Potentiometers
Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.

Marshall style linear taper 16mm potentiometer with 7mm bushing. Knurled split shaft.
$1.50

10K Reverse Audio with bracket. Mounting hardware not included.
$8.50

Audio. 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.40

Peavey Linear Potentiometer, Spider-Style PC Mount Terminals. Knurled, split shaft.
$4.95

Peavey Audio Potentiometer, Spider-Style PC Mount Terminals. Knurled, split shaft.
Starting at $4.95

Push-Pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, linear.
$3.55

Linear taper 16mm potentiometers with a T18 knurled shaft. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
- Lead Distance from shaft center: 16 mm (0.630”)
- Lead Thickness: 0.5 mm (0.020”)
$0.99

High-quality pcb mount linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
- Right-angle PCB mount
- Linear taper
- +/- 10% tolerance
- ¼” (6.35mm) solid shaft
- Machine-pressed dust seal
- High quality wiper material
- Low residual resistance
For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
$1.45

16mm solid shaft linear potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Bushing Length: 6.5mm (0.256")
- Shaft Diameter: 6.35mm ( 0.250")
- Taper: Linear
Starting at $0.99

Reverse audio taper 16mm solid shaft potentiometers with solder lug terminals. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Bushing Length: 6.5mm (0.256")
- Shaft Diameter: 6.35mm ( 0.250")
- Taper: Reverse Audio (Anti-Log)
$0.99

High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
- Solder lug / panel mount
- Linear taper
- +/- 10% tolerance
- ¼” (6.35mm) solid shaft
- Machine-pressed dust seal
- High quality wiper material
- Low residual resistance
For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45

Alpha Mini Pots with solid shaft and short PC mount terminals.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 3.8 mm (0.150”)
- Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
- Lead Thickness: 0.5 mm (0.020”)
$1.15

Linear taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
- Lead Distance from shaft center: 14.3 mm (0.563”)
- Lead Thickness: 0.5 mm (0.020”)
- Shaft Diameter: 6.35 mm (0.25”)
$0.85

High-quality pcb mount audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
- Right-angle PCB mount
- Audio taper
- +/- 10% tolerance
- ¼” (6.35mm) solid shaft
- Machine-pressed dust seal
- High quality wiper material
- Low residual resistance
For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
$1.45

16mm solid shaft audio potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Bushing Length: 6.5mm (0.256")
- Shaft Diameter: 6.35mm ( 0.250")
- Taper: Audio (Log)
Starting at $0.99

Reverse audio taper Alpha 16mm pots with a solid shaft and right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
- Lead Distance from shaft center: 16 mm (0.630”)
- Lead Thickness: 0.5 mm (0.020”)
- Shaft Diameter: 6.35 mm (0.25”)
$0.85

High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
- Solder lug / panel mount
- Audio taper
- +/- 10% tolerance
- ¼” (6.35mm) solid shaft
- Machine-pressed dust seal
- High quality wiper material
- Low residual resistance
For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45

Alpha Mini Pots with solid shaft and short PC mount terminals.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 3.8 mm (0.150”)
- Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
- Lead Thickness: 0.5 mm (0.020”)
$1.25

Audio taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
- Lead Distance from shaft center: 14.3 mm (0.563”)
- Lead Thickness: 0.5 mm (0.020”)
- Shaft Diameter: 6.35 mm (0.25”)
$0.85

Alpha Mini Pots with solid shaft and long PC mount terminals.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
- Lead Distance from shaft center: 16 mm (0.630”)
- Lead Thickness: 0.5 mm (0.020”)
Starting at $0.85

Linear snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.
$12.50