Potentiometers
Potentiometers are used to control volume and tone. A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider.Check out our Tech Corder articles on pots, including Potentiometer Types.

Standard fit for most vintage American made tube amps.
Starting at $1.90

Standard fit for most vintage American made tube amps.
$1.90

Alpha Mini Pots with solid shaft and long PC mount terminals.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
- Lead Distance from shaft center: 16 mm (0.630”)
- Lead Thickness: 0.5 mm (0.020”)
Starting at $0.85

16mm solid shaft audio potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Bushing Length: 6.5mm (0.256")
- Shaft Diameter: 6.35mm ( 0.250")
- Taper: Audio (Log)
Starting at $0.99

Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

16mm solid shaft linear potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Bushing Length: 6.5mm (0.256")
- Shaft Diameter: 6.35mm ( 0.250")
- Taper: Linear
Starting at $0.99

CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
- Body Diameter: 24 mm
- Power Rating ⅓ watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: ⅜"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Aluminum - Solid Shaft
- Includes (1) Nut and (1) Lock Washer
$4.95

24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.
$1.55

High-quality Bourns 3362P trimpots. These single-turn cermet trimmers can be found in countless guitar pedals and synthesizer modules. Sealed trimmers are built with an o-ring seal to prevent entrance of moisture and serve as a mechanical restraint to prevent unwanted wiper movement. ±10% tolerance.
Starting at $1.25

Linear taper, vertical mount, Song Huei pots with a 6mm shaft. These 9mm pots are popular in DIY guitar pedals, modular synthesizers, and other projects where space is limited. The knurled shaft features a painted indicator line so no knob is required. These tall versions have a 17mm shaft length and a total height of 25mm. For audio taper versions, see R-VSHL-AX. For center notched linear taper versions, see R-VSHL-BX-CN.

High-quality pcb mount linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
- Right-angle PCB mount
- Linear taper
- +/- 10% tolerance
- ¼” (6.35mm) solid shaft
- Machine-pressed dust seal
- High quality wiper material
- Low residual resistance
For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
$1.45

Alpha Mini Pots with solid shaft and short PC mount terminals.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 3.8 mm (0.150”)
- Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
- Lead Thickness: 0.5 mm (0.020”)
$1.25

Linear taper 16mm potentiometers with a T18 knurled shaft. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
- Lead Distance from shaft center: 16 mm (0.630”)
- Lead Thickness: 0.5 mm (0.020”)
$0.99

High-quality pcb mount audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
- Right-angle PCB mount
- Audio taper
- +/- 10% tolerance
- ¼” (6.35mm) solid shaft
- Machine-pressed dust seal
- High quality wiper material
- Low residual resistance
For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC. For audio taper solder lug pots see R-VGORVA-AX-SL. For linear taper solder lug pots see R-VGORVA-BX-SL.
$1.45

Piher PT-15 15mm carbon trimmer potentiometers. These trimmers are used in a variety of amps and equipment and most notably in Marshall amplifiers. Features:
- Carbon resistive element
- Dust proof enclosure
- Polyester substrate
Starting at $0.00
Save 100%
Originally: $1.45

Linear taper, right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
Starting at $2.65

Genuine Fender® replacement potentiometers with linear tapers for Blues Junior models.
For audio taper pots for the BLues Junior, please see R-VBJ-XA.
- 25 kΩ - Middle tone control
- 50 kΩ - Reverb / Master Volume
- 250 kΩ - Bass tone control
For audio taper pots for the BLues Junior, please see R-VBJ-XA.
Starting at $3.50

Linear. 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.40

25kΩ Piher PT-15 15mm carbon trimmer potentiometers. These trimmers are used in a variety of amps and equipment and mount horizontally to the PCB with a slotted top adjustment. Features:
- Carbon resistive element
- Dust proof enclosure
- Polyester substrate
$1.45

Alpha Mini Pots with solid shaft and short PC mount terminals.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197”)
- Lead Depth from Panel: 3.8 mm (0.150”)
- Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
- Lead Thickness: 0.5 mm (0.020”)
$1.15

High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
- Solder lug / panel mount
- Audio taper
- +/- 10% tolerance
- ¼” (6.35mm) solid shaft
- Machine-pressed dust seal
- High quality wiper material
- Low residual resistance
For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45

Reverse Audio (30C). 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.79

High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
- Solder lug / panel mount
- Linear taper
- +/- 10% tolerance
- ¼” (6.35mm) solid shaft
- Machine-pressed dust seal
- High quality wiper material
- Low residual resistance
For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45