Power Supplies & Accessories

P-G00X Grommet - Rubber for chassis
(Package of 5)
Listed diameter is inside diameter. Sold in packs of 5. Multiple options available.
Starting at $0.85
Save 11%
Originally: $0.95
P-SP2-106 Receptacle - for power cord
For connecting a detachable power cord to your amp.
$1.58
Save 10%
Originally: $1.75
P-HCABLECLAMP-10 Cable Clamp - for ½" Cable Diameter, Nylon
(Package of 10)
Nylon cable clamp with room for ½” cable outer diameter. Perfect for securing power cords to cabinet walls.
$1.26
Save 10%
Originally: $1.40
M-K080 Power Supply - Korg, 12V, 1500mA, Center Positive
Korg Power Supply, KA-310 adapter for X50, MicroX, R3, MR1000, or SP170.
Please note that this requires an AC power cord to make it useable. We sell this cord and the part number is S-W128.
$33.12
Save 10%
Originally: $36.80
P-H1300 Strain Relief - for ~\frac{35}{64}~" x ⅝" Hole, ~\frac{11}{32}~" Cord Diameter
For 35/64" x 5/8" chassis hole, 11/32" cord diameter. Fits most Fender® amps.
  • Protects the lifeline of your electric/ electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.
  • Securely anchors, insulates, and protects cables at panel entry points
$0.45
Save 10%
Originally: $0.50
S-W125X Cord - Power, 16 AWG, 3 Conductor, Black
Power Cord - (3 conductor) Bare End 8 or 12 feet, 16 AWG
Starting at $5.35
Save 10%
Originally: $5.95
S-W123X Cord - Power, 18 AWG, 3 Conductor, Detachable, Black, IEC
Three conductor, 8 or 12 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.
Starting at $4.45
Save 10%
Originally: $4.95
P-H1200 Strain Relief - for ¾" x ~\frac{27}{32}~" hole, ~\frac{5}{16}~" cord diameter
16/3 SJT, 5/16" cord diameter. These one piece Strain Relief Bushings securely anchor, absorb, and protect cables and wires from push/pull and twist forces, while insulating them from irregular or sharp panel edges. They are easily and quickly installed with special installation pliers or other hand or production tools. Black H.S. Nylon, and the temperature index is 105° Centigrade.
$0.45
Save 10%
Originally: $0.50
S-W104 Cord - Replacement Brown, Polarized Plug
2 conductor, 6', brown, 18 awg, polarized plug.
$2.39
Save 10%
Originally: $2.65
P-ECB-9V1A Battery Box - Gotoh, single, 9 volt
Single 9 volt battery box.
See P-ECB-9V1B for single battery box with removable adapter.
See P-ECB-9V2 for double battery box.
$12.56
Save 10%
Originally: $13.95
P-ECB-9V2 Battery Box - Gotoh, Dual, 9 Volt
Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries.
Four wood screws included.
Directions:
1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24")
2. Put the box in guitar body and fix it by screws.
$17.10
Save 10%
Originally: $19.00
P-H199 Cord Bracket - Peavey, for power cable
Bracket measures 2.45" horizontally. Mount measures .935" horizontally, and.941" vertically. Length of cylindrical shaft is .175" and the diameter is .19".
$1.89
Save 10%
Originally: $2.10
S-W118 Cord - Replacement Black, Non-Polarized
Black, SPT-1, non-polarized, tinned leads, 6' 18 awg.
$1.76
Save 10%
Originally: $1.95
P-SP2-104 Plug - AC, Flat, Brown
A new two-prong plug, acceptable as a retro or vintage substitute. The plug easily accepts our twisted 18 and 16 gauge wires (two-conductor only).
Wire Opening Diameter: 11.2 mm x 8.4 mm, 7/16" x 5/16"
UL Rating: 15A-125V
Made in Mexico
$2.48
Save 10%
Originally: $2.75
M-PAS-S Power Supply - Power-All System, 9V, 2000mA, for Effects Pedals
The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks - the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet! The Power-All's special circuit design offers the lowest noise floor of any digital power supply on the market. The PA-9S now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum.
$17.96
Save 10%
Originally: $19.95
P-SP2-500 Receptacle - AC, Mates with S-W123 & S-W124 with Fuse Holder
I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
$1.67
Save 10%
Originally: $1.85
P-H217 PCB - Marshall, Valve PCB TSL100/TSL122, Rev 20
Marshall PC Board for TSL 100 / 122. Rev 20. Marshall Part: M-TL10-60-02-01
$212.63
Save 10%
Originally: $236.25
P-H11-406 Strain Relief - Nylon, 120" x .220" Wire (SPT-1)
Two conductor, nylon, .12" x .22" wire (SPT-1).
$0.45
Save 10%
Originally: $0.50
S-W128 Cord - Korg, AC Power, UC-1800-U02LY
AC power cord for the Korg KA-310 power adapter (part number M-K080).
$8.96
Save 10%
Originally: $9.95
P-SP2-K-002 Receptacle - Interlock, Non-Polarized
(Package of 10)
Interlock receptacle, non-polarized. Package of 10.
$0.56
Save 38%
Originally: $0.90
M-K020 Power Supply - Korg, 4.5V, 500mA, Center Positive
Korg KA-193 wallwart power supply. For use with PX4, PX4B and PXR4.
  • Voltage: 4.5VDC
  • Current: 500mA
  • Tip positive; Sleeve negative
$8.51
Save 10%
Originally: $9.45
P-H11-402 Strain Relief - Rubber, for ¼" Diameter Hole
For 1/4 diameter hole.
$0.45
Save 10%
Originally: $0.50
M-K050 Power Supply - Korg, 9V, 500mA~1.2A, Center Negative
For use with MS2000, microKONTROL, microKORG, Etribes, DT7, AX1G/B, AX100G, AX1500, GT12, OT12, and PX3/3B.
$13.05
Save 10%
Originally: $14.50
S-W102-X Wire - 18 Gauge Braided Power Cord
Brown 2 conductor 18 gauge, stranded power cord, similar to woven cloth covered cords in early AC radios. 105°C temperature rating, 600V.
Starting at $22.50
Save 10%
Originally: $25.00
Don't see what you're looking for? Send us your product suggestions!