Potentiometers
Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.

The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.
$24.95

Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470 kΩ. Original Dunlop replacement part.
$23.50

Audio, 28mm potentiometer with slotted solid shaft, made by Precision Electronics. 10% tolerance. 2 watts.
Starting at $22.95

250 kΩ gear shaft pot with an audio taper. Original Dunlop replacement part. Used in the Dunlop GCB80 High Gain Volume Pedal.
$19.95

Bourns Audio Potentiometer, Vintage Premium, Conductive Polymer, Solder Lugs
- 0.625" W x 0.377" L x 0.625" D
- 300° rotation
- Power Rating: ¼ watt
- Tolerance: 10 %
- ¼" Fine Knurled Split Shaft
- ⅜" Bushing Length
- J Hooks
- Specifically designed for vintage guitars
- Very Low Noise
$17.49

High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. The 350K resistance with an reverse audio (antilog) taper is perfect for germanium Fuzzrite builds. Includes mounting nut and lock washer. Features
- ⅜ in. Bushing
- Panel Mount
- Reverse Audio (Antilog) Taper
- Made in UK
- Life Expectancy of >20,000 cycles (tested at 30 times per minute)
- Conductive polymer (plastic) track (over twice the life of carbon tracks)
- Rotation angle: 300° ±5°
- Tolerance on Rated Resistance: ± 20%
$14.95

Genuine Dunlop replacement potentiometer for wah/volume.
- 10 kΩ Linear
- Gear included
$14.50

The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.
- Audio taper
- 24-knurl split shaft
- Proprietary technology
- Resistant to dust and corrosion
$13.95

The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots. Dunlop tested these pots past the 7 million turn mark. With results like that, these may be the last pots you ever have to put in your instrument.
- 250K Audio taper
- Solid shaft
- Proprietary technology
- Resistant to dust and corrosion
$13.95

Knurled split shaft, audio. 24 mm body diameter. 1/4" watt, 300° rotation. 1/4" shaft diameter. Solder lugs. 3/8" bushing.
$12.95

50K Linear, with push/pull switch. Mounting hardware not included.
$12.95

250 kΩ ohm. Original TBX tone control for most Strats and Teles. CTS manufactured, includes capacitor and comes in original Fender® packaging. Some instruments have a unique tone circuit that features a TBX Tone Control (Patented). The TBX (which stands for Treble Bass Expander), is a dual concentric stacked tone pot. The pot has a detent in the middle position. From 0 to 5 (at the detent), the TBX functions like a normal tone circuit with filtration through a capacitor. Advancing the knob counterclockwise from the detent position gradually filters off high frequencies, like a standard tone control. Rotate the knob clockwise from the detent position, and you add presence and brightness by allowing the pickups' natural resonance to come through. Fender part number: 099-2052-000
$12.65

Linear snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.
$12.50

Audio snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.
$12.50

DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .75" bushing length, .38"-.52" shaft length.
$11.95

- DPDT Push-Push switch
- ¼" split knurled shaft
- Linear taper
- 3/8-32 threads
- 16mm body diameter (widest point on switch body 17.8mm)
- 75" bushing length
- 38"-.52" shaft length.
$11.95

Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push
- DPDT Push-Push switch
- ¼" split knurled shaft
- Linear taper
- 3/8-32 threads
- 16mm body diameter (widest point on switch body 17.8mm)
- .40" bushing length
- 38"-.52" shaft length.
$10.95

DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .40" bushing length, .38"-.52" shaft length.
$10.95

DPDT switch, ¼" split knurled shaft, audio taper. 3/8-32 threads, 16mm body diameter. .40" bushing length, .38"-.52" shaft length.
$10.75

Audio taper, SPST push-pull, solder lugs, 3/8" bushing, 24 mm
$10.29

Potentiometer - Bourns, Linear Taper, Knurled Split Shaft, Premium
$9.95

Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.
Starting at $8.80
Save 2%
Originally: $8.95

Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
- 0.625" W x 0.625" L x 0.5" D
- 300° rotation
- Power Rating: ¼ watt
- ¼" Knurled 18-Spline Split Shaft
- ¾" Bushing Length
- Tolerance: ±20 %
- Very Low Noise
$8.80

10K Reverse Audio with bracket. Mounting hardware not included.
$8.50