Potentiometer - Alpha, 1MΩ, Audio, DPDT, 7mm Bushing, Lug
Alpha Push-Pull, Solder Lug, 7mm bushing, DPDT, ¼" solid shaft, audio taper potentiometer.
SKU:
R-VPP-1MA-SL
Item ID:
039644
UPC/EAN:
841358105920
Brand:
Alpha
Resistance:
Shaft:
Taper:
Termination Style:
Type/Size:
RoHS Compliant
Body Depth | 26.5 mm | |
Body Width | 18 mm | |
Bushing Length | 6.5 mm | |
Bushing Thread | M7X0.75 | |
Hex Nut Thickness | 2 mm | |
Hex Nut Width | 10 mm | |
Insulation Resistance | >100 MΩ at 500VDC | |
Life | 15,000 cycles | |
Max. Working Voltage | 150V | |
Max Rotational Stopper Strength | 6Kgf | |
Operating (Useable) Temperature | -10 °C to +70 °C | |
Rated Wattage (Power) | 0.1W | |
Resistance | 1 MΩ | |
Rotational Torque | 10-100 gf-cm | |
Shaft Diameter | 6 mm | |
Sliding Noise | <47 mV | |
Taper | Audio | |
Tolerance | ± 30% | |
Total Rotational Angle | 300° ±5° | |
Total Shaft Length | 15 mm | |
Washer I.D. | 7.1 mm | |
Washer O.D. | 12 mm | |
Washer Thickness | 0.4 mm | |
Withstand Voltage | 500 VAC for 1 min. |
Packaging Dimensions | 1.6 in. × 0.978 in. × 0.712 in. | |
Weight (Packaging) | 0.026 lbs. |
![]() | All Models |
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers
Is the switch push-pull ?
Asked by Anonymous on August 10th, 2017.
Yes the DPDT switch is push pull.
1 answers
What is the bushing diameter?
Asked by Anonymous on August 10th, 2017.
The threaded bushing on these is 1/4".
1 answers
Could this replace a 30a potentiometer?
Asked by Anonymous on March 29th, 2018.
This is a 1 Meg pot and we do not have any specs on the amperage.
Customers who purchased this item also bought
Wire - Gavitt, Cloth, 22AWG Stranded, Top Coat Pre-Tinned Resistors - 0.5 Watt, Metal Film, 1% tolerance Resistors - 5 Watt, Wirewound, Power, 5% tolerance Potentiometer - Alpha, Audio, Solid Shaft, 16mm Potentiometer - Alpha, Linear, Solid Shaft, 16mm Capacitor - Jupiter, Yellow Vintage Tone Capacitors, Polyester, Axial Lead
Product Reviews
I was surprised to get a pot with such a small bushing. I had to get washers to adapt it to a 3/8" hole. Yes, it says 7mm., I'm not used to thinking in metric. It'd be nice if it said 1/4"