Potentiometer - Alpha, 1MΩ, Audio, 7mm Bushing, DPDT Switch
Push-pull pot. 7mm bushing. 1 meg, ¼" solid metal shaft. Used in many Fender® applications.
|Body Depth||26.5 mm|
|Body Width||18 mm|
|Bushing Length||6.5 mm|
|Hex Nut Thickness||2 mm|
|Hex Nut Width||10 mm|
|Insulation Resistance||＞100 MΩ at 500VDC|
|Max. Working Voltage||150V|
|Max Rotational Stopper Strength||6Kgf|
|Operating (Useable) Temperature||-10 °C to +70 °C|
|Rated Wattage (Power)||0.1W|
|Rotational Torque||10-100 gf-cm|
|Shaft Diameter||6.35 mm|
|Sliding Noise||<47 mV|
|Total Rotational Angle||300° ±5°|
|Total Shaft Length||15 mm|
|Washer I.D.||7.1 mm|
|Washer O.D.||12 mm|
|Washer Thickness||0.4 mm|
|Withstand Voltage||500 VAC for 1 min.|
|Packaging Dimensions||1.9 in. × 1.3 in. × 1 in.|
|Weight (Packaging)||0.03 lbs.|
|Specification Sheet||All Models|
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers Can this pot be used in the vht special 6 as a boost switch
1 answers What's the difference between this pot and SKU R-VPP-1MA-SL?
1 answers I have a vintage fender deluxe reverb 11 and the volume chanel push/pull DPDT pot needs replacing would this work? Also the clean channel volume/ push/pull for bright pot looks the same . would this pot work for both or can you suggest one that would and do you post to UK Regards Lambert
Asked by Anonymous on June 25th, 2020.
We do not have cross reference materials to determine the specs required for the two pots in question. If you can confirm that the two pots that need to be replaced are both supposed to be rated at 1M, then these should work. We ship internationally, so yes, we can deliver to the UK if we have what you need.
1 answers Is the pot push/pull on/on to switch channels, and not to turn off on pull