.2559 in.
Musical Power50.00 W
Nominal Overall Diameter259.00 mm
Nominal Voice Coil Diameter25.00 mm
Outer Diameter10.1969 in.
Rated Power25.00 W
Reference Efficiency (nO)4 Ω versionP-A-P10R-41.85 %
8 Ω versionP-A-P10R-81.70 %
16 Ω versionP-A-P10R-161.43 %
Resonance Frequency (ƒS)4 Ω versionP-A-P10R-499.00 Hz
8 Ω versionP-A-P10R-897.00 Hz
16 Ω versionP-A-P10R-1699.00 Hz
Sensitivity @ 1W, 1m4 Ω versionP-A-P10R-495.10 dB
8 Ω versionP-A-P10R-894.20 dB
16 Ω versionP-A-P10R-1694.70 dB
Surround MaterialIntegrated Paper
Surround TreatmentNo
Total Q Factor (QTS)4 Ω versionP-A-P10R-41.37
8 Ω versionP-A-P10R-81.62
16 Ω versionP-A-P10R-161.79
Voice Coil DC Resistance (Re)4 Ω versionP-A-P10R-43.60 Ω
8 Ω versionP-A-P10R-86.68 Ω
16 Ω versionP-A-P10R-1612.30 Ω
Voice Coil Diameter1 in.
Voice Coil FormerKapton
Voice Coil Inductance @ 1 kHZ (LE)4 Ω versionP-A-P10R-40.35 mH
8 Ω versionP-A-P10R-80.54 mH
16 Ω versionP-A-P10R-160.75 mH
Voice Coil Winding Depth8.00 mm
Voice Coil Winding TypeCopper
Packaging Information
Packaging Dimensions11.811 in. × 12.2047 in. × 6.6929 in.
Weight (Packaging)4.2483 lbs.
P-A-P10R-16 - 16 Ω versionBasket MaterialPressed Sheet Steel
Cone MaterialPaper
Depth4.8031 in.
Diameter10 in.
Diaphragm Area (SD)330.00 cm2
Dust Dome MaterialFelt
Equivalent Acoustic Volume (VAS)29.50 liters
Flux Density0.96 T
Force Factor (BxL)7.27 Wb/m
Inner Diameter9.0944 in.
Linear Displacement, maximum (XMAX)0.75 mm
Losses Electrical Resistance (RES)149.00 Ω
Magnet Assembly Depth1.9488 in.
Magnet TypeAlnico
Magnetic Gap Depth6.00 mm
Mechanical Compliance (CMS)193.00 µm/N
Mechanical Moving Mass (MMS)13.40 g
Mechanical Q Factor (QMS)23.40
Mounting Hole Bolt Circle Diameter9.6456 in.
Mounting Hole Diameter0.2559 in.
Musical Power50.00 W
Nominal Overall Diameter259.00 mm
Nominal Voice Coil Diameter25.00 mm
Outer Diameter10.1969 in.
Rated Power25.00 W
Reference Efficiency (nO)1.43 %
Resonance Frequency (ƒS)99.00 Hz
Sensitivity @ 1W, 1m94.70 dB
Surround MaterialIntegrated Paper
Surround TreatmentNo
Total Q Factor (QTS)1.79
Voice Coil DC Resistance (Re)12.30 Ω
Voice Coil Diameter1 in.
Voice Coil FormerKapton
Voice Coil Inductance @ 1 kHZ (LE)0.75 mH
Voice Coil Winding Depth8.00 mm
Voice Coil Winding TypeCopper
P-A-P10R-4 - 4 Ω versionBasket MaterialPressed Sheet Steel
Cone MaterialPaper
Depth4.8031 in.
Diameter10 in.
Diaphragm Area (SD)330.00 cm2
Dust Dome MaterialFelt
Equivalent Acoustic Volume (VAS)29.00 liters
Flux Density0.96 T
Force Factor (BxL)4.60 Wb/m
Inner Diameter9.0944 in.
Linear Displacement, maximum (XMAX)0.80 mm
Losses Electrical Resistance (RES)59.20 Ω
Magnet Assembly Depth1.9488 in.
Magnet TypeAlnico
Magnetic Gap Depth6.00 mm
Mechanical Compliance (CMS)189.00 µm/N
Mechanical Moving Mass (MMS)13.70 g
Mechanical Q Factor (QMS)23.80
Mounting Hole Bolt Circle Diameter9.6456 in.
Mounting Hole Diameter0.2559 in.
Musical Power50.00 W
Nominal Overall Diameter259.00 mm
Nominal Voice Coil Diameter25.00 mm
Outer Diameter10.1969 in.
Rated Power25.00 W
Reference Efficiency (nO)1.85 %
Resonance Frequency (ƒS)99.00 Hz
Sensitivity @ 1W, 1m95.10 dB
Surround MaterialIntegrated Paper
Surround TreatmentNo
Total Q Factor (QTS)1.37
Voice Coil DC Resistance (Re)3.60 Ω
Voice Coil Diameter1 in.
Voice Coil FormerKapton
Voice Coil Inductance @ 1 kHZ (LE)0.35 mH
Voice Coil Winding Depth8.00 mm
Voice Coil Winding TypeCopper
P-A-P10R-8 - 8 Ω versionBasket MaterialPressed Sheet Steel
Cone MaterialPaper
Depth4.8031 in.
Diameter10 in.
Diaphragm Area (SD)330.10 cm2
Dust Dome MaterialFelt
Equivalent Acoustic Volume (VAS)27.40 liters
Flux Density0.96 T
Force Factor (BxL)5.83 Wb/m
Inner Diameter9.0944 in.
Linear Displacement, maximum (XMAX)0.80 mm
Losses Electrical Resistance (RES)102.00 Ω
Magnet Assembly Depth1.9488 in.
Magnet TypeAlnico
Magnetic Gap Depth6.00 mm
Mechanical Compliance (CMS)177.00 µm/N
Mechanical Moving Mass (MMS)15.20 g
Mechanical Q Factor (QMS)14.83
Mounting Hole Bolt Circle Diameter9.6456 in.
Mounting Hole Diameter0.2559 in.
Musical Power50.00 W
Nominal Overall Diameter259.00 mm
Nominal Voice Coil Diameter25.00 mm
Outer Diameter10.1969 in.
Rated Power25.00 W
Reference Efficiency (nO)1.70 %
Resonance Frequency (ƒS)97.00 Hz
Sensitivity @ 1W, 1m94.20 dB
Surround MaterialIntegrated Paper
Surround TreatmentNo
Total Q Factor (QTS)1.62
Voice Coil DC Resistance (Re)6.68 Ω
Voice Coil Diameter1 in.
Voice Coil FormerKapton
Voice Coil Inductance @ 1 kHZ (LE)0.54 mH
Voice Coil Winding Depth8.00 mm
Voice Coil Winding TypeCopper

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

Sound Samples:

PDF: Specification Sheet Specification Sheet223.67 KB
PNG: Terminal Dimensions Terminal Dimensions21.21 KB
Questions? Contact us at [email protected], or give us a call at 480-296-0890

Product Reviews

5.00 out of 5 based on 7 reviews
Christopher Gulotta - October 26th, 2023
5 out of 5

Great speakers I bought them to put into a super reverb amp, it is the second set of them I have purchased from amplified parts for my other super reverb amp.
Great service and fast shipping.
I want to try a set of the p10 r f in another build soon.
The p 10 r are a great sound for your super reverb, bell like chime crystal clear highs even at mid volume levels.

Benny - April 11th, 2023
5 out of 5

I put this in my early 70's Champ...whoa mama! Had to offset it and cut the baffle to get it in the little cab but totally worth it. Great low end response and loud and proud sound. Great speaker, but you all already knew that, right??!

Fred Norman - October 5th, 2021
5 out of 5

It's hard to imagine a speaker making such a difference in the performance of a tube amp. I have a '68 Custom Vibrolux Reverb which, I've been told, began production around 2014. It's a well-made amp, but it didn't really impress me like my original '68 Vibrolux did (CBS-Hybrid). The original stock speakers were Celestion G10R - 30s...very bright and a little shrill-sounding with muddy and over-exaggerated basses. I'm a solo-Jazz Guitarist primarily and wanted a vintage, clean sound so I chose the Jensen Alnico P10R. As you may know, the Vibrolux utilizes 2 - 10" speakers and I had my service tech install them for me yesterday. I could not believe the difference. Clean and smooth highs and mids with tight/clear basses - exactly what I was looking for - with a little extra "punch" to each note! I play an archtop acoustic guitar with a vintage DeArmond #1100 "Rhythm-Chief" pickup. The sound with these Jensen Alnico P10Rs is simply fantastic. Not surprising, since I've read that Jensen was the original amplifier speaker for many companies from the very beginning - including Fender. I'm 100%+ satisfied. Thank you, Amplified Parts and Jensen for making these speakers available for the discriminating musician with a discerning ear for quality...Bravo!

Allen F. Hambrecht - September 15th, 2020
5 out of 5

I used the Jensen speaker from Amplified Parts to replace the speaker in my Fender Super Camp X2.
The upgrade turn out very well with a greatly improved sound!
Thanks,
Allen

RockinRobert - October 10th, 2010
5 out of 5

These speakers came stock in my Super Reverb Reissue. I have never had need to replace them, they provide all the warm clean tones I need, and have that magic sparkle. Driven hard, they crunch nicely, never "farty" on the low end.

Ward - February 10th, 2010
5 out of 5

I agree with Ross - these speakers are a solid replacement. My amp tech recommended that I replace the CTS speakers that were stock in my vintage Super Reverb. I will admit that I was a little hesitant to mess with the original speakers, but the P10R has really livened this amp up. Highly recommended.

Ross - February 8th, 2010
5 out of 5

I have these in my Fender Super and they just sound so sweet, and I was watching the Super and see that Pete Townshend uses the the Fender Vibro King amp that uses these as well, what is good for Pete is good for me!