Radio & Antique Equipment Parts
Coil is similar to Miller number 70-RF. Coil is similar to Miller number 70-RF R.F. stage coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The R.F. coils have high impedance primaries and wire wound secondaries for use with any variable condenser having a maximum capacity between 250 and 450 mmf. These coils are for use in all common padded and unpadded oscillator circuits.
Will replace broadcast band coils in any tube type radio. Adjustable inductance for perfect tracking. Mount on bus wire leads or in 5/16" hole for pine board mounting. Coils are similar to Miller numbers that correspond.
- Primary coil inductance: 2mH
- Secondary coil inductance: 191uH
Replacement relay for Leslie Model 122, 110 VDC, 5 K , SPDT. The contacts are rated at 10A.
Replacement upper drive belt , 25.5" circumference
Replacement upper slow motor assembly for Leslie models 122/147. Overall shaft length is 2.75".
Upper slow motor rebuild kit fits Leslie models 122/147. Includes installation instructions.
Replacement lower slow motor assembly for Leslie models 122/147. Overall shaft length is 2.75".
6 pin female socket with wavy washer, for Leslies.
Lower slow motor rebuild kit for Leslie models 122/147. Includes installation instructions.
Replacement rubber O ring for the Leslie 122 and 147 cabinets.
6 pin male plug with wavy washer, for Leslies.
Replacement lower drive belt, white, 31" circumference.
Plug cover kit for Leslie , screws included. This is the connector cap for the connecting cable.
Replacement relay for Leslie model 147 amplifier, 115 VAC , SPDT. The contacts are rated at 10A.
17" rotor cover fits Leslie models 122/147.
Package of 33Replace deteriorated rubber parts in Leslie cabinets. Includes grommets, o-rings, bushings, plug.
Replacement upper belt tension spring for Leslies.
Sealed lower rotor bearing for Leslies.
Sealed upper tension idler bearing for Leslies
Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.
Now your antique radio can play some of the same programs it did when it was new! With your cassette tape player, phonograph or high output microphone, this one tube transmitter becomes a miniature AM broadcasting station, patterned after the 1939 Zenith model S-7000 Wireless Record Player. Assemble on a 4 inch x 6.5 inch board. All parts and instructions included.
Input - 120V, 60 Hz. "A" Output - Adjustable and regulated 1.5 to 7.5 volts 1.5 Amps "B" Output - 22, 45, 67, 90, and 135 volts regulated up to 50mA. "C" Output - Adjustable 0 to 22 volts. Regulated. Kit includes transformer, rectifiers, capacitors, resistors, transistors, I.C., regulator, white pine board, and all necessary hardware. Easy to follow instructions for assembly.
Package of 5Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
1 amp, 125VAC, 0.25W, single pole, single throw switched potentiometer. 24mm body.