Semiconductors

P-QMJ15016 Transistor - MJ15016, PNP, Complementary High-Power
Transistor MJ15016, TO-3 Case, PNP
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V
$2.85
P-QMJ15022 Transistor - MJ15022, NPN, Power Transistor
Transistor MJ15022, TO-3 Case, NPN PowerBase power transistors designed for high power audio, disk head positioners and other linear applications. Features
  • High Safe Operating Area (100% Tested) −2 A @ 80 V
  • High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc
$7.50
P-QMJ15023 Transistor - MJ15023, PNP, Power Transistor
Transistor MJ15023, TO-3 Case, PNP
PowerBase power transistors designed for high power audio, disk head positioners and other linear applications.
Features
  • High Safe Operating Area (100% Tested) −2 A @ 80 V
  • High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc
$6.00
P-QMJ15025 Transistor - MJ15025, TO-3 Case
Transistor MJ15025, TO-3 Case
The MJ15025 is a power transistor designed for high-power audio, disk head positioners, and other linear applications
Features:
  • High Safe Operating Area: -2A @ 80 V
  • High DC Current Gain hFE = 15 (Min) @ IC = 8 Adc
$4.75
P-QMJ15032 Transistor - Peavey, MJE15032, Complementary Silicon Power
MJE 15032, Complimenary silicon power, TO-220AB Case. Designed for use as high−frequency drivers in audio amplifiers
$3.25
P-QMPS6531 Transistor - Peavey, MPS 6531, NPN Amplifier, 40V, TO-92
MPS 6531, NPN general purpose amp, 40V, TO-92 Case.
$2.00
P-QMPS6533 Transistor - Peavey, MPS 6533, PNP Amplifier, 40V, TO-92
MPS 6533, PNP general purpose amp, 40V, TO-92 Case.
$2.00
P-QMPSA13 Transistor - MPSA13, Darlington 500mA 30V NPN
NPN Darlington transistor (TO-92 package) - designed for applications requiring extremely high current gain at collector currents to 1.0A.
  • Max collector to emitter voltage = 30 V
  • Max collector to base voltage = 30 V
  • Max emitter to base voltage = 10 V
  • Max collector current = 1.2 A (continuous)
$0.30
P-QNE5532 Integrated Circuit - NE5532, Low-Noise Dual Op-Amp
This a high performance dual low noise operational amplifier. Compared to the standard dual operational amplifiers, such as the NJM1458, it shows better noise performance, improved output drive capability, and considerably higher small-signal and power bandwidths. it is compensated internally for voltage follower circuit. This makes the device especially suitable for application in high quality and professional audio equipment, instrumentation, control circuits, and telephone channel amplifiers
Features:
  • Operating Voltage = ±3V~±22V
  • Small Signal Bandwidth = 10MHz typ.
  • Output Drive Capability = 600Ω,10Vrms typ.
  • Input Noise Voltage = 5nV/√Hz typ.
  • Power Bandwidth = 140kHz typ.
  • Slew Rate = 8V/µs typ.
  • Bipolar Technology
$1.15
P-QOPAMPDD Op-Amp - Orange, Dual Discrete
The Dual Discrete op-amp is specially designed for audio and is among the most musical sounding dual discrete op-amps out there. It is available in DIP 8 format and can be used in any CD player, DAC, or preamplifier that currently runs DIP 8 based IC dual op-amp types.
The overall soundstage and transient detail will be greatly improved when used in pretty much all audio equipment that it can physically be fitted to. It has a very low noise Jfet front end so it can run with input impedances above 1M Ohms if needed. It can replace the following, provided the equipment it’s being used in has 22mm of height clearance and 5mm side clearance (per side).
  • OPA2604
  • OPA2134
  • TL072
  • NE5532
  • LM4562
  • OP275
  • OP285

Please check that the PSU can supply the extra current needed, especially if replacing more than one existing IC op-amp with our op-amp as with all discrete types, they do draw more current.
$55.00
P-QPC1188H Integrated Circuit - Fender®, Power Amp PC1188H
PC 1188H Power Amp - Fender The PC1188H is a monolithic integrated circuit and a power amplifier designed for Hi-Fi audio sets. The PC1188H can provide 20W (typical) to 8 ohms at 1% T.H.D. and +/- 22V supply voltage. Features:
  • High output power
  • Low distortion
  • Wide frequency bandwidth
  • A muting function which eliminates pop on noise and the thermal and the over current protection circuit
$9.50
P-QPF5102 Transistor - JFET N-Ch Transistor Lo Freq / Lo Noise, PF5102
PF5102 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
  • Max drain to gate voltage = 40 V
  • Max gate to source voltage = -40 V
  • Max forward gate current = 50 m
$0.75
On Backorder
P-QQ4025P Triac - Q6025P5 - Alternistor, 400V, 25A, Fastpack TO-3 Base
Alternistors are specifically designed for applications which are required to switch highly inductive loads. To accomplish this, a special chip has been designed which effectively offers the same performance as two thyristors (SCRs) wired inverse parallel (back to back); hence the alternistor has better turn-off behavior than a standard triac.
$14.95
P-QSBS14 Diode Thyristor - Peavey, SBS 14 Bidirectional, 8V, TO-92 Case
Designed for full-wave triggering in Triac phase control circuits, half-wave SCR triggering application and as voltage level detectors. Used in most Peavey linear power amplifier designs through 2000 including CS/M/DECA series power amps, IPA300, and all models using 402/602/304S/204S power modules.
  • Low Switching Voltage — 8 Volts Typical
  • Uniform Characteristics in Each Direction
  • Low On-State Voltage — 1.7 Volts Maximum
  • Low Off-State Current — 0.1 mA Maximum
$1.50
P-QSDS7204 Transistor - Peavey, SDS 7204, 300V, 10MA
SDS 7204, 300V, 10 mA, Case-30.
$1.45
P-QSJ73180 Transistor - Peavey, PNP 180V Output, SJ-73180, 180V, 3A
SJ-73180 (MJ21193), PNP output, 180V, 3A, TO-3 Case.
$7.95
P-QSJ74200 Transistor - Peavey, PNP 200V Output, SJ-74200, 200V, 4A
SJ-74200, PNP output, 200V, 4A, TO-3 Case.
$10.95
On Backorder
P-QSJ81180 Transistor - Peavey, NPN 140V Driver, SJ-81180, 180V, 1A
SJ-81180, NPN driver, 180V, 1A, TO-3 Case.
$8.25
P-QSJE2153 Transistor - Peavey, PNP Darlington, SJE 2153, 80V, 3A
SJE 2153 (TIP107), PNP Darlington, 80V, 3A, TO-3 Case.
$1.95
P-QSJE5331 Transistor - Peavey, SJE 5331, 120V, 3A
SJE 5331, 120V, 3A, Case-77.
$1.50
P-QSJE5332 Transistor - Peavey, SJE 5332, 120V, 3A
SJE 5332, 120V, 3A, Case-77.
$1.65
P-QTDA7293 Integrated Circuit - Marshall, TDA7293 amplifier
120V - 100W DMOS audio amplifier with mute/standby. The TDA7293 is a monolithic integrated circuit in Multiwatt15 package, intended for use as audio class AB amplifier in Hi-Fi field applications, such as home stereo, self powered loudspeakers and Topclass TV. Thanks to the wide voltage range and to the high output current capability it is able to supply the highest power into both 4-Ω and 8-Ω loads.
$11.95
P-QTIP41C Transistor - TIP41C, NPN Epitaxial Transistor
Transistor TIP41C, TO-220 Case.
NPN Epitaxial Silicon Transistor
Complementary to TIP42 (P-QTIP42C)
Max ratings:
  • Collector-Base voltage = 100V
  • Collector-Emitter Voltage = 100V
  • Emitter-Base Voltage = 5V
  • Collector current (DC) = 6A
  • Collector current (Pulse) = 10A
  • Base current = 2A
$0.80
P-QTIP42C Transistor - TIP42C, PNP Epitaxial Transistor
Transistor TIP42C, TO-220 Case.
PNP Epitaxial Silicon Transistor
Complementary to TIP41 (P-QTIP41C)
Max ratings:
  • Collector-Base voltage = -100V
  • Collector-Emitter Voltage = -100V
  • Emitter-Base Voltage = -5V
  • Collector current (DC) = -6A
  • Collector current (Pulse) = -10A
  • Base current = -2A
$0.80
Don't see what you're looking for? Send us your product suggestions!