# Power Supplies & Accessories

#### Korg

Korg is a maker of synths, digital pianos, and other music production software and hardware.

#### Recycled Sound

"Guitar player, turn down!" Those words are heard so regularly because tube amps sound best when the power stage is pushed, often resulting in a louder volume than a venue or gig permits. That's where an attenuator comes in: Placed between the speaker output of a combo or head and the speaker, it lowers or "attenuates" the volume-ideally without affecting the tone of the amp.
Power Supply - 4.5V, 500mA, Center Positive, for Korg PX4, PXR4
KA-193 wallwart power supply. For use with PX4, PX4B and PXR4.
• Voltage: 4.5VDC
• Current: 500mA
• Tip positive; Sleeve negative
$9.45 Power Supply - Korg, 9V, 500mA~1.2A, Center Negative For use with MS2000, microKONTROL, microKORG, Etribes, DT7, AX1G/B, AX100G, AX1500, GT12, OT12, and PX3/3B.$14.50
Cord - Korg, AC Power, UC-1800-U02LY
AC power cord for the Korg KA-310 power adapter (part number M-K080).
$9.95 Power Supply - Korg, 12V, 1500mA, Center Positive Korg Power Supply, KA-310 adapter for X50, MicroX, R3, MR1000, or SP170. Please note that this requires an AC power cord to make it useable. We sell this cord and the part number is S-W128.$34.95
Attenuator - Recycled Sound, Power Plug 100, -10 dB to -30dB
The Power Plug 100 offers the same -10db as the Power Plug Lite (M-PPLITE) but adds another "Bedroom Level" pot for further attenuation of up to -30dB AND is suitable for amps up to 100 watts! Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume. So you can adjust your amp as usual and use the attenuator as an overall Master volume.
$189.95 Attenuator - Recycled Sound, Power Plug 6 / 12, -6dB or -12dB The Power Plug 6 / 12 attenuator is a "must have" device for anyone that plays a tube amp. If you want to work your power tubes without ear-splitting volume, you need an attenuator. The Power Plug is the BEST attenuator made for amps 50 watts and less. Simple 2 switch operation for -6db or -12db attenuation. Get your best tone! Why 6/12? Engage 1 switch and remove -6db of power. Engage the 2nd switch and you're -12db. That's a volume reduction of 60%. The Recycled Sound attenuator is a passive, resistive load with compensated impedance and EQ, which maintains the designated impedance, EQ'd such that no degradation in tone is noted, even at full -12db attenuation. Use it as a Master Volume, use it to save your hearing at practice, find your tube tone without getting thrown out of the club, use it to prevent blowing up your vintage or low power speakers. Use TWO in series and achieve -24db attenuation - bedroom level!$89.95
Power Supply - Korg, 12V, 1500mA, Center Negative
For use with KP-1, X5D, X5DR, SP100, KAOSSPAD and 05R/W.
$33.95 Attenuator - Recycled Sound, Power Plug Lite, -2 dB to -10 dB The Power Plug Lite offers up to -10db attenuation in a rotary switch with -2db increments. The Power Plug Lite will accept all impedances and is rated for up to 50 watt amps. The same cool extruded aluminum case as the original Power Plug (M-ATT-6-12) for those who want a lighter touch and more control. Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume.$114.95
Don't see what you're looking for? Send us your product suggestions!