Pro Audio

F-ZS Fuse - Slow-Blow, 250V, 3AG, 0.25" x 1.25"
Package of 5
The 3AG Slo-Blo fuse solves a broad range of application requirements while offering reliable performance and costeffective circuit protection. Fits fuse block S-H259 and fuse holder S-H201.
Starting at $2.89
Save 11%
Originally: $3.25
S-H205 Fuse Holder - 3AG-Type, High Quality
High quality fuse holder used with 3AG type fuse. Fits in a 1/2" diameter chassis hole. Frame and cap material: phenolic Terminal material: Nickel-plated brass Mounted by nut
$1.83
Save 11%
Originally: $2.06
F-ZGMD-S Fuse - Slow-Blow, 250V, Miniature, 5mm x 20mm
Package of 5
Protect your expensive investment or hobby with inexpensive fuses. Time-delay, low breaking capacity. Rated at 250V. Package of 5
Starting at $3.34
Save 11%
Originally: $3.75
S-H201 Fuse Holder - for Fender®, 3AG-Type
High quality Fender® Style fuse holder replacement for guitar amplifiers.
  • Fits ½" chassis hole diameter
  • Mounted by Nut
$1.74
Save 11%
Originally: $1.95
S-H203 Fuse Holder Cap - Peavey
Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.
$2.63
Save 11%
Originally: $2.95
F-ZF Fuse - Fast-Blow, 250V, 3AG, 0.25" x 1.25"
Package of 5
Protect your expensive investment or hobby with inexpensive fuses.
$2.23
Save 11%
Originally: $2.50
F-ZGMA-F Fuse - Fast-Blow, 125 or 250V, Miniature, 5mm x 20mm
Package of 5
Protect your expensive investment or hobby with inexpensive fuses. • GMA Type • Rated at 250V • Measures .78"(20mm) in length, 0.19"(5mm) in diameter • Fast-Blow • Package of 5
$3.34
S-H204 Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length.
$3.12
Save 11%
Originally: $3.50
S-H259 Fuse Block - for 3AB and 3AG fuses, low profile
Open frame fuse holder with patented self-aligning, snap-in terminal clips. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The uniqu design permits self-alignment of clips to fuse cap. This, plus a one-piece clip / terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips.
$2.76
Save 11%
Originally: $3.10
P-HSMS-X Cable - ProCo Stagemaster, for Speaker
ProCo StageMaster cables are designed to be quiet, durable and dependable. Constructed from high quality materials and built to withstand everyday use. They are hand-soldered to perfection using top quality metal 1/4” connectors and extremely low-noise cable.
Starting at $6.67
Save 11%
Originally: $7.49
S-H200 Fuse Holder - for Marshall, ¼" Fuses
Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes). Suitable for 1/4" fuses. UL and CSA approved. Electrical Specifications:
  • Rated current: 10A
  • Rated voltage: 250V AC
  • Contact resistance: 2MΩ @ 250V DC or less
  • Dialectric withstand: 1 minute @ 1500V AC
  • Insulation resistance: 100MΩ or more @ 500V DC
$3.34
Save 11%
Originally: $3.75
P-HEG-FT Cable - ProCo Excellines, Guitar, Shielded
Sold by the foot
Make your own cable. Excellines 20 AWG 26 strand guitar cable.
Sold per foot
$0.67
Save 11%
Originally: $0.75
P-HSG-FT Cable - ProCo, Speaker, 2 Conductor, Non-shielded
Sold by the foot
Make your own cable. Excellines 16AWG two conductor non-shielded cable is sold by the foot.
$0.88
Save 11%
Originally: $0.99
P-HSMM-X Cable - ProCo Stagemaster, XLR for microphones
ProCo StageMaster low-impedance microphone cables are designed to be quiet, durable and dependable. These cables are hand-soldered with top-quality metal XLR connectors and extremely low-noise, twisted-pair wire.
  • Quiet and Durable CS-MIC.K 2-conductor Shielded Audio Cable
  • Terminated with High Quality Nickel Plated XLR Connectors for Years of Superior Performance and Maximum Value
  • Individually Tested to Meet Performance and Quality Requirements
Starting at $7.97
Save 11%
Originally: $8.95
P-GRV-GP525 Cable - Grover, XLR, 25', Female to Male Braided
A 6.5mm 2P braided microphone cable. Specifically designed to prevent shocks and allows for minimum hum or noise. Provides 100% signal!
Braided XLR Female to XLR Male phone plug, High Z
$17.31
Save 11%
Originally: $19.45
F-Z-KIT Fuse Kit - Fast and Slow Blo, 160 Fuses Total
Package of 160
Fuse kit, fast and slow blow.
Contains the following fuses:
  • 20x Slo-Blo, 2 Amp F-ZS020
  • 20x Slo-Blo, 3 Amp F-ZS025
  • 20x Slo-Blo, 1 Amp F-ZS010
  • 20x Slo-Blo, 4 Amp F-ZS035
  • 20x Slo-Blo, 5 Amp F-ZS040
  • 20x Fast-Blo, 2.5 Amp F-ZF020
  • 20x Fast-Blo, 1 Amp F-ZF010
  • 20x Fast-Blo, 3 Amp F-ZF025
$76.50
Save 11%
Originally: $85.95
P-GRV-GP6X0 Cable - Grover, Speaker, Nickel Plugs
Equipped with a ¼" nickel plated straight phone plug. Specifically designed cables prevent shocks and allows for minimum hum or noise providing 100% signal.
Starting at $14.46
Save 11%
Originally: $16.25
P-GRV-GP425 Cable - Grover, XLR Female, ¼" Male, 25', Braided
A 6.5mm 2P braided microphone cable. Specifically designed to prevent shocks and allows for minimum hum or noise. Provides 100% signal!
Braided XLR Female to 1/4" phone plug, High Z
$17.31
Save 11%
Originally: $19.45
P-HSG16-X Cable - ProCo Excellines, for Speaker / Instrument
Professional grade ProCo Excelline premium speaker cable. ProCo Excelline cables just work, assuring that the only distortion in your sound comes from your pedal-board. Sometimes buzz or distortion is good—but not when it comes from a bad cable. 2-conductor, 16 AWG. Made In USA.
Starting at $12.68
Save 11%
Originally: $14.25
S-H206 Fuse Holder - Fender, for ¼" Fuses, PCB Mounting
PCB mounting. Suitable for ¼" D x 1 ¼" L fuses.
$3.52
Save 11%
Originally: $3.95
S-H207 Fuse Cap - PCB Mounting Universal
PCB Mount Fuse Cap.
  • 1.31” x 0.42”
  • Takes GMA sized fuse
$4.41
Save 11%
Originally: $4.95
P-SP2-500-CAP Replacement Fuse Holder Cap - For P-SP2-500
Fuse holder cap replacement for P-SP2-500 power receptacle.
$0.89
Save 11%
Originally: $1.00
Don't see what you're looking for? Send us your product suggestions!