Luthier Parts & Tools

P-GTNN04-FLAT Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
P-GTNN07 Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
P-GTNN08 Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
P-GTNN05 Nut - Brass, for Fender, blank un-slotted
This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.
  • Thickness = 9/64 inches (3.47mm)
  • Flat Bottom Length = 1 11/16 inches (43 mm)
  • Height at ends = 13/64 inches (5.25mm)
  • Height at middle = 15/64 inches (6mm)
$6.50
P-GTNN02 Nut blanks - Fender®, melamine, set of 2
Set of two Fender® high-quality melamine (simulated bone) string nuts with 9.5" radius, for use with most Fender instruments
$5.55
package of 2
P-GTNN06 Nut - Graphite, for Fender, blank unslotted
This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)
$4.55
P-GNUT-TUSQ-ABLNK-1 Nut - Tusq , Pre-shaped Blank, Acoustic, Martin Style
The PQ-M100-00 is a TUSQ nut blank specially designed to be used on Martin style guitars. It has an angled bottom and needs to be slotted. Dimensions:
  • Length - 1.89 in. (48.01mm)
  • Width - 0.226 in. (5.74mm)
  • Height - 0.42 in. (10.67mm)
$12.75
Don't see what you're looking for? Send us your product suggestions!