Potentiometer - Linear, 16mm, Marshall Style
Linear, 16mm, 7mm bushing.
RoHS Compliant
SKU:
R-VXL-M-16
Item ID:
003755
Application:
Shaft:
Taper:
Termination Style:
Type/Size:
Resistance | Our Part Number | UPC/EAN |
---|---|---|
10 kΩ | R-V10KL-M-16 | 609722158367 |
100 kΩ | R-V100KL-M-16 | 609722158329 |
22 kΩ | R-V22KL-M-16 | 609722158497 |
220 kΩ | R-V220KL-M-16 | 609722158459 |
4.7 kΩ | R-V4D7KL-M-16 | 609722158756 |
50 kΩ | R-V50KL-M-16 | 609722164030 |
Body Depth | 9.2 mm | |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. |
Packaging Dimensions | 4.7 kΩ version | R-V4D7KL-M-16 | 1.3 in. × 1 in. × 0.8 in. |
10 kΩ version | R-V10KL-M-16 | 1.3 in. × 1 in. × 0.8 in. | |
22 kΩ version | R-V22KL-M-16 | 1.3 in. × 1 in. × 0.8 in. | |
50 kΩ version | R-V50KL-M-16 | 1.1 in. × 1 in. × 0.8 in. | |
100 kΩ version | R-V100KL-M-16 | 1.3 in. × 1 in. × 0.8 in. | |
220 kΩ version | R-V220KL-M-16 | 1.3 in. × 1 in. × 0.8 in. | |
Weight (Packaging) | 4.7 kΩ version | R-V4D7KL-M-16 | 0.015 lbs. |
10 kΩ version | R-V10KL-M-16 | 0.013 lbs. | |
22 kΩ version | R-V22KL-M-16 | 0.013 lbs. | |
50 kΩ version | R-V50KL-M-16 | 0.013 lbs. | |
100 kΩ version | R-V100KL-M-16 | 0.018 lbs. | |
220 kΩ version | R-V220KL-M-16 | 0.013 lbs. |
R-V4D7KL-M-16 - 4.7 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V10KL-M-16 - 10 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V22KL-M-16 - 22 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V50KL-M-16 - 50 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V100KL-M-16 - 100 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. | |
R-V220KL-M-16 - 220 kΩ version | Body Depth | 9.2 mm |
Body Width | 17mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
C.C Torque | 100-350 gf-cm | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Manual Soldering Max Temp for 3 sec. | 300 °C | |
Max. Working Voltage | 200V | |
Max Rotational Stopper Strength | 8Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.2W | |
Rotational Torque | 20-300 gf-cm | |
Shaft Diameter | 6.35 mm | |
Sliding Noise | <47 mV | |
Tap Residual Resistance | ≤20 Ω | |
Taper | Linear | |
Tolerance | ± 20% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 20 mm | |
Washer I.D. | 7.2 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. |
![]() | All Models |
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers
Will this work as the gain pot on a JCM900?
Asked by Anonymous on August 16th, 2016.
We are unsure if this will work in your amp. If you pull the pot out of your amp, you should see some lettering at the top of the pot. It should either start with the letter B or A. B is a lineal pot and A is an audio taper pot. The next number will tell you the resistance such as 1M (1Meg), 10K (10 kiloohms), etc. With these characters you will be able to determine exactly what is in your JCM 900.
1 answers
Does your 50k potentiometer R-V50KL-M-16 have the damped rotation that makes it harder to turn, or does it turn freely?
Asked by Anonymous on February 3rd, 2017.
This pot has some tension when you turn it.
1 answers
Will this pot fit a Yamaha HY-10G Guitar Amp for the Volume pot?
Asked by Anonymous on February 23rd, 2018.
The best thing to do is remove the volume pot and do a visual comparison with this pot. We can also compare specs if you need measurements.
Product Reviews
I used these pots in an Ashdown bass amp. The shafts were a few millimeters too long, but I was able to cut the shafts to the proper length with a Dremel tool. The pots are advertised as Marshall parts but I've used them in all different brands. Good product!