You are here

Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.
Check out our Tech Corder articles on pots, including Potentiometer Types.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
R-VPEXASP-1Potentiometer - PEC Guitar, Audio, Split Shaft
Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, 24mm potentiometer with stainless steel split knurled shaft and one piece brass housing. Mechanical rotation: 300°, ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ¼" bushing length. 1 watt.

Includes 1 nut and 1 lock washer.
$44.95
Click to read more
R-VPE500KASPL-1Potentiometer - PEC Guitar, 500K, Audio, Long Bushing

Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, stainless steel shaft and housing. Mechanical rotation: 314° ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ½" bushing length.


$44.95
Click to read more
R-V38-KITPot Kit - Alpha, ⅜" Bushing, 25 pcs

Kit of Alpha potentiometers with 3/8" bushing. Contains the following quantities & values



  • 6 - 1MA (R-V38-1MA)
  • 3 - 250KA (R-V38-250KA)
  • 2 - 100KA (R-V38-100KA)
  • 2 - 100KL (R-V38-100KL)
  • 2 - 250KL (R-V38-250KL)
  • 2 - 25KA (R-V38-25KA)
  • 2 - 25KL (R-V38-25KL)
  • 2 - 500KA (R-V38-500KA)
  • 2 - 500KL (R-V38-500KL)
  • 2 - 5KL (R-V38-500KL)

$40.00
Click to read more
R-VPEXASS-1Potentiometer - PEC Guitar, Audio, Solid Shaft

Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, 24mm potentiometer with stainless steel slotted solid shaft and one piece brass housing. Mechanical rotation: 300°, ¼" shaft diameter, ⅜" bushing diameter, ⅜" shaft length, ¼" bushing length. 1 watt.


$29.95
Click to read more
R-VPMT-DMTLPotentiometer - PMT, Dual Mode Tone Control, ¾" Shaft/Bushing

Precision Music Technologies DMT Control – Dual Mode High Pass & Low Pass Tone Control. Made in USA. The DMT Tone Control is a passive dual mode tone filter than can operate in either high pass or low pass modes. This greatly expands the utility of the instruments controls vs. a traditional tone control. A frequency selector switch for each mode further adds to the DMT Controls versatility. Push-pull pot: 500KA, 16 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/4”. PCB dimentions: 1.06” x 0.70” x 0.07”


$25.00
Click to read more
R-VPMT-HCPPotentiometer - PMT, Humbucker Control, Coil Filters

Precision Music Technologies HCP Control – Humbucker Control Pot w/ Coil Filter Modes. Made in USA. The HCP Humbucker Control Pot is a passive dual mode coil selector that eliminates the additional switches associated with coil splitting a pair of humbuckers which greatly simplifies operation. Push-pull pot: 500KA, 16 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/8”. PCB dimentions: 1.06” x 0.70” x 0.07”


$22.75
Click to read more
P-ECB-24APotentiometer - Dunlop Hot Potz, 470K

Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470K ohm. Original Dunlop replacement part.


$19.95
Click to read more
P-ECB-24CPotentiometer - Dunlop, 20K, Custom Taper, Wah Pot, for Bass

Custom taper 20k Dunlop potentiometer used in 105Q Crybaby Bass Wah. 1 million cycles, maintenance free.


$19.95
Click to read more
R-VPMT-DMTPotentiometer - PMT, Dual Mode Tone Control, ⅜" Shaft/Bushing

Precision Music Technologies DMT Control – Dual Mode High Pass & Low Pass Tone Control. Made in USA. The DMT Tone Control is a passive dual mode tone filter than can operate in either high pass or low pass modes. This greatly expands the utility of the instruments controls vs. a traditional tone control. A frequency selector switch for each mode further adds to the DMT Controls versatility. Push-pull pot: 500KA, 16 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/8”. PCB dimentions: 1.06” x 0.70” x 0.07”


$19.50
Click to read more
R-VB-CPSPPotentiometer - Bourns, Audio, Knurled Shaft, ⅜" Bushing
Bourns Audio Potentiometer, Vintage Premium, Conductive Polymer, Solder Lugs

  • 0.625" W x 0.377" L x 0.625" D
  • 300° rotation
  • Power Rating: ¼ watt
  • Tolerance: 10 %
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • J Hooks
  • Specifically designed for vintage guitars
  • Very Low Noise
Starting at $16.00
Click to read more

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Potentiometers