1. Home
  2. Products
  3. Reverb Tanks

Reverb Tanks

Spring reverb tanks are used to create a unique reverberation effect in guitar amps and organs. The reverberation effect is created when an audio signal created by a transducer is sent through one or more springs, the movement of the springs is then converted back into an audio signal by another transducer at the other end, creating the unique sound. Not sure which tank you're looking for or what a 4AB3C1B is? Check out our spring reverb calculator to help you determine what these tank designations mean!
products per page
S-H273X Cable - RCA, Shielded Right Angle Plugs
Right angle RCA cables for Reverb Tanks and other electronic devices.
Starting at $3.50
S-H281 Connector - Accutronics, extra for reverb tanks
Package of 2
Connector - for Accutronics Blue reverb tanks P-RAMC2BF2 and P-RAMC2BF3. One green and one red per item.
$1.20
P-R-ABE DSP Module - ABE, Accu-Bell Effector, 3 Adjustable Effects
The Accu-Bell Effector offers reverb, chorus, and delay with adjustable setting and tap tempo. This module runs on 5.5V to 9.5V DC so it is easy to incorporate into effect pedal builds. Please see the attached datasheet for an example schematic.
$21.95
P-RBTSE-99FX DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
$32.00
P-G001 Grommet - Rubber, for Reverb Tank vibration
Package of 4
Mount these rubber grommets to the base of reverb tanks to help alleviate feedback and other vibration issues. The thick rubber ring helps with isolating the tank from the surface that it is mounted to or resting upon. These rubber grommets fit typical reverbs tanks. Mounting Hole Diameter = 3/8" Outer Diameter = 1/2". Package of 4.
$1.30
P-RKBTSE-16FX Multi Processor Module - Belton, BTSE-16FX
The BTSE-16FX Effect board provides 16 different digital audio effects to be used for mixers or other audio applications that require sound enhancement. Equipped with the superb quality digital effects processing engine which it adds that extra punch needed to make audio presentations truly stand out.
$29.95
S-H279 Reverb Cable Kit - Vintage style RCA, 3 ft and 5 ft
Package of 2
Fully Assembled version: Package includes two vintage style RCA cables: One 3 foot and one 5 foot.
DIY Kit: Assembly required. Kit comes with one 3 ft. and one 5 ft. length of insulated braided wire and 4 RCA plugs. Solder RCA plugs onto the ends of the wires by stripping 3/8" of the white insulation from wire. Insert wire into tip. Solder in place. Next, solder braided shielding to sleeve of the plug.
Starting at $13.95
P-RBTDR-3H Reverb Module - Accutronics Belton, Digi-Log, Adjustable Decay
A great digital reverb sound that easily replaces a spring reverberation unit. Stereo outputs may be summed for mono operation. Simple interface: input, output, +5V, and ground
$15.95
P-RBTDR-1H-X Reverb Module - Accutronics Belton, Digi-Log, horizontal mount
A great digital reverb sound that easily replaces a spring reverberation unit. Simple interface requires only input, output, +5V, and ground. Output requires no external capacitors.
Starting at $12.95
P-RBTDR-2H-X Reverb Module - Accutronics Belton, Digi-Log, horizontal, mini
A great digital reverb sound that easily replaces a spring reverberation unit. Small package is half the size of the P-RBTDR-1H-X
$14.95
P-RBTDR-2V-X Reverb Module - Accutronics, Digi-Log, vertical mount, mini
A great digital reverb sound that easily replaces a spring reverberation unit. Stereo outputs may be summed for mono operation. Simple interface requires only input, output, +5V, and ground.
$14.95
P-RK-1AB2B1B Reverb Tank - Accutronics, 1AB2B1B, Medium Decay, 2-Spring
Short (2 Spring) tank, medium decay, 8Ω in / 2,250Ω out. Input grounded/output insulated connectors. Horizontal/open side down mounting.
$22.95
P-RK-1BB2D1B Reverb Tank - Accutronics, 1BB2D1B, Medium Decay, 2-Spring
Short (2 Spring) tank, medium decay, 150Ω in / 2,250Ω out. Input insulated/output insulated connectors. Horizontal/open side down mounting. A small low cost two spring unit designed for application when price is a major factor. Ideally suited for practice amps.
