Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
Speaker - Eminence® Patriot, 10", Ragin Cajun, 75W
Lead/rhythm guitar 10" American speaker, 8 ohm. Very loud, touch sensitive and responsive with nice bell sounding top end and a little bite
RoHS Compliant
| Baffle Hole Diameter | 9.13 in. | |
| Basket Material | Pressed Sheet Steel | |
| Coil Construction | copper voice coil | |
| Coil Former | Polyimide former | |
| Coil Inductance (le) | 0.38 mH | |
| Cone Composition | Paper cone | |
| Cone Edge Composition | Paper cone edge | |
| Core Details | Non-vented core | |
| D.C. Resistance (Re) | 7.01 Ω | |
| Depth | 3.8 in. | |
| Diameter | 10 in. | |
| Driver Volume Displaced | 1.1 liters | |
| Dust Cap Composition | Zurette dust cap | |
| Efficiency Bandwidth Product (ebp) | 156 | |
| Electrical Q Factor (Qes) | 0.54 | |
| Equivalent Acoustic Volume (VAS) | 34.1 liters | |
| Force Factor (BxL) | 11.8 Wb/m | |
| Front Sealing Gasket | Yes | |
| Gap Height | 7.9 mm | |
| Linear Displacement, maximum (XMAX) | 0.48 mm | |
| Magnet Composition | Ferrite | |
| Magnet Weight | 30 oz. | |
| Mechanical Compliance (CMS) | 0.18 mm/N | |
| Mechanical Moving Mass (MMS) | 20 g | |
| Mechanical Q Factor (QMS) | 11.42 | |
| Mounting Hole Bolt Circle Diameter | 243.8 mm | |
| Mounting Hole Diameter | 5.8mm | |
| Nominal Basket Diameter | 10 in. | |
| Nominal Impedance | 8 Ω | |
| Overall Diameter | 256.8 mm | |
| Peak Diaphragm Displacement Volume (vd) | 17.6 cm3 | |
| Power Rating | 75 W | |
| Rear Sealing Gasket | Yes | |
| Recommended Enclosure Volume, sealed | Acceptable | |
| Recommended Enclosure Volume, vented | Acceptable | |
| Resonance | 84 Hz | |
| Resonance Frequency (ƒS) | 84 Hz | |
| Sensitivity | 100.5 dB | |
| Surface Area Of Cone (sd) | 366.1 cm2 | |
| Total Q Factor (QTS) | 0.51 | |
| Usable Frequency Range | 80 Hz - 5 kHz | |
| Voice Coil Diameter | 1.5 in. |
| Packaging Dimensions | 13.75 in. × 13.75 in. × 6.125 in. | |
| Weight (Packaging) | 8.2 lbs. |
 Specification Sheet | All Models |
 Sound Sample - Blues lead | All Models |
| Sound Sample - Clean riff 1 | All Models |
| Sound Sample - Clean riff 2 | All Models |
| Sound Sample - Country riff 1 | All Models |
| Sound Sample - Country riff 2 | All Models |
| Sound Sample - Country riff 3 | All Models |
| Sound Sample - Funky overdrive | All Models |
| Sound Sample - Funky rhythm | All Models |
| Sound Sample - Jazz chord melody | All Models |
| Sound Sample - Jazz with lead | All Models |
| Sound Sample - Jazzy rhythm | All Models |
| Sound Sample - Overdriven lead | All Models |
| Sound Sample - Pop rhythm | All Models |
| Sound Sample - Rhythm overdrive | All Models |
| Sound Sample - Tele riff | All Models |
| Sound Sample - Twinkle Little Star | All Models |
My Project Lists
Specifications, Files, and Documents
Sound Samples:
Sound Sample - Blues lead01:15https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_blues_lead.mp3
Sound Sample - Clean riff 100:27https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_clean_riff_1.mp3
Sound Sample - Clean riff 201:14https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_clean_riff_2.mp3
Sound Sample - Country riff 100:20https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_country_riff_1.mp3
Sound Sample - Country riff 200:30https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_country_riff_2.mp3
Sound Sample - Country riff 300:22https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_country_riff_3.mp3
Sound Sample - Funky overdrive00:47https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_funky_overdrive.mp3
Sound Sample - Funky rhythm00:11https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_funky_rhythm.mp3
Sound Sample - Jazz chord melody00:14https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_jazz_chord_melody.mp3
Sound Sample - Jazz with lead00:20https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_jazz_with_lead.mp3
Sound Sample - Jazzy rhythm00:14https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_jazzy_rhythm.mp3
Sound Sample - Overdriven lead00:59https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_overdriven_lead.mp3
Sound Sample - Pop rhythm00:24https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_pop_rhythm.mp3
Sound Sample - Rhythm overdrive01:21https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_rhythm_overdrive.mp3
Sound Sample - Tele riff00:04https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_tele_riff.mp3
Sound Sample - Twinkle Little Star00:15https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-ragincajun-8-sound_sample_twingle_little_star.mp3
Update Required To play the media you will need to either update your browser to a recent version or update your Flash plugin.
Questions and Answers
Click each question to see its answers.
1 answers
I heard this is a good replacement for my stock speaker in my Princeton Reverb blackface. Do you recommend the 75 watt or 50 watt speaker for the Princeton?
Asked by Anonymous on December 2nd, 2016.
To our knowledge this speaker only comes in a 75 watt version.
1 answers
Hello, I own a Fender Blues Deluxe Reissue amp with a power output of 40W into 8 ohms or 4 ohms at 5% THD; it is connected to one 12 inch 8 ohm Fender speaker.I have two extra "Ragin Cajun"10 inch 8 ohm speakers (not being used) rated at 75 watts each which I am considering installing instead of the existing 12 inch.
Modifying the enclosure to accept the two 10 inchers is not a problem. My question is: What`s the proper way to connect (wire) these speakers (if feasable) to the amp. This amp also has an External Speaker output jack. Thank you.
Boris
Asked by Anonymous on December 22nd, 2016.
You would have to run the two speakers at either 16 ohms or 4 ohms depending on whether you wire them in series or parallel. Parallel wiring will give you 4 ohms.
Customers who purchased this item also bought
Related Products
Product Reviews