1. Home
  2. Products
  3. Potentiometers

Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
products per page
R-VAXL Potentiometer - Alpha, Linear, Solid Shaft
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.
$1.55
R-VAXA Potentiometer - Alpha, Audio, Solid Shaft
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Audio taper. ¼" diameter shaft.
$1.55
R-V38-XL Potentiometer - Alpha, Linear, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.85
R-V38-XA Potentiometer - Alpha, Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.85
R-V38-X-RA Potentiometer - Alpha, Reverse Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.85
R-VB-L-SP Potentiometer - Bourns, Linear, Knurled Shaft
Bourns Linear Taper pots. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Starting at $2.50
R-VB-SP Potentiometer - Bourns, Audio, Knurled Shaft
Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Starting at $2.50
R-VS-XA Potentiometer - Alpha, Audio, SPST Switch
1 amp, 125VAC, 0.25W, single pole, single throw switched potentiometer. 24mm body.
$2.65
R-VB-L Potentiometer - Bourns, Linear, Solid Shaft
Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.65
R-VB-A Potentiometer - Bourns, Audio, Solid Shaft, 24mm
Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.
$2.65
R-VXL-M Potentiometer - Alpha, Linear, PC Mount, for Marshall
Linear. 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
$2.95
R-V38-10TOL-XL Potentiometer - 10% Tolerance, Linear, ⅜" Bushing
24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.
$2.95
R-VXA-M Potentiometer - Alpha, Audio, PC Mount
Replacement for Marshall. Audio taper, 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
$2.95
R-VC3M-RA Potentiometer - CTS, 3MΩ, Reverse Audio
24mm, ½" watt, 3/8" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.25
R-VS-1MA-SS Potentiometer - Alpha, 1MΩ, Audio, Switch
Alpha, 1 meg, switched potentiometer. (SPST) 24mm body, 13/8" long x ¼" diameter solid shaft.
$3.50
R-VCXA Potentiometer - CTS, Audio, Splined Nylon Shaft
24mm, ½" watt, ⅜" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.55
R-VC100KL Potentiometer - CTS, 100kΩ, Linear
24mm, ½" watt, 3/8" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.55
R-VC50KRA-M Potentiometer - CTS, 50kΩ, Reverse Audio, Solid Shaft
CTS reverse audio potentiometer, 50K.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Aluminum - Solid Shaft
$3.65
R-VC-ML Potentiometer - CTS, Linear, Solid Shaft
CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Aluminum - Solid Shaft
  • Includes (1) Nut and (1) Lock Washer
$3.75
R-VC-MA Potentiometer - CTS, Audio, Solid Shaft
  • Body Diameter: 24 mm
  • Power Rating 1/3 watt
  • Bushing Diameter: 3/8" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: 3/8"
  • Shaft Material: Aluminum - Solid Shaft
$3.75
R-V5W-100L Potentiometer - 100Ω, Linear, Knurled, 5W, Wirewound, 24mm
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$4.25
R-VCXJ-SS Potentiometer - CTS, J Taper, Solid Shaft, Panel Mount
CTS J Taper audio potentiometer.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/8"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass - Solid Shaft
$4.25
R-VC-KL-SP Potentiometer - CTS, Linear, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$4.50
R-VCXA-SP14 Potentiometer - CTS, Audio, Knurled Shaft, ¼" Bushing
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
The Series 450G Guitar Potentiometer is the same robust high-quality guitar potentiometer that has become the industry standard for top guitar manufacturers. Featuring reduced shaft wobble, low noise output, and smooth rotational feel, the Series 450G is supplied with standard tin-plated rear cover and solder lug terminals.
$4.50
Don't see what you're looking for? Send us your product suggestions!