$22.95
P-RK-4AB3C1A Reverb Tank - Accutronics, 4AB3C1A, Long Decay, 2-Spring
Long (2 Spring) tank, long decay, 8Ω in / 2,250Ω out. Input insulated/output grounded connectors. Horizontal/open side up mounting.
$23.95
P-RK-4AB3C1B Reverb Tank - Accutronics, 4AB3C1B, Long Decay, 2-Spring
Long (2 Spring) tank, long decay, 8Ω in / 2,250Ω out. Input insulated/output grounded connectors. Horizontal/open side down mounting. Counter wound and coupled springs deliver superior mechanical performance and classic sound.
$24.95
P-RK-4AB3C1C Reverb Tank - Accutronics, 4AB3C1C, Long Decay, 2-Spring
Long (2 Spring) tank, long decay, 8Ω in / 2,250Ω out. Input insulated/output grounded connectors. Vertical/connectors up mounting. Compatible amps include Fender® stand alone reverb and original ’63 Reverb. Also used in Marshall™, and Ampeg™ amps.
$23.95
P-RK-4BB2C1B Reverb Tank - Accutronics, 4BB2C1B, Medium Decay, 2-Spring
Long (2 Spring) tank, medium decay, 150Ω in / 2,250Ω out. Input insulated/output grounded connectors. Horizontal/open side down mounting. Compatible amps include some Crate™ models.
$24.95
P-RK-4EB2C1B Reverb Tank - Accutronics, 4EB2C1B, Medium Decay, 2-Spring
Long (2 Spring) tank, medium decay, 600Ω in / 2,250Ω out. Input insulated/output grounded connectors. Horizontal/open side down mounting. Compatible amps include Peavey™ Bravo 112, Encore 65, Classic 30, Backstage 30, Valveking 100, Windsor Studio (Replaces Peavey™ part number 71011114) . Also a suitable upgrade/ replacement for the Vox™ AC30CC series amp.
$23.95
P-RK-4EB3C1B Reverb Tank - Accutronics, 4EB3C1B, Long Decay, 2-Spring
Long (2 Spring) tank, long decay, 600Ω in / 2,250Ω out. Input insulated/output grounded connectors. Horizontal/open side down mounting. Counter-wound and coupled springs deliver superior mechanical performance and classic sound.
$24.95
P-RK-8AB2A1B Reverb Tank - Accutronics, 8AB2A1B, Medium Decay, 3-Spring
Short (3 Spring) tank, medium decay, 10Ω in / 2,575Ω out. Input grounded/output grounded connectors. Horizontal/open side down mounting. Designed for applications in which the overall sound quality is important and a compact package is required.
$22.95
P-RK-8AB2B1B Reverb Tank - Accutronics, 8AB2B1B, Medium Decay, 3-Spring
Short (3 Spring) tank, medium decay, 10Ω in / 2,575Ω out. Input grounded/output insulated connectors. Horizontal/open side down mounting.
$22.95
P-RK-8AB2D1A Reverb Tank - Accutronics, 8AB2D1A, Medium Decay, 3-Spring
Short (3 Spring) tank, medium decay, 10Ω in / 2,575Ω out. Input insulated/output insulated connectors. Horizontal/open side up mounting. Designed for applications in which the overall sound quality is important and a compact package is required.
$22.95
P-RK-8AB3C1B Reverb Tank - Accutronics, 8AB3C1B, Long Decay, 3-Spring
Short (3 Spring) tank, long decay, 10Ω in / 2,575Ω out. Input insulated/output grounded connectors. Horizontal/open side down mounting.
$22.95
P-RK-8BC2C1A Reverb Tank - Accutronics, 8BC2C1A, Medium Decay, 3-Spring
Designed for applications in which the overall sound quality is important and a compact package is required. Small in size, this three spring reverb approaches the rich textural quality of larger reverb units. Replaces: 8BC2C1A Solid, sturdy construction Type: Short (3 Spring) tank Decay: medium decay Input: 190 Ω Output: 12,000 Ω Connectors: Input insulated/output grounded Locking: No lock Mounting: Horizontal/open side up
$22.95
Don't see what you're looking for? Send us your product suggestions!