Radio & Antique Equipment Parts

P-A480 Earphone - Crystal, 3.5mm, High Impedance
High impedance crystal earphone - very sensitive and works great with crystal radios. Has 3 a foot cord and miniature (3.5 mm) plug.
$3.25
P-R407 Grommet - Motor Mounting, package of 9
Package of 9
Rubber grommets for mounting phonograph motors. 1/2 dia. 5/16" high and ¼" inner dia.
$6.75
P-H200X Washer - 0.25" Inside Diameter, Felt
Package of 5
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
S-W7XL Wire - Hook-Up, Lacquered Spool
1000 Feet
Colors Available:
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. Multiple sizes and colors available. 105°C temperature rating, 600V.
Starting at $9.00
P-KS215 Knob Spring - package of 6
Package of 6
Assortment of knob springs for 1/2 moon shaft. 3/8" high x 9/32" outside dia. "D" shaped package of 6.
$0.50
Save 49%
Originally: $0.99
S-VIBRACONE Vibrapod Cone - 25 lb Support, Can Use with Vibrapods
Vibrapod Cones
  • Double truncated vinyl cone with 7/16 stationary chrome ball (it does not roll).
  • 1" tall by 1 5/8" diameter. 25 lbs maximum weight each.
  • Designed for use with Vibrapod isolators or by themselves.
  • Suitable for CD, DVD, DSS Receivers, DAC's, Pre amps, Amplifiers, Integrateds, Turntables, Speakers

Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane. You will notice an extended, more defined bass, improved imaging and sound stage, greater dynamics and detail, plus sharper video images. VIBRAPOD Isolators and Cones should be placed under flat areas of the component with more at or near the heaviest areas and at the edges.
$8.00
K-488 Kit - Pine Board Wireless Transmitter
Now your antique radio can play some of the same programs it did when it was new! With your cassette tape player, phonograph or high output microphone, this one tube transmitter becomes a miniature AM broadcasting station, patterned after the 1939 Zenith model S-7000 Wireless Record Player. Assemble on a 4 inch x 6.5 inch board. All parts and instructions included.
$49.95
S-M75 Dial Drive Cable - 0.028" (Standard Thin), per foot
Sold by the foot
No stretch black cord made of nylon braid over a fiberglass core. Standard thin, 0.028 diameter. Sold by the foot.
$1.00
S-F225 Brush - for Electroplating
Electroplating brush used for replating nickel, silver or brass radio and phonograph parts. Uses current from any 3 to 6 volt DC supply supply or batteries. Plating brush connects to positive voltage and part being plated connects to negative. Instructions included. Electroplating compound sold separately. Uses current from any 3 to 6 volt D.C. supply or batteries. Plating brush connects to positive voltage and part being plated connects to negative. Electroplating Compound (S-F222X) sold separately.
$11.95
K-101A Kit - Pine Board Power Supply with 3 Outputs
Input - 120V, 60 Hz. "A" Output - Adjustable and regulated 1.5 to 7.5 volts 1.5 Amps "B" Output - 22, 45, 67, 90, and 135 volts regulated up to 50mA. "C" Output - Adjustable 0 to 22 volts. Regulated. Kit includes transformer, rectifiers, capacitors, resistors, transistors, I.C., regulator, white pine board, and all necessary hardware. Easy to follow instructions for assembly.
$54.95
P-Q972 Diode - 1N34A Germanium
The 1N34A Germanium diode is an old standby in electronics. Widely used for detecting the rectifying efficiency or for switching on a radio, TV or stereo etc.
$1.75
R-VS-XA Potentiometer - Alpha, Audio, SPST Switch
1 amp, 125VAC, 0.25W, single pole, single throw switched potentiometer. 24mm body.
$2.65
P-OH-301 Belt - Leslie, Upper Drive, 25.5", for 122/147
Replacement upper drive belt , 25.5" circumference
$18.95
S-H408 Nut - Wire nut, Small
Package of 12
Small wire nuts, for use on appliances, televisions, stereos and antennas, package of twelve.
$0.20
SCHEMATIC Schematic Service - Radio, Hi-Fi Amps, Tuners, Receivers, etc.
To order a schematic, enter the make and model of your schematic and click the Add to Cart button. Alternatively, you can browse our library of schematics online to find the schematic you're looking for. We have a vast library of schematics and if we have the one you are looking for we'll send it to you. If we do not have what you need, we'll contact you to let you know.
$8.00
P-C70-OSC Coil - Miniature adjustable coil, 70, oscillator
Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.
$8.95
S-T8454 Alignment Kit - GC Electronics, for color TVs
Package of 6
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • 8608 Potentiometer Adjustment Tool
$7.95
P-C70-A Antenna Coil - for Tube Radios
Will replace broadcast band coils in any tube type radio. Adjustable inductance for perfect tracking. Mount on bus wire leads or in 5/16" hole for pine board mounting. Coils are similar to Miller numbers that correspond.
  • Primary coil inductance: 2mH
  • Secondary coil inductance: 191uH
$8.95
P-C70-RF Coil - Miniature adjustable coil, 70, R.F. stage
Coil is similar to Miller number 70-RF. Coil is similar to Miller number 70-RF R.F. stage coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The R.F. coils have high impedance primaries and wire wound secondaries for use with any variable condenser having a maximum capacity between 250 and 450 mmf. These coils are for use in all common padded and unpadded oscillator circuits.
$8.95
P-V1015X Vibrator - 4 Pin, for automobile radio
New manufacture solid-state replacement 4 pin vibrators. These replace our old line of solid state vibrators. 1-1/2 dia. x 2-¾" high aluminum can. Replace your buffer capacitor when you replace your vibrator!
S-F222X Electroplating Compound - for metal coating
Uses current from any 3 to 6 volt D.C. supply or batteries. Plating brush connects to positive voltage and part being plated connects to negative. Brush (S-F225) sold separately.
Available in multiple materials.
Starting at $17.95
S-C10-302 Cement - GC Electronics, Service Cement
A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.
$8.95
S-H11-4043-X Fahnestock Clip - electrical terminal for wire connections
Package of 6
Spring clip ¾" long for up to 15 ga. wire. Hole fits U.S. Screw size # 6. Package of 6.
$5.50
S-C217X Plastic Polish - Novus #2, fine scratch remover
Removes fine scratches, abrasions and haziness from plastic surfaces. Great for plastic radio dial windows. For best results, follow with Novus No. 1 polish.
Starting at $3.50
Don't see what you're looking for? Send us your product suggestions!