Potentiometers

Alpha Mini Pots with solid shaft and long PC mount terminals.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)

16mm solid shaft audio potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Audio (Log)

Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

16mm solid shaft linear potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Linear

Alpha Mini Pots with solid shaft and long PC mount terminals.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)

Audio taper (log), vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

High-quality Bourns 3362P trimpots. These single-turn cermet trimmers can be found in countless guitar pedals and synthesizer modules. Sealed trimmers are built with an o-ring seal to prevent entrance of moisture and serve as a mechanical restraint to prevent unwanted wiper movement. ±10% tolerance.

Reverse audio taper Alpha 16mm pots with a solid shaft and right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)
• Shaft Diameter: 6.35 mm (0.25”)

Linear taper, vertical mount, Song Huei pots with a 6mm shaft. These 9mm pots are popular in DIY guitar pedals, modular synthesizers, and other projects where space is limited. The knurled shaft features a painted indicator line so no knob is required. These tall versions have a 17mm shaft length and a total height of 25mm. For audio taper versions, see R-VSHL-AX. For center notched linear taper versions, see R-VSHL-BX-CN.

High-quality Bourns 3296Y trimpots. These sealed cermet trimmers have 25 turns for precision setting. ±10% tolerance.

Standard vintage style wah pots with solder lugs and gear included. Part # R-VWAH-POT (100K) has an audio taper. All others are linear.

Reverse audio taper 16mm solid shaft potentiometers with solder lug terminals. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Reverse Audio (Anti-Log)

Dual-gang 16mm potentiometers with a solid shaft and a linear taper. These pots have solder lug terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Linear

Linear taper, vertical mount, Song Huei pots with a 6mm shaft and a notched center position sometimes called a center detent. These 9mm pots are popular in DIY guitar pedals, modular synthesizers, and other projects where space is limited. The knurled shaft features a painted indicator line so no knob is required. These tall versions have a 17mm shaft length and a total height of 25mm. For audio taper versions, see R-VSHL-AX. For standard linear taper versions, see R-VSHL-BX.

Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter and a center notch (detent). The center notch is useful for builds where the center position of the pot is commonly used such as panners or EQ controls. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

High-quality pcb mount linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Right-angle PCB mount
• Linear taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.

Audio taper (log), right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

Linear taper, vertical mount, Alpha pots with a 6mm D shaft. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

Linear taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
• Lead Distance from shaft center: 14.3 mm (0.563”)
• Lead Thickness: 0.5 mm (0.020”)
• Shaft Diameter: 6.35 mm (0.25”)

Piher PT-15 15mm carbon trimmer potentiometers. These trimmers are used in a variety of amps and equipment and most notably in Marshall amplifiers. Features:

• Carbon resistive element
• Dust proof enclosure
• Polyester substrate

Linear taper 16mm potentiometers with a T18 knurled shaft. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)

High-quality pcb mount audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.

• Right-angle PCB mount
• Audio taper
• +/- 10% tolerance
• ¼” (6.35mm) solid shaft
• Machine-pressed dust seal
• High quality wiper material
• Low residual resistance

For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.

Audio taper Alpha 16mm pots with a solid shaft and long PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 20.7 mm + 4 mm (0.815” + 0.158”)
• Lead Distance from shaft center: 14.3 mm (0.563”)
• Lead Thickness: 0.5 mm (0.020”)
• Shaft Diameter: 6.35 mm (0.25”)

Linear taper, vertical mount, dual gang Alpha pots with a 6.35mm shaft diameter. Dual gang pots are useful for stereo controls and other circuits requiring two separate pots moving in tandem. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included. See R-VAV-A100K-DUAL for an audio taper version.