Click each question to see its answers.
I'm guessing it is, but is this the one to get for a blues deville 410 from 1994?
Asked by Anonymous on May 31st, 2017.
The original Blues Deville takes a 4BB3C1B and the reissue takes a 4EB3C1B.
Okay so I definitely need something with BB in the code right? 4BB2C1B would work and 9BB2C1B as well? (But they would sound different obviously)
Yes if you have an original 90's Blues Deville you can use any tank with BB as the second and third character.
What should my ohm meter read on a 9EB2C1B? Is this the right tank for a Peavey Stereo Chorus 400?
Asked by Bill Rowan on February 18th, 2018.
The input should read 800 ohms and the output 2,575 ohms. We are not sure if this is the correct replacement for a Peavey Chorus 400.
I have an original Peavey Stereo Chorus 400. The part number is 9EB2C1B
Hi, this tank is compatible with Peavey Classic 30 amps, correct?
Asked by Anonymous on June 28th, 2016.
From doing a quick internet search, it seem that the Classic 30 uses a 4eb2c1b. The 9eb2c1b is the 3 spring version of this tank. This should work in your amp.
Hi, is this tank comparable to the one in my Peavey Nashville 400? All numbers match. Just checking before I purchase it. Dan
Asked by Anonymous on July 25th, 2016.
Hi, if the eight character number is the same then you should be fine.
Hi, this tank is compatible with Carvin Nomad 50?
Asked by Anonymous on August 7th, 2016.
Always pay close attention to the series of letters and numbers associated with each reverb tank. In this case 9EB2C1B. If these numbers match your existing tank then this replacement will be compatible. Please refer to our tech corner article explaining reverb tanks for a full explanation of what these numbers signify in terms of determining compatibility with your amp. https://www.amplifiedparts.com/tech_corner/spring_reverb_tanks_explained_and_compared
Will this reverb tank work in a Mesa Boogie Mark V Head?
Asked by Anonymous on October 18th, 2016.
Your tank should have a series of characters such as 9EB2C1B. From our limited research it appears that the Mark series uses a 9AB2A1B. I would confirm this by looking at your tank.
I need to replace a PRVL3EB2C1B (Ruby, Long 3 Spring) reverb in a VOX AC50PC2. Is this unit a direct replacement?
Asked by Anonymous on October 28th, 2016.
Yes, 3EB2C1B and 9EB2C1B are the same tank. The 3 in the Ruby tank and the 9 in the Accutronics tank both represent a long tank with 3 springs. For more information please see our article on reverb tanks: https://www.tubesandmore.com/tech-corner/spring-reverb-tanks-explained-and-compared
Will this tank work in a Fender DRRI?
Asked by Anonymous on February 14th, 2017.
Will this work for a Peavey Studio Pro 112 65 watt?
Asked by Anonymous on March 4th, 2017.
We are unsure if this is the right tank for your amp. You may want to contact Peavey directly for more information.
Hi, is this tank compatible with a peavey classic 50,is this an improvement compared to the stock reverb? i'm looking for a surf tone, thanks
Asked by Anonymous on March 9th, 2017.
As long as your original tank as EB as the second and third character then this tank should work and will give you a more intense reverb.
Hi, will this unit be ok for my Fender Champ 12 (red knob series), not sure how long this reverb unit is but I have an extension speaker cab that is 15.75 inches wide internally .
My speaker is an 8 inch 15 watt 8 ohm. Cheers
Asked by Anonymous on April 20th, 2017.
From our brief research it appears your amp came stock with a 8AC2A1B. With that in mind, this tank is not compatible wit your amp.
Where is this made?
Asked by Anonymous on May 23rd, 2017.
All Accutronic tanks are made in South Korea.
Hi, will this tank work with a peavy valveking 112?
Asked by Anonymous on August 2nd, 2017.
It looks like the original tank in the Valveking is an 8EB2C1B. This is the same tank but longer (16.75"). If you have the room this should be compatible.
Hi, The type 9 series is listed on accutronics' site as a 6 spring unit. Is this a 3 spring or 6 spring unit?
Asked by Anonymous on February 13th, 2018.
The 9 series tanks have 3 springs.
Will this pan work in a Peavey Nashville 1000?
Asked by Anonymous on May 7th, 2018.
We do not have any information on the Nashville 1000 but if it is anything like the other Nashville models then it should be compatible.
Will this work in a Vox AC30CC2?
Asked by Anonymous on November 12th, 2018.
This is the designated tank for the Vox AC30CC, but we are unable to verify it is the correct replacement for a AC30CC2. If your amp has an input impedance of 800 Ohms and an output impedance of 2575 Ohms, this should work for your amp.
hola. podria usar el tanque nº 9EB2C1B en un amplificador Traynor YCV80?
Asked by Anonymous on December 26th, 2018.
We do not have specs on the tank that was used in that particular am, but Traynor claims that the YCV80 came with a two spring tank, and this tank has three, so it is not the direct replacement.
Does this tank work with a Genz Benz el diablo 50/100 combo? If not what tank do i need?
Asked by Anonymous on March 2nd, 2019.
We do not have cross reference materials to be able to provide you with a tank number used in those amps. We suggest you take the original tank out of the amp, visually inspect it, and see if there is a model number you can work with.
Will this tank work in a Blues Deluxe Reissue?
It calls for a 4EB3C1B.
Asked by Anonymous on October 7th, 2019.
The 9EB2C1B is acceptable as a replacement for a 4EB3C1B.
This part number is exact match for my Peavey Stereo Chorus 400.
Asked by Anonymous on December 5th, 2018.