Radio & Antique Equipment Parts

S-T8454 Alignment Kit - GC Electronics, for color TVs
Package of 6
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • 8608 Potentiometer Adjustment Tool
$7.95
P-C70-A Antenna Coil - for Tube Radios
Will replace broadcast band coils in any tube type radio. Adjustable inductance for perfect tracking. Mount on bus wire leads or in 5/16" hole for pine board mounting. Coils are similar to Miller numbers that correspond.
  • Primary coil inductance: 2mH
  • Secondary coil inductance: 191uH
$8.95
P-OH-505 Bearing - Leslie, Lower Rotor
Sealed lower rotor bearing for Leslies.
$9.50
P-OH-504 Bearing - Leslie, Upper Tension Idler
Sealed upper tension idler bearing for Leslies.


Bore d
5.000 mm


Outside Diameter D1
19.0000 mm


Width B
6.00 mm


Fillet Radius ra
0.30 mm


Basic Dynamic Radial Load Rating C
2210 N


Basic Static Radial Load Rating Co
950 N


Grease Speed Rating Open/Shielded n1
36000 rpm


Oil Speed Rating Open/Shielded n2
43000 rpm


Sealed Speed Rating n3
26000 rpm
$8.75
P-OH-302 Belt - Leslie, 31", Lower Drive, for 122/147
Replacement lower drive belt, white, 31" circumference.
$19.45
P-OH-301 Belt - Leslie, Upper Drive, 25.5", for 122/147
Replacement upper drive belt , 25.5" diameter
$18.95
S-F225 Brush - for Electroplating
Electroplating brush used for replating nickel, silver or brass radio and phonograph parts. Uses current from any 3 to 6 volt DC supply supply or batteries. Plating brush connects to positive voltage and part being plated connects to negative. Instructions included. Electroplating compound sold separately. Uses current from any 3 to 6 volt D.C. supply or batteries. Plating brush connects to positive voltage and part being plated connects to negative. Electroplating Compound (S-F222X) sold separately.
$11.95
S-C10-302 Cement - GC Electronics, Service Cement
A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.
$8.06
Save 10%
Originally: $8.95
S-C220-1 Cleaner - Rubber Renue, 1 oz
Cleans and revitalizes rubber. Deglazes hardened rubber hoses, drive wheels and belts. Gives racing model tires more grip.
$7.16
Save 10%
Originally: $7.95
On Backorder
P-C70-OSC Coil - Miniature adjustable coil, 70, oscillator
Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.
$8.95
P-C70-RF Coil - Miniature adjustable coil, 70, R.F. stage
Coil is similar to Miller number 70-RF. Coil is similar to Miller number 70-RF R.F. stage coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The R.F. coils have high impedance primaries and wire wound secondaries for use with any variable condenser having a maximum capacity between 250 and 450 mmf. These coils are for use in all common padded and unpadded oscillator circuits.
$8.95
S-M905 Decal - Emerson
Water slide decal (not a sticker). Emerson treble-clef logo is gold with black outline, in 2 common sizes.
Contains the words:
  • 'OFF-ON'
  • 'VOLUME'
  • 'TONE'
  • 'BAND'
  • 'AM'
  • 'FM'
  • 'BC'
  • 'SW'
  • 'POL'
  • 'AV'

Sizes:
  • .55 x .75"
  • .70" x .95"
  • .6" x .15"
  • .24" x .15"
  • .65" x .15"
  • .24" x .15"
  • .4" x .15"
  • .24" x .15"
  • .45" x .15"
  • .4" x .15"
  • .24" x .15"
  • .25" x .15"
$5.95
S-M75 Dial Drive Cable - 0.028" (Standard Thin), per foot
Sold by the foot
No stretch black cord made of nylon braid over a fiberglass core. Standard thin, 0.028 diameter. Sold by the foot.
$1.00
P-Q972 Diode - 1N34A Germanium, Sold individually
A semiconductor device which passes current in the forward direction(from anode to cathode), and blocks current in the opposite direction.
$1.75
P-A480 Earphone - Crystal, 3.5mm, High Impedance
High impedance crystal earphone - very sensitive and works great with crystal radios. Has 3 a foot cord and miniature (3.5 mm) plug.
$3.25
S-F222X Electroplating Compound - for metal coating
Uses current from any 3 to 6 volt D.C. supply or batteries. Plating brush connects to positive voltage and part being plated connects to negative. Brush (S-F225) sold separately.
Available in multiple materials.
Starting at $17.95
S-H11-4034 Fahnestock Clip - package of 100
Package of 100
Spring clip ¾" long for up to 15 ga. wire. Hole fits U.S. Screw size # 6. Package of 100.
$74.00
S-H11-4043-6 Fahnestock Clip - package of 6
Package of 6
Spring clip ¾" long for up to 15 ga. wire. Hole fits U.S. Screw size # 6. Package of 6.
$5.50
S-H135 Form - Ceramic, 2-½" x ½" Diameter, 6-32 Threads
Use as a standoff, coil/choke form, or antenna coil.
$0.20
P-R407 Grommet - Motor Mounting, package of 9
Package of 9
Rubber grommets for mounting phonograph motors. 1/2 dia.5/16" highand ¼" inner dia.
$6.75
P-OH-509 Grommet Kit - All Rubber Parts, for Leslie
Package of 33
Replace deteriorated rubber parts in Leslie cabinets. Includes grommets, o-rings, bushings, plug.
$61.25
K-101A Kit - Pine Board Power Supply with 3 Outputs
Input - 120V, 60 Hz. "A" Output - Adjustable and regulated 1.5 to 7.5 volts 1.5 Amps "B" Output - 22, 45, 67, 90, and 135 volts regulated up to 50mA. "C" Output - Adjustable 0 to 22 volts. Regulated. Kit includes transformer, rectifiers, capacitors, resistors, transistors, I.C., regulator, white pine board, and all necessary hardware. Easy to follow instructions for assembly.
$54.95
K-488 Kit - Pine Board Wireless Transmitter
Now your antique radio can play some of the same programs it did when it was new! With your cassette tape player, phonograph or high output microphone, this one tube transmitter becomes a miniature AM broadcasting station, patterned after the 1939 Zenith model S-7000 Wireless Record Player. Assemble on a 4 x 6 1/2 board. All parts and instructions included.
$49.95
P-KS215 Knob Spring - package of 6
Package of 6
Assortment of knob springs for 1/2 moon shaft. 3/8" high x 9/32" outside dia. "D" shaped package of 6.
$0.50
Save 49%
Originally: $0.99
Don't see what you're looking for? Send us your product suggestions!