Speaker - Jensen® Vintage Alnico, 10", P10Q, 40W
The high power 10” Alnico in the Vintage Series, the P10Q was used in a handful of beautifully sounding amps such as the Tweed Super, Brownface Super, and others. This speaks to the fierce tone of the P10Q, capable of great clarity, detailed tone with excellent trebles, and well supported by a solid mid and bass foundation.
Guitarist Description: Warm tone with some bite in the mid frequencies which translates into a fierce response to overdrive distortion.
- Lows: Loose
- Mids: Firm
- Highs: Bright
- Overdrive: Crunchy
For more information about our Jensen® speakers, see our tech corner article on Jensen Speakers.
RoHS Compliant
Impedance | Our Part Number | UPC/EAN | Jensen Part Number |
---|---|---|---|
16 Ω | P-A-P10Q-16 | 8034028641640 | ZJ05120 |
8 Ω | P-A-P10Q-8 | 8034028640155 | ZJ05110 |
Basket Material | Pressed Sheet Steel | ||
Cone Material | Paper | ||
Depth | 5.0196 in. | ||
Diameter | 10 in. | ||
Diaphragm Area (SD) | 8 Ω version | P-A-P10Q-8 | 330.10 cm2 |
16 Ω version | P-A-P10Q-16 | 330.00 cm2 | |
Dust Dome Material | Solid Paper | ||
Equivalent Acoustic Volume (VAS) | 8 Ω version | P-A-P10Q-8 | 24.04 liters |
16 Ω version | P-A-P10Q-16 | 26.60 liters | |
Flux Density | 1.05 T | ||
Force Factor (BxL) | 8 Ω version | P-A-P10Q-8 | 6.07 Wb/m |
16 Ω version | P-A-P10Q-16 | 7.04 Wb/m | |
Inner Diameter | 9.0944 in. | ||
Linear Displacement, maximum (XMAX) | 1.00 mm | ||
Losses Electrical Resistance (RES) | 8 Ω version | P-A-P10Q-8 | 32.90 Ω |
16 Ω version | P-A-P10Q-16 | 42.00 Ω | |
Magnet Assembly Depth | 2.1653 in. | ||
Magnet Type | Alnico | ||
Magnetic Gap Depth | 6.00 mm | ||
Mechanical Compliance (CMS) | 8 Ω version | P-A-P10Q-8 | 159.00 µm/N |
16 Ω version | P-A-P10Q-16 | 174.00 µm/N | |
Mechanical Moving Mass (MMS) | 8 Ω version | P-A-P10Q-8 | 19.70 g |
16 Ω version | P-A-P10Q-16 | 17.20 g | |
Mechanical Q Factor (QMS) | 8 Ω version | P-A-P10Q-8 | 9.96 |
16 Ω version | P-A-P10Q-16 | 8.44 | |
Mounting Hole Bolt Circle Diameter | 9.6456 in. | ||
Mounting Hole Diameter | 0.2559 in. | ||
Musical Power | 80.00 W | ||
Nominal Overall Diameter | 259.00 mm | ||
Nominal Voice Coil Diameter | 32.00 mm | ||
Outer Diameter | 10.1969 in. | ||
Rated Power | 40.00 W | ||
Reference Efficiency (nO) | 8 Ω version | P-A-P10Q-8 | 1.01 % |
16 Ω version | P-A-P10Q-16 | 0.82 % | |
Resonance Frequency (ƒS) | 8 Ω version | P-A-P10Q-8 | 89.90 Hz |
16 Ω version | P-A-P10Q-16 | 91.80 Hz | |
Sensitivity @ 1W, 1m | 8 Ω version | P-A-P10Q-8 | 93.80 dB |
16 Ω version | P-A-P10Q-16 | 92.40 dB | |
Surround Material | Integrated Paper | ||
Surround Treatment | No | ||
Total Q Factor (QTS) | 8 Ω version | P-A-P10Q-8 | 1.44 |
16 Ω version | P-A-P10Q-16 | 1.88 | |
Voice Coil DC Resistance (Re) | 8 Ω version | P-A-P10Q-8 | 5.57 Ω |
16 Ω version | P-A-P10Q-16 | 12.03 Ω | |
Voice Coil Diameter | 1.25 in. | ||
Voice Coil Former | Nomex | ||
Voice Coil Inductance @ 1 kHZ (LE) | 8 Ω version | P-A-P10Q-8 | 0.52 mH |
16 Ω version | P-A-P10Q-16 | 0.79 mH | |
Voice Coil Winding Depth | 8.00 mm | ||
Voice Coil Winding Type | Copper |
Packaging Dimensions | 11.811 in. × 12.2047 in. × 6.6929 in. | |
Weight (Packaging) | 4.45 lbs. |
P-A-P10Q-16 - 16 Ω version | Basket Material | Pressed Sheet Steel |
Cone Material | Paper | |
Depth | 5.0196 in. | |
Diameter | 10 in. | |
Diaphragm Area (SD) | 330.00 cm2 | |
Dust Dome Material | Solid Paper | |
Equivalent Acoustic Volume (VAS) | 26.60 liters | |
Flux Density | 1.05 T | |
Force Factor (BxL) | 7.04 Wb/m | |
Inner Diameter | 9.0944 in. | |
Linear Displacement, maximum (XMAX) | 1.00 mm | |
Losses Electrical Resistance (RES) | 42.00 Ω | |
Magnet Assembly Depth | 2.1653 in. | |
Magnet Type | Alnico | |
Magnetic Gap Depth | 6.00 mm | |
Mechanical Compliance (CMS) | 174.00 µm/N | |
Mechanical Moving Mass (MMS) | 17.20 g | |
Mechanical Q Factor (QMS) | 8.44 | |
Mounting Hole Bolt Circle Diameter | 9.6456 in. | |
Mounting Hole Diameter | 0.2559 in. | |
Musical Power | 80.00 W | |
Nominal Overall Diameter | 259.00 mm | |
Nominal Voice Coil Diameter | 32.00 mm | |
Outer Diameter | 10.1969 in. | |
Rated Power | 40.00 W | |
Reference Efficiency (nO) | 0.82 % | |
Resonance Frequency (ƒS) | 91.80 Hz | |
Sensitivity @ 1W, 1m | 92.40 dB | |
Surround Material | Integrated Paper | |
Surround Treatment | No | |
Total Q Factor (QTS) | 1.88 | |
Voice Coil DC Resistance (Re) | 12.03 Ω | |
Voice Coil Diameter | 1.25 in. | |
Voice Coil Former | Nomex | |
Voice Coil Inductance @ 1 kHZ (LE) | 0.79 mH | |
Voice Coil Winding Depth | 8.00 mm | |
Voice Coil Winding Type | Copper | |
P-A-P10Q-8 - 8 Ω version | Basket Material | Pressed Sheet Steel |
Cone Material | Paper | |
Depth | 5.0196 in. | |
Diameter | 10 in. | |
Diaphragm Area (SD) | 330.10 cm2 | |
Dust Dome Material | Solid Paper | |
Equivalent Acoustic Volume (VAS) | 24.04 liters | |
Flux Density | 1.05 T | |
Force Factor (BxL) | 6.07 Wb/m | |
Inner Diameter | 9.0944 in. | |
Linear Displacement, maximum (XMAX) | 1.00 mm | |
Losses Electrical Resistance (RES) | 32.90 Ω | |
Magnet Assembly Depth | 2.1653 in. | |
Magnet Type | Alnico | |
Magnetic Gap Depth | 6.00 mm | |
Mechanical Compliance (CMS) | 159.00 µm/N | |
Mechanical Moving Mass (MMS) | 19.70 g | |
Mechanical Q Factor (QMS) | 9.96 | |
Mounting Hole Bolt Circle Diameter | 9.6456 in. | |
Mounting Hole Diameter | 0.2559 in. | |
Musical Power | 80.00 W | |
Nominal Overall Diameter | 259.00 mm | |
Nominal Voice Coil Diameter | 32.00 mm | |
Outer Diameter | 10.1969 in. | |
Rated Power | 40.00 W | |
Reference Efficiency (nO) | 1.01 % | |
Resonance Frequency (ƒS) | 89.90 Hz | |
Sensitivity @ 1W, 1m | 93.80 dB | |
Surround Material | Integrated Paper | |
Surround Treatment | No | |
Total Q Factor (QTS) | 1.44 | |
Voice Coil DC Resistance (Re) | 5.57 Ω | |
Voice Coil Diameter | 1.25 in. | |
Voice Coil Former | Nomex | |
Voice Coil Inductance @ 1 kHZ (LE) | 0.52 mH | |
Voice Coil Winding Depth | 8.00 mm | |
Voice Coil Winding Type | Copper |
![]() | All Models |
![]() | All Models |
![]() | All Models |
![]() | All Models |
![]() | All Models |
![]() | All Models |
![]() | All Models |
![]() | All Models |
![]() | All Models |
My Project Lists
Specifications, Files, and Documents
Sound Samples:
Blues Sound Sample00:49https://www.amplifiedparts.com/sites/default/files/associated_files/p10q_blues.mp3
Clean Sound Sample00:16https://www.amplifiedparts.com/sites/default/files/associated_files/p10q_clean.mp3
Country Sound Sample00:35https://www.amplifiedparts.com/sites/default/files/associated_files/p10q_country.mp3
Jazz Sound Sample00:43https://www.amplifiedparts.com/sites/default/files/associated_files/p10q_jazz.mp3
Metal Sound Sample00:55https://www.amplifiedparts.com/sites/default/files/associated_files/p10q_metal.mp3
Overdriven Sound Sample00:15https://www.amplifiedparts.com/sites/default/files/associated_files/p10q_overdriven.mp3
Rock Sound Sample00:41https://www.amplifiedparts.com/sites/default/files/associated_files/p10q_rock.mp3
Update Required To play the media you will need to either update your browser to a recent version or update your Flash plugin.
Questions and Answers
Click each question to see its answers.
2 answers
Hi I need 4 recone kits, 15/16 in. inside diameter of voice coil. height is 7/8 in, copper winding is between 1/4-5/16in.high.
Asked by Anonymous on February 23rd, 2018.
Unfortunately Jensen does not offer any recone kits on their speakers.
Weber speakers can recone them for you.just had my 1961 p10qs reconed there.came from fender 4x10 brown fender amp
Product Reviews
I use four of these with my Marshall head and it is sweet!