Potentiometer - Alpha, Linear, PC Mount, for Marshall

Alpha
Potentiometer - Alpha, Linear, PC Mount, for Marshall image 1
Customer image:<br/>""
Click to zoom in
Potentiometer - Alpha, Linear, PC Mount, for Marshall image 1
Customer Images:
Customer image: ""

Potentiometer - Alpha, Linear, PC Mount, for Marshall

$2.95
In Stock

Linear. 24mm.

If additional nuts are needed, please see part number R-VM-NUT-2

Part Numbers
ResistanceOur Part NumberUPC/EAN
4.7 kΩR-V4D7KL-M609722158749
22 kΩR-V22KL-M609722158480
100 kΩR-V100KL-M609722158312
220 kΩR-V220KL-M609722158442
Product Measurements by Type
Body Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
Packaging Information
Packaging Dimensions1.5 in. × 1.4 in. × 1 in.
Weight (Packaging)0.031 lbs.
Product Measurements by Item
R-V4D7KL-M - 4.7 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V22KL-M - 22 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V100KL-M - 100 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.
R-V220KL-M - 220 kΩ versionBody Depth11.5 mm
Body Width24 mm
Bushing Length11.5 mm
Bushing ThreadM8X0.75
Hex Nut Thickness2.0 mm
Hex Nut Width11 mm
Insulation Resistance>100 MΩ at 500VDC
Life15,000 cycles
Manual Soldering Max Temp for 3 sec.350 °C
Max. Working Voltage500V
Max Rotational Stopper Strength6Kgf
Operating (Useable) Temperature-10 °C to +70 °C
Rated Wattage (Power)0.5W
Rotational Torque20-200 gf-cm
Shaft Diameter6 mm
Sliding Noise<47 mV
Tap Residual Resistance≤100 Ω
TaperLinear
Tolerance±20%
Total Rotational Angle300° ±5°
Total Shaft Length21 mm
Washer I.D.8.1 mm
Washer O.D.14 mm
Washer Thickness0.4 mm
Withstand Voltage500 VAC for 1 min.

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Specification Sheet Specification Sheet1.41 MB

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on August 18th, 2016.
Matt H
August 18th, 2016
They should fit the original pots.
claydeaver
March 15th, 2018
mine do not on a late 80's marshall reverb 12, shaft nut is smaller than original, you need two, comes with one only
Anonymous
December 2nd, 2021
Not on many 80-90's amps. Buy extras here as they are VERY difficult to source elsewhere.
Asked by Anonymous on July 26th, 2017.
Matt H
July 26th, 2017
All of these dimensions can be found in the product measurements listed above. Overall length is 1.15" (29.3mm).

Product Reviews

5.00 out of 5 based on 1 reviews
Karen B. - July 19th, 2022
5 out of 5

Great replacement for my Marshall 2553 treble pot.
Be sure and order extra hex nuts as the old ones from your amp are too big.
I suggest they sell the pots with 2 hex nuts instead of one. You need two, one for inside and one for outside the faceplate.