Radio & Antique Equipment Parts
Input - 120V, 60 Hz. "A" Output - Adjustable and regulated 1.5 to 7.5 volts 1.5 Amps "B" Output - 22, 45, 67, 90, and 135 volts regulated up to 50mA. "C" Output - Adjustable 0 to 22 volts. Regulated. Kit includes transformer, rectifiers, capacitors, resistors, transistors, I.C., regulator, white pine board, and all necessary hardware. Easy to follow instructions for assembly.
Now your antique radio can play some of the same programs it did when it was new! With your cassette tape player, phonograph or high output microphone, this one tube transmitter becomes a miniature AM broadcasting station, patterned after the 1939 Zenith model S-7000 Wireless Record Player. Assemble on a 4 inch x 6.5 inch board. All parts and instructions included.
High impedance crystal earphone - very sensitive and works great with crystal radios. Has 3 a foot cord and miniature (3.5 mm) plug.
Will replace broadcast band coils in any tube type radio. Adjustable inductance for perfect tracking. Mount on bus wire leads or in 5/16" hole for pine board mounting. Coils are similar to Miller numbers that correspond.
- Primary coil inductance: 2mH
- Secondary coil inductance: 191uH
Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.
Coil is similar to Miller number 70-RF. Coil is similar to Miller number 70-RF R.F. stage coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The R.F. coils have high impedance primaries and wire wound secondaries for use with any variable condenser having a maximum capacity between 250 and 450 mmf. These coils are for use in all common padded and unpadded oscillator circuits.
Reproduction paper station inserts like used on Philco and other late 30s and 40s vintage radios with bush-button tuning. Over 300 stations privided with 3/16 high letters in translucent ivory color on black background. Trim to size to fit various models.
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Overall dimensions 1 1/8" dia. x 1/4" thick.
Package of 5Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
Package of 6Assortment of knob springs for 1/2 moon shaft. 3/8" high x 9/32" outside dia. "D" shaped package of 6.
Replacement upper slow motor assembly for Leslie models 122/147. Overall shaft length is 2.75".
Replacement lower slow motor assembly for Leslie models 122/147. Overall shaft length is 2.75".
Upper slow motor rebuild kit fits Leslie models 122/147. Includes installation instructions.
Lower slow motor rebuild kit for Leslie models 122/147. Includes installation instructions.
Replacement upper drive belt , 25.5" circumference
Replacement lower drive belt, white, 31" circumference.
Replacement relay for Leslie Model 122, 110 VDC, 5 K , SPDT. The contacts are rated at 10A.
Replacement relay for Leslie model 147 amplifier, 115 VAC , SPDT. The contacts are rated at 10A.
Replacement rubber O ring for the Leslie 122 and 147 cabinets.
17" rotor cover fits Leslie models 122/147.
Replacement upper belt tension spring for Leslies.
Sealed upper tension idler bearing for Leslies
Sealed lower rotor bearing for Leslies.
6 pin male plug with wavy washer, for Leslies.