Potentiometers
Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.

24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have a linear taper and the solid shaft fits 6.35mm (¼”) knobs. For audio taper versions, see R-V38-10TOL-XA.
$2.95

24mm, solder lug potentiometers with 10% resistance tolerance. These ⅜” bushing pots have an audio taper and the solid shaft fits 6.35mm (¼”) knobs. For linear taper versions, see R-V38-10TOL-XL.
$2.95

- Body Diameter: 24 mm
- Power Rating 1/3 watt
- Bushing Diameter: 3/8" (Threading: 3/8-32)
- Bushing Length: ¼"
- Shaft Diameter: ¼"
- Shaft Length: 3/8"
- Shaft Material: Aluminum - Solid Shaft
$3.60

CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
- Body Diameter: 24 mm
- Power Rating ⅓ watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: ¼"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Aluminum - Solid Shaft
- Includes (1) Nut and (1) Lock Washer
$3.60

Standard fit for most vintage American made tube amps.
$1.70

24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Audio taper. ¼" diameter shaft.
$1.55

Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
- 24mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 250V
Starting at $2.50

Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.
Starting at $2.40

The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
Includes:
- 1 nut
- 1 lock washer
Starting at $4.25

1 amp, 125VAC, 0.25W, single pole, single throw switched potentiometer. 24mm body.
$2.65

Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications.
$6.95

24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.
$1.55

Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.
- 24mm diameter, single-turn potentiometers
- Carbon film element
- Metal shaft and bushing
- Panel mount
- Ear-lug solder terminals
- 6mm diameter slotted-end solid shaft
- 10mm bushing length
- 10mm shaft length (extended past bushing)
- Linear Taper
$7.95

Standard fit for most vintage American made tube amps.
$1.70

CTS J Taper audio potentiometer.
- Body Diameter: 24 mm
- Power Rating ⅓ watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: 3/8"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Brass - Solid Shaft
$4.25

Bourns Linear Taper pots. Carbon Element, Split Shaft, Solder Lugs.
- 24mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 250V
Starting at $2.50

24mm, ½" watt, ⅜" bushing, ¼" splined nylon shaft for set screw or push-on knob. for most US made amps.
$3.25

Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
Starting at $2.60

Linear. 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
If additional nuts are needed, please see part number R-VM-NUT-2
$2.95

Alpha, 1 meg, switched potentiometer. (SPST) 24mm body, 13/8" long x ¼" diameter solid shaft.
$2.65

Replacement for Marshall. Audio taper, 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
If additional nuts are needed, please see part number R-VM-NUT-2
$2.95

Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each audio taper potentiometer includes a nut, flush washer, and lock washer.
- 24mm diameter, single-turn potentiometers
- Carbon film element
- Metal shaft and bushing
- Panel mount
- Ear-lug solder terminals
- 6mm diameter slotted-end solid shaft
- 10mm bushing length
- 10mm shaft length (extended past bushing)
- Audio Taper
$7.95

CTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
- Body Diameter: 24 mm
- Power Rating ¼” watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: 3/4"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Brass – Knurled Shaft
- 24 teeth slot and knurled shaft
- Includes (1) Nut and (1) Lock Washer
$4.95

5 Watt wirewound, 100 Linear, 3/8" bushing, split shaft.
$3.85