Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
R-VPEC-L Potentiometer - Precision Electronics, Linear, 28mm
Linear, 28mm potentiometer with slotted solid shaft, made by Precision Electronics. 10% tolerance. 2 watts.
$20.95
R-VPEC-A Potentiometer - Precision Electronics, Audio, Slotted Shaft
Audio, 28mm potentiometer with slotted solid shaft, made by Precision Electronics. 10% tolerance. 2 watts.
Starting at $20.95
R-VPV-XL-B Potentiometer - Peavey, Linear, Mini, Bracket
Linear snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.
$12.50
R-VTOCOS-XL Potentiometer - Tocos, RV24, Linear, 10%, 6mm Shaft
Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.
  • 24mm diameter, single-turn potentiometers
  • Carbon film element
  • Metal shaft and bushing
  • Panel mount
  • Ear-lug solder terminals
  • 6mm diameter slotted-end solid shaft
  • 10mm bushing length
  • 10mm shaft length (extended past bushing)
  • Linear Taper
$7.95
R-VTOCOS-XA Potentiometer - Tocos, RV24, Audio, 10%, 6mm Shaft
Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each audio taper potentiometer includes a nut, flush washer, and lock washer.
  • 24mm diameter, single-turn potentiometers
  • Carbon film element
  • Metal shaft and bushing
  • Panel mount
  • Ear-lug solder terminals
  • 6mm diameter slotted-end solid shaft
  • 10mm bushing length
  • 10mm shaft length (extended past bushing)
  • Audio Taper
$7.95
R-VC-ML Potentiometer - CTS, Linear, Solid Shaft
CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Aluminum - Solid Shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95
R-VC-MA Potentiometer - CTS, Audio, Solid Shaft
  • Body Diameter: 24 mm
  • Power Rating 1/3 watt
  • Bushing Diameter: 3/8" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: 3/8"
  • Shaft Material: Aluminum - Solid Shaft
$4.95
R-VPV-XA Potentiometer - Peavey, Audio, Spider
Peavey Audio Potentiometer, Spider-Style PC Mount Terminals. Knurled, split shaft.
Starting at $4.95
R-VPV-100KX2-RA Potentiometer - Peavey, 100kΩ, Dual, Bracket
100K Dual Reverse Audio with bracket.
$3.95
R-V38-2XXA Potentiometer - Alpha, Audio, Dual, ⅜" Bushing
Alpha Dual Potentiometer Shaft Width: ¼" Shaft Length: 5/16" Bushing Diameter: ⅜" Bushing Length: ¼" Body Diameter: 24mm Body Height: 20mm Rotation: 300° Wattage Rating: 0.25w Voltage Rating: 250v Conductive Material: Carbon Composition
$3.85
R-VC100KL Potentiometer - CTS, 100kΩ, Linear
24mm, ½" watt, 3/8" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.55
R-VSN-100K Potentiometer - Fender, 100kΩ, Reverse Audio, D Shaft, Snap-In
Original Fender® snap-in potentiometer for more recent Fender® amps, 100K, reverse audio taper.
$3.50
R-VXA-M Potentiometer - Alpha, Audio, PC Mount
Replacement for Marshall. Audio taper, 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
$2.95
R-VA2XXL Potentiometer - Alpha, Linear, Dual
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper. ¼" diameter shaft.
$2.95
R-VXL-M Potentiometer - Alpha, Linear, PC Mount, for Marshall
Linear. 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
$2.95
R-VA2XXA Potentiometer - Alpha, Audio, Dual
24 mm carbon composition. 300° rotation. ¼" watt, 250VDC rating. ¼" diameter shaft.
$2.85
R-VAM100KAX2-K-PCL Potentiometer - Alpha, Audio, Knurled Shaft, Right Angle, 16mm, Dual, 100kΩ
100kΩ dual-gang 16mm potentiometers with a T18 knurled shaft and an audio taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
$1.85
R-V38-XL Potentiometer - Alpha, Linear, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.85
R-VAM100KLX2-SS-PCL Potentiometer - Alpha, Linear, Solid Shaft, Right Angle, 16mm, Dual, 100kΩ
100kΩ dual-gang 16mm potentiometers with a solid shaft and a linear taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$1.85
R-VAXA Potentiometer - Alpha, Audio, Solid Shaft
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Audio taper. ¼" diameter shaft.
$1.55
R-VAXL Potentiometer - Alpha, Linear, Solid Shaft
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.
$1.55
R-VXA-M-16 Potentiometer - Audio, 16mm, Marshall Style
Audio, 16mm, 7mm bushing, knurled split shaft
$1.45
R-VSN-XL-DS Potentiometer - Linear, D Shaft, 16mm, Snap-In, Bracket
Linear. 16mm body size (mini type) Snap-In pot with mounting bracket. D-Shaft ¼", ½" length shaft. 7mm bushing, ¼" bushing length. PC Mount. Nut and washer included
$1.45
R-VXL-M-16 Potentiometer - Linear, 16mm, Marshall Style
Marshall style linear taper 16mm potentiometer with 7mm bushing. Knurled split shaft.
$1.45
Don't see what you're looking for? Send us your product suggestions!