Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.

Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
R-VPEXASP-1 Potentiometer - PEC Guitar, Audio, Split Shaft
Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, 24mm potentiometer with stainless steel split knurled shaft and one piece brass housing. Mechanical rotation: 300°, ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ¼" bushing length. 1 watt.
Includes 1 nut and 1 lock washer.
$40.01
Save 11%
Originally: $44.95
R-VPE500KASPL-1 Potentiometer - PEC Guitar, 500kΩ, Audio, Long Bushing
Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, stainless steel shaft and housing. Mechanical rotation: 314° ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ½" bushing length.
$40.01
Save 11%
Originally: $44.95
R-VX-S1 Potentiometer - Fender®, S-1, Knurled Shaft, 4PDT
The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.
$22.21
Save 11%
Originally: $24.95
R-VB-A-XL Potentiometer - Bourns, Audio, Knurled Shaft, ¾" Bushing
Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.625" L x 0.5" D
  • 300° rotation
  • Power Rating: ¼ watt
  • ¼" Knurled 18-Spline Split Shaft
  • ¾" Bushing Length
  • Tolerance: ±20 %
  • Very Low Noise
$15.58
Save 11%
Originally: $17.50
R-VB-CPSP Potentiometer - Bourns, Audio, Knurled Shaft, ⅜" Bushing
Bourns Audio Potentiometer, Vintage Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.377" L x 0.625" D
  • 300° rotation
  • Power Rating: ¼ watt
  • Tolerance: 10 %
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • J Hooks
  • Specifically designed for vintage guitars
  • Very Low Noise
Starting at $14.24
Save 11%
Originally: $16.00
R-V250K-PP-SP Potentiometer - Fender®, 250kΩ, Knurled Shaft, Push-Pull
250K ohm (audio taper), push-pull DPDT, split shaft. Made in Korea.
$11.53
Save 11%
Originally: $12.95
R-VPV-50KL-SW Potentiometer - Peavey, 50K, Linear, Switch
50K Linear, with push/pull switch. Mounting hardware not included.
$11.53
Save 11%
Originally: $12.95
R-VDSP250S Potentiometer - Dunlop, Super Pot, Solid Shaft, 250kΩ
The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.
  • 250K Audio taper
  • Solid shaft
  • Proprietary technology
  • Resistant to dust and corrosion
$10.24
Save 11%
Originally: $11.50
R-VDSP Potentiometer - Dunlop, Super Pot, Split Shaft
The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.
  • Audio taper
  • 24-knurl split shaft
  • Proprietary technology
  • Resistant to dust and corrosion
$10.23
Save 11%
Originally: $11.50
R-VPSH-500KA-L Potentiometer - 500kΩ, Audio, Knurled Long, DPDT, Push-Push
DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .75" bushing length, .38"-.52" shaft length.
$10.06
Save 11%
Originally: $11.30
R-VPSH-500KL-L Potentiometer - 500kΩ, Linear, Knurled Long, DPDT, Push-Push
  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • 75" bushing length
  • 38"-.52" shaft length.
$10.06
Save 11%
Originally: $11.30
R-VB-A-P Potentiometer - Bourns, Audio, Knurled Shaft, 24mm
Knurled split shaft, audio. 24 mm body diameter. 1/4" watt, 300° rotation. 1/4" shaft diameter. Solder lugs. 3/8" bushing.
$9.75
Save 11%
Originally: $10.95
R-VB-PPSP Potentiometer - Bourns, Audio, Knurled Shaft, Push-Pull, Mini
Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
  • 17mm Body Diameter
  • 300° rotation
  • Power Rating: 0.1 watt
  • ¼" Knurled 18-Spline Split Shaft
  • DPDT Push-Pull Switch
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
$8.86
Save 11%
Originally: $9.95
R-VB-XL-P Potentiometer - Bourns, Linear, Knurled Shaft
Potentiometer - Bourns, Linear Taper, Knurled Split Shaft, Premium
$8.86
Save 11%
Originally: $9.95
R-VPSH-250KA Potentiometer - 250kΩ, Audio, Knurled Shaft, Push-Push, DPDT
DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .40" bushing length, .38"-.52" shaft length.
$8.72
Save 11%
Originally: $9.80
R-VPSH-500KA Potentiometer - 500kΩ, Audio, Knurled Shaft, DPDT, Push-Push
DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .40" bushing length, .38"-.52" shaft length.
$8.72
Save 11%
Originally: $9.80
R-VPSH-500KL Potentiometer - 500kΩ, Linear, Knurled Shaft, DPDT, Push-Push
Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push
  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • .40" bushing length
  • 38"-.52" shaft length.
$8.72
Save 11%
Originally: $9.80
R-VCXA-PP Potentiometer - CTS, Audio, SPST, Push-Pull, Solder Lug
Audio, SPST, solder lugs, ⅜" bushing, 24mm
Starting at $7.97
Save 11%
Originally: $8.95
R-VF-250K-500K Potentiometer - Fender, Audio, concentric Solid Shaft, 250k/500kΩ
Original Fender, Audio potentiometer ,Concentric, Solid Shaft, Resistance: 250/500k Ohm
  • Body Diameter 0.95”
  • Body Depth: . 0.87”
  • Bushing Diameter: 3/8”
  • Bushing Length: 1/4”
  • Shaft Diameter: 0.18”/0.26”
  • Shaft Length: 0.56"
  • Shaft Type: Concentric Solid Shaft
  • 300° rotation
  • Hardware not included
$7.57
Save 11%
Originally: $8.50
R-VB2 Potentiometer - Bourns, Audio, Solid Shaft, Dual Mini, Push-Pull
Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 1/4" shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
$7.08
Save 11%
Originally: $7.95
R-VB2-500KAPPSP Potentiometer - Bourns, Audio, Knurled, Dual Mini, Push-Pull, 500K
Bourns Mini Carbon Element, DPDT Push Pull Switch, Dual Audio, Split Shaft. ¼" watt, 300° rotation. Solder lugs.
  • 17mm Body Diameter
  • 300° rotation
  • Power Rating: 0.1 watt
  • ¼" Knurled 18-Spline Split Shaft
  • DPDT Push-Pull Switch
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
  • Bourns Series Number PDB183-GTR21
$7.08
Save 11%
Originally: $7.95
R-VC500KA-DPDT-LS Potentiometer - CTS, 500kΩ, Audio, Knurled, .75" Bushing, DPDT
Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications.
$7.08
Save 11%
Originally: $7.95
R-VB-XL Potentiometer - Bourns, Linear, Knurled, Conductive Polymer
Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.
Starting at $6.85
Save 11%
Originally: $7.70
R-V1MJ-SS Potentiometer - Fender®, 1MΩ, J Taper, Solid Shaft, Panel Mount
Pot, Solid Shaft, 1M J Taper
$6.68
Save 11%
Originally: $7.50
Don't see what you're looking for? Send us your product suggestions!