Potentiometers
Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$4.25
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.
$1.55
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Audio taper. ¼" diameter shaft.
$1.55
- Body Diameter: 24 mm
- Power Rating 1/3 watt
- Bushing Diameter: 3/8" (Threading: 3/8-32)
- Bushing Length: ¼"
- Shaft Diameter: ¼"
- Shaft Length: 3/8"
- Shaft Material: Aluminum - Solid Shaft
$4.95
Standard fit for most vintage American made tube amps.
$1.85
Audio taper, SPST push-pull, solder lugs, 3/8" bushing, 24 mm
$8.95
24mm, ½" watt, ⅜" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.55
Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.65
CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
- Body Diameter: 24 mm
- Power Rating ⅓ watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: ¼"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Aluminum - Solid Shaft
- Includes (1) Nut and (1) Lock Washer
$4.95
50K Linear, wire wound, XL shaft. 30 detents evenly-spaced throughout its rotation. Mounting hardware not included.
$4.95
50K Linear, with push/pull switch. Mounting hardware not included.
$12.95
Tone control for Eric Clapton mod kit. Original Fender, 50K Audio, Split Shaft, 1/4" Bushing
$5.25
Standard fit for most vintage American made tube amps.
$1.85
Standard vintage style wah pots with solder lugs and gear included. Part # R-VWAH-POT (100K) has an audio taper. All others are linear.
$5.95
24mm, ½" watt, 3/8" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.55
Audio taper, knurled split shaft, sealed body 24mm potentiometer
$6.80
Potentiometer - Fender®, 250kΩ, Knurled Shaft, No Load
250K ohm. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging. Some Fender guitars have a unique tone circuit that features a "Delta Tone' Control. The "Delta Tone' system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors.
$7.45
250K ohm, solid shaft, no load. Some Fender guitars have a unique tone circuit that features a "Delta Tone" Control. The "Delta Tone" system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors. Unlike the TBX, which has a detent at the 5 position and gradually reduces the amount of filtration through the capacitor, the Delta-Tone's 'no-load' feature eliminates filtration completely at the detent and the result is more of the direct presence of the pickup.
$7.45
250K ohm, audio taper. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging.
$6.95
250 kΩ ohm. Original TBX tone control for most Strats and Teles. CTS manufactured, includes capacitor and comes in original Fender® packaging. Some instruments have a unique tone circuit that features a TBX Tone Control (Patented). The TBX (which stands for Treble Bass Expander), is a dual concentric stacked tone pot. The pot has a detent in the middle position. From 0 to 5 (at the detent), the TBX functions like a normal tone circuit with filtration through a capacitor. Advancing the knob counterclockwise from the detent position gradually filters off high frequencies, like a standard tone control. Rotate the knob clockwise from the detent position, and you add presence and brightness by allowing the pickups' natural resonance to come through. Fender part number: 099-2052-000
$12.65
Potentiometer - Fender®, 250kΩ, Solid Shaft
250K ohm, solid shaft. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender® packaging.
$6.95
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
Includes:
- 1 nut
- 1 lock washer
$5.45
Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
- 24mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 250V
Starting at $2.50
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
Includes:
- 1 nut
- 1 lock washer
$5.45