Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
Relay - SPDT, Leslie 122 Retrofit
Reliable replacement relay for the Leslie 122. The small size makes this high quality relay easy to retrofit in the 122. Its performance exceeds the original relays used in the Leslie 122 with its very low switching noise and high ratings on both the contacts and the coil.
Features:
- 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts
- Coil EMC suppression
| Ambient temperature range | -40…+85 °C | ||
| Coil DC/sens. DC | (0.73…1.5)UN / (0.8…1.5)UN | ||
| Coil Holding voltage AC/DC | 0.8 UN / 0.4 UN | ||
| Coil Must drop-out voltage AC/DC | 0.2 UN / 0.1 UN | ||
| Coil Nominal voltage (UN) | 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 V AC (50/60 Hz) | ||
| Coil Operating range AC | (0.8…1.1)UN | ||
| Coil Rated power AC/DC/sens. | 1.2/0.65/0.5 DC VA (50 Hz)/W/W | ||
| Contact Breaking capacity DC1 | 30/110/220V:16/0.3/0.12A | ||
| Contact Minimum switching load | 500 (10/5) mW (V/mA) | ||
| Contact Rated current/Maximum peak current | 16/30A | ||
| Contact Rated load AC1 | 4000 VA | ||
| Contact Rated load AC15 (230 V AC) | 750VA | ||
| Contact Rated voltage/Maximum switching voltage | 250/400VAC | ||
| Contact Single phase motor rating (230 V AC) | 0.55 kW | ||
| Contact configuration | 1 CO (SPDT) | ||
| Dielectric strength between open contacts | 1000 V AC | ||
| Electrical life at rated load AC1 cycles | 100x10^3 | ||
| Insulation between coil and contacts (1.2/50 µs) | 6 kV (8 mm) | ||
| Mechanical life cycles | 10x10^6 | ||
| Operate/release time ms | 7/3 - (12/4 sensitive) | ||
| Standard contact material | AgCdO | ||
| Packaging Dimensions | 1.192 in. × 1.141 in. × 0.472 in. | ||
| Weight (Packaging) | 0.0375 lbs. | ||
 Pinout | All Models |
My Project Lists
Specifications, Files, and Documents
Pinout Questions? Contact us at [email protected], or give us a call at 480-296-0890
Product Reviews
Discovered this relay while looking for the traditional relay I'm accustomed to using. It was not available and the Retrofit one was being offered. Never saw it nor heard about it before. So, thought I would give it a try. I like it. It's small and quiet when switching and fairly easy to install. I use an7/8" Velcro Pad to fasten it inside the chassis of amp. Good product.