Speaker - Jensen® Jets, 10", Blackbird, 100W

Speaker - Jensen® Jets, 10", Blackbird, 100W image 1
Speaker - Jensen® Jets, 10", Blackbird, 100W image 2
Speaker - Jensen® Jets, 10", Blackbird, 100W image 3
Speaker - Jensen® Jets, 10", Blackbird, 100W image 4
Click to zoom in
Speaker - Jensen® Jets, 10", Blackbird, 100W image 1Speaker - Jensen® Jets, 10", Blackbird, 100W image 2Speaker - Jensen® Jets, 10", Blackbird, 100W image 3Speaker - Jensen® Jets, 10", Blackbird, 100W image 4
Customer Images:
No Images yet! Submit a product image below!

Speaker - Jensen® Jets, 10", Blackbird, 100W

In Stock
Free Shipping within continental U.S.

The Blackbird 10 offers the same power handling of its 12” sibling and proves to have the same tonal approach. Its exceptional detail and treble resolution, and powerful basses make the Blackbird 10 an excellent choice for the more discerning players looking for the unique sonic signature of 2x10 and 4x10 configuration and high-end super compact 1x10 combo amps.

Guitarist Description: Fat low end response topped with sparkling highs. It exhibits a bright, dirty grit when presented with overdrive distortion.

  • Lows: Fat
  • Mids: Aggressive
  • Highs: Bright
  • Overdrive: Edgy/Crunchy

For more information about our Jensen® speakers, see our tech corner article on Jensen Speakers.

Item ID:
JensenJensen Jets
Magnet Type:
RoHS Compliant
Part Numbers
ImpedanceOur Part NumberUPC/EANJensen Part Number
16 ΩP-A-JP10-100B168034028640254 ZJ05402
Product Measurements by Type
Basket MaterialPressed Sheet Steel
Cone MaterialPaper
Depth5.3543 in.
Diameter10 in.
Diaphragm Area (SD)330.00 cm2
Dust Dome MaterialNon-treated Cloth
Equivalent Acoustic Volume (VAS)16.53 liters
Flux Density1.00 T
Force Factor (BxL)13.53 Wb/m
Inner Diameter9.0944 in.
Linear Displacement, maximum (XMAX)1.00 mm
Losses Electrical Resistance (RES)195.20 Ω
Magnet Assembly Depth2.6968 in.
Magnet TypeAlnico
Magnetic Gap Depth8.00 mm
Mechanical Compliance (CMS)106.00 µm/N
Mechanical Moving Mass (MMS)20.90 g
Mechanical Q Factor (QMS)15.00
Mounting Hole Bolt Circle Diameter9.6456 in.
Mounting Hole Diameter0.2559 in.
Musical Power200.00 W
Nominal Overall Diameter259.00 mm
Nominal Voice Coil Diameter50.00 mm
Outer Diameter10.1969 in.
Rated Power100.00 W
Reference Efficiency (nO)2.15 %
Resonance Frequency (ƒS)107.10 Hz
Sensitivity @ 1W, 1m96.90 dB
Surround MaterialIntegrated Paper
Surround TreatmentYes
Total Q Factor (QTS)0.84
Voice Coil DC Resistance (Re)11.61 Ω
Voice Coil Diameter2 in.
Voice Coil FormerKapton
Voice Coil Inductance @ 1 kHZ (LE)1.00 mH
Voice Coil Winding Depth10.00 mm
Voice Coil Winding TypeAluminum
Packaging Information
Packaging Dimensions11.0236 in. × 11.0236 in. × 7.0866 in.
Weight (Packaging)8.35 lbs.

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

Sound Samples:

PDF: Specification Sheet Specification Sheet189.16 KB
PNG: Terminal Dimensions Terminal Dimensions21.21 KB

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on May 12th, 2021.
May 12th, 2021
Staff Member
The amp would ideally have an 8 Ohm load from the speakers, and there is no way to get an 8 Ohm load from two 8 Ohm speakers. You would ideally want to use two 16 Ohm speakers wired in parallel in a 2x10 cab.
May 14th, 2021
Thank You!!!

Product Reviews

5.00 out of 5 based on 1 reviews
- July 28th, 2021
5 out of 5

At this point, I have only tested the speaker before installing it in a cabinet. It sounds great just sitting in the cardboard box it came in. I ordered two of the speakers during a sales promotion from Amplified Parts. One of them was defective from the factory. Amplified Parts replaced the damage one with no hassle. Very good people to work with and I plan to shop with them in the future. I've never owned Alnico speakers and I'm looking forward to discovering new tones. FYI-this was the 16 ohm speaker.