Pickups

The TL-Classic bridge is an authentic take on the tele bridge pickup. With flat Alnico 5 pole pieces, vulcanized fiberboard flatwork, and a copper plated base plate, the TL-Classic bridge offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.

Genuine Gretsch G5400 Blacktop Filter'Tron pickups. Includes silver mounting ring, three pickup mounting screws with springs, and four mounting screws for the ring. These pickups feature a pre-wired connector for solderless connections.

The ST-Classic is an amazing homage to the 1960’s strat pickup. With staggered Alnico 5 rod magnets, vulcanized fiberboard flatwork, and enamel coated wