Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.

Potentiometers

Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.
R-VBM-SS Pot - Bourns, Audio, Solid Shaft, Mini
Mini Carbon Element, Solid Shaft. Audio. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element ¼" Solid Shaft 3/8" Bushing Width, 3/8" Bushing Length Tolerance: ±20 % Power Rating: 0.1 watt Maximum Operating Voltage: 150 V Bourns Series Number: PDB181-GTR
Starting at $2.50
R-VBM2-500KM-SS Potentiometer - Bourns, Dual MN Taper, Solid Shaft, 500kΩ
Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.50
R-VB2 Potentiometer - Bourns, Audio, Solid Shaft, Dual Mini, Push-Pull
Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 1/4" shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
$7.95
R-VPP-1MA-SL Potentiometer - Alpha, 1MΩ, Audio, DPDT, 7mm Bushing, Solder Lug
Alpha Push-Pull, Solder Lug, 7mm bushing, DPDT, 1/4" solid shaft, audio taper potentiometer.
$3.25
R-VSN-XA-SS Potentiometer - Audio, Solid Shaft, Snap-In, 16mm
Audio. 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
Starting at $1.35
R-VPP-XL Potentiometer - Alpha, Linear, Solid, DPDT, 7mm Bushing
Push-Pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, linear.
$3.25
R-VSN-1MA Potentiometer - Fender®, 1MΩ, J Taper, Control, Snap-In
Original Fender® snap-in, control potentiometer, 1 meg, J taper.
$3.25
R-VSN-XL-SS Potentiometer - Linear, Solid Shaft, Snap-In, Bracket
Linear. 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.35
R-VSN-XC-SS Potentiometer - Reverse Audio, Solid Shaft, 16mm, Snap-In
Reverse Audio (30C). 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.35
R-VAMA-SS Potentiometer - Alpha, Audio, Solid Shaft, 16mm
Miniature solid shaft audio potentiometers.
Starting at $1.25
R-VAML-SS Potentiometer - Alpha, Linear, Solid Shaft, 16mm
Miniature solid shaft linear potentiometers.
$1.25
R-VPP-XA Potentiometer - Alpha, Audio, Solid Shaft, DPDT, 7mm Bushing
Push-Pull Solder Lug, 7mm bushing, DPDT, ¼" shaft, audio.
$3.25
R-VAMA-SS-PC Potentiometer - Alpha, Audio, Solid Shaft, PC Lead, 16mm
Alpha Mini Pots with solid shaft and short PC mount terminals. • Threading: M7 x 0.75 • Distance between terminals: 5 mm (0.197”) • Lead Depth from Panel: 3.8 mm (0.150”) • Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”) • Lead Thickness: 0.5 mm (0.020”)
$1.10
R-VAMA-SS-PCL Potentiometer - Alpha, Audio, Solid Shaft, Long PC Lead, 16mm
Alpha Mini Pots with solid shaft and long PC mount terminals. • Threading: M7 x 0.75 • Distance between terminals: 5 mm (0.197”) • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”) • Lead Distance from shaft center: 16 mm (0.630”) • Lead Thickness: 0.5 mm (0.020”)
$1.10
R-VAML-SS-PC Potentiometer - Alpha, Linear, Solid Shaft, PC Lead, 16mm
Alpha Mini Pots with solid shaft and short PC mount terminals. • Threading: M7 x 0.75 • Distance between terminals: 5 mm (0.197”) • Lead Depth from Panel: 3.8 mm (0.150”) • Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”) • Lead Thickness: 0.5 mm (0.020”)
$1.10
R-VAML-SS-PCL Potentiometer - Alpha, Linear, Solid Shaft, Long PC Lead, 16mm
Alpha Mini Pots with solid shaft and long PC mount terminals. • Threading: M7 x 0.75 • Distance between terminals: 5 mm (0.197”) • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”) • Lead Distance from shaft center: 16 mm (0.630”) • Lead Thickness: 0.5 mm (0.020”)
$1.10
R-VBM-XL-SS Pot - Bourns, Linear, Solid Shaft, Mini
Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, SolidShaft, Solder Lugs.
  • 17mm Body Diameter
  • ¼ watt
  • 300° rotation
  • 1/4" solid shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
$1.95
R-V250K-PAN Potentiometer - Fender®, 250kΩ, Pan, MN Taper, Solid Shaft
Genuine Fender® 250K pan pot with center detent. Pan pots are also known as balance pots. Solid shaft with 3/8” bushing. Mounting hardware not included. See R-VNUT-38 for a compatible nut and washer.
$5.65
On Backorder
Don't see what you're looking for? Send us your product suggestions!