Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
R-VPEC-L Potentiometer - Precision Electronics, Linear, 28mm
Linear, 28mm potentiometer with slotted solid shaft, made by Precision Electronics. 10% tolerance. 2 watts.
$20.95
P-ECB-78 Potentiometer - Dunlop, Wah, 10 kΩ linear
Genuine Dunlop replacement potentiometer for wah/volume.
  • 10 kΩ Linear
  • Gear included
$14.50
R-VPV-50KL-SW Potentiometer - Peavey, 50K, Linear, Switch
50K Linear, with push/pull switch. Mounting hardware not included.
$12.95
R-VWAH-LP Potentiometer - 100kΩ, Wah Replacement, Life, Smooth
100K Life Pot is a high grade Wah pot replacement. This wah pedal upgrade is sold with all necessary hardware and gear for immediate installation.
$11.95
R-VPSH-500KL-L Potentiometer - 500kΩ, Linear, Knurled Long, DPDT, Push-Push
  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • 75" bushing length
  • 38"-.52" shaft length.
$11.30
R-VB-XL-P Potentiometer - Bourns, Linear, Knurled Shaft, square
Potentiometer - Bourns, Linear Taper, Knurled Split Shaft, Premium
$9.95
R-VPSH-500KL Potentiometer - 500kΩ, Linear, Knurled Shaft, DPDT, Push-Push
Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push
  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • .40" bushing length
  • 38"-.52" shaft length.
$9.80
R-VTOCOS-XL Potentiometer - Tocos, RV24, Linear, 10%, 6mm Shaft
Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.
  • 24mm diameter, single-turn potentiometers
  • Carbon film element
  • Metal shaft and bushing
  • Panel mount
  • Ear-lug solder terminals
  • 6mm diameter slotted-end solid shaft
  • 10mm bushing length
  • 10mm shaft length (extended past bushing)
  • Linear Taper
$7.95
R-VB-XL Potentiometer - Bourns, Linear, Knurled, Conductive Polymer
Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.
Starting at $7.50
Save 27%
Originally: $10.25
R-VWAH-POT-X Potentiometer - Wah replacement pot with gear
Standard vintage style wah pots with solder lugs and gear included. Part # R-VWAH-POT (100K) has an audio taper. All others are linear.
Starting at $5.95
Save 34%
Originally: $8.95
R-VMG-10KL Potentiometer - Marshall, 10 kΩ, 9mm
Genuine Marshall replacement potentiometer for MG Series amps. 10 kΩ Linear, D-Shaft.
$5.95
P-ECB-253 Potentiometer - Dunlop, 1 kΩ FUZZ for the JDF2 Fuzzface
Genuine Dunlop replacement fuzz potentiometer for JDF2 Fuzz Face. 1 kΩ, linear, solid plastic shaft. Made In U.K.
$5.25
R-VPV-50KLWW Potentiometer - Peavey, 50K, Linear, Wire Wound, 30 Detents
50K Linear, wire wound, XL shaft. 30 detents evenly-spaced throughout its rotation. Mounting hardware not included.
$4.95
R-VKG-XL Potentiometer - Marshall, Linear, 11mm, PC Mount, Square
Linear taper square body PC mount potentiometer by Marshall. Body width = 11mm
See R-VKG-XA for the Audio taper equivalent
$4.95
R-VPV-XL Potentiometer - Peavey, Linear, Spider
Peavey Linear Potentiometer, Spider-Style PC Mount Terminals. Knurled, split shaft.
$4.95
R-VCXL-SP-L Potentiometer - CTS, Linear, Knurled Shaft, ¾" Bushing
CTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95
R-VC-KL-SP Potentiometer - CTS, Linear, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
  • 1 nut
  • 1 lock washer
$4.50
R-V5W-100L Potentiometer - 100Ω, Linear, Knurled, 5W, Wirewound, 24mm
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$4.25
R-VPV-XL-B Potentiometer - Peavey, Linear, Mini, Bracket
Linear snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.
Starting at $4.25
R-V22KL-BP-M Potentiometer - Marshall, 22kΩ, Linear, Bias, for JMP
22kΩ linear taper. Used as bias / trim potentiometer for JMP.
$3.95
R-VPV-50KL Potentiometer - Peavey, 50kΩ, Linear, Center Detent
50K Linear, spider. Center detent. See R-VPV-50KL-R for a version without detent. Mounting hardware not included.
$3.95
R-V10KLX2-M-16 Potentiometer - Marshall, 10kΩ, Linear, Dual, 16mm
10K dual linear, 16mm, 7mm bushing.
$3.95
R-VPV-50KL-45 Potentiometer - Peavey, 50kΩ, Linear, Slide, 45mm travel
50 kΩ linear slide potentiometer by Peavey. Travel length is 45 mm
$3.75
R-VC-ML Potentiometer - CTS, Linear, Solid Shaft
CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Aluminum - Solid Shaft
  • Includes (1) Nut and (1) Lock Washer
$3.75
Don't see what you're looking for? Send us your product suggestions!