Semiconductors

P-QTL062 Op-Amp - TL062, Dual, Low-Power, JFET Input, 8-Pin DIP
Dual low power opamps in an 8-pin DIP package. The TL062 offers a high input impedance and 1MHz bandwidth.
$0.28
P-QTL072 Op-Amp - TL072, Dual, Low-Noise, JFET Input, 8-Pin DIP
The TL072is a high speed JFET input dual operational amplifier incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.
$0.70
P-QTL074 Op-Amp - TL074, Quad, Low-Noise, JFET Input, 14-Pin DIP
Low noise JFET quad operational amplifier. Incorporates well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. Features high slew rates, low input bias and offset currents, and low offset voltage temperature coefficients. Features:
  • Wide common-mode and differential voltage range
  • Low input bias and offset current
  • Low noise en = 15 nV/HZ
  • Output short-circuit protection
  • High input impedance JFET input stage
  • Low harmonic distortion: 0.01%
  • Internal frequency compensation
  • Latch up free operation
  • High slew rate: 16 V/us (typical)
$1.15
P-QTL082 Op-Amp - TL082, Dual, Wide-Bandwidth, JFET Input, 8-Pin DIP
Dual wide-bandwidth TL082 opamps in an 8-pin DIP package. The TL082 offers a high input impedance and 4MHz bandwidth.
$0.21
R-VTL5C1-P Optocoupler - Vactec, VTL5C1, Vactrol, New Old Stock
New old stock Vactec VTL5C1 vactrols from Perkin Elmer Optoelectronics. These premium vactrols are a great choice for use in phasers, compressors, tremolos, and synth modules such as low-pass gates. They are also used in switching circuits in amplifiers. Limited quantities are available.
$10.95
R-VTL5C1 Optocoupler - VTL5C1, Vactrol, for Channel Switching
VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
$7.95
P-QBR-34 Rectifier - Single-phase Bridge, 3A 400V
A full wave rectifier with 4 elements in a bridge circuit so that DC voltage is obtained from one pair of junctions when an AC voltage is applied to another pair of junctions.
$0.95
P-QMC78L05 Regulator - 5 Volt, used in MOD® Pedal Kits
5V Linear Regulator. Used in MOD® kits. This fixed-voltage monolithic integrated circuit voltage regulator is suitable for applications that required supply current up to 100 mA.
$1.25
R-VOP1020 Switch - Vibrato LDR, for Fender® Amps
Optocoupler. Vibrato LDR for Fender Amps. Fix the dead LDR-style tremolo on your vintage Fender amps as well as others.
  • Non-polarized optical side is indicated by silver dot and slightly longer leads
  • Resistive side is indicated only by slightly shorter leads
$8.95
P-Q2N3055 Transistor - 2N3055, High Power NPN Silicon, TO-3 Case
15 A, 60 V, 115 W
EPIBASE - Designed for power amplifier and switching regulator applications. The best choice where high frequency response, low switching losses and good safe operating area are required.
  • Current Gain - Bandwidth Product - fT = 2.5 MHz (Min) @ Ic = 1.0 Adc
  • Safe Operating Area - Full Power Rating to 40 V
$2.25
P-Q2N5088 Transistor - 2N5088, Bipolar, General Purpose
2N5088 NPN Bipolar Junction Transistor in TO-92 package
$0.20
P-QA18937 Transistor - Fender®, A1837, amplifier application
A1837 Transistor - Fender. Power amplifier applications and Driver Stage Amplifier Applications.
$3.95
P-QPF5102 Transistor - JFET N-Ch Transistor Lo Freq / Lo Noise, PF5102
PF5102 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
  • Max drain to gate voltage = 40 V
  • Max gate to source voltage = -40 V
  • Max forward gate current = 50 m
$0.75
P-QMJ15015 Transistor - MJ15015, NPN, Complementary High-Power
Transistor MJ15015, TO-3 Case, NPN
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V
$2.85
P-QMJ15016 Transistor - MJ15016, PNP, Complementary High-Power
Transistor MJ15016, TO-3 Case, PNP
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V
$2.85
P-QMJ15022 Transistor - MJ15022, NPN, Power Transistor
Transistor MJ15022, TO-3 Case, NPN PowerBase power transistors designed for high power audio, disk head positioners and other linear applications. Features
  • High Safe Operating Area (100% Tested) −2 A @ 80 V
  • High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc
$7.50
P-QMJ15023 Transistor - MJ15023, PNP, Power Transistor
Transistor MJ15023, TO-3 Case, PNP
PowerBase power transistors designed for high power audio, disk head positioners and other linear applications.
Features
  • High Safe Operating Area (100% Tested) −2 A @ 80 V
  • High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc
$6.00
P-QMJ15025 Transistor - MJ15025, TO-3 Case
Transistor MJ15025, TO-3 Case
The MJ15025 is a power transistor designed for high-power audio, disk head positioners, and other linear applications
Features:
  • High Safe Operating Area: -2A @ 80 V
  • High DC Current Gain hFE = 15 (Min) @ IC = 8 Adc
$4.75
P-QBS170 Transistor - Mosfet BS170, Small Signal
MOSFET BS170 N-Channel Transistor. Used in MOD® Kits.
Note - this is a fragile component! Use caution not to overheat or break leads.
$1.25
P-QMPSA13 Transistor - MPSA13, Darlington 500mA 30V NPN
NPN Darlington transistor (TO-92 package) - designed for applications requiring extremely high current gain at collector currents to 1.0A.
  • Max collector to emitter voltage = 30 V
  • Max collector to base voltage = 30 V
  • Max emitter to base voltage = 10 V
  • Max collector current = 1.2 A (continuous)
$0.30
P-Q2N5400 Transistor - Peavey, 2N5400, PNP Amp, 120V, 20MA, TO-92
2N5400 (761), PNP general purpose amp, 120V, 10mA, TO-92 case.
$0.45
P-QMJ15032 Transistor - Peavey, MJE15032, Complementary Silicon Power
MJE 15032, Complimenary silicon power, TO-220AB Case. Designed for use as high−frequency drivers in audio amplifiers
$3.25
P-QMPS6531 Transistor - Peavey, MPS 6531, NPN Amplifier, 40V, TO-92
MPS 6531, NPN general purpose amp, 40V, TO-92 Case.
$2.00
P-QMPS6533 Transistor - Peavey, MPS 6533, PNP Amplifier, 40V, TO-92
MPS 6533, PNP general purpose amp, 40V, TO-92 Case.
$2.00
Don't see what you're looking for? Send us your product suggestions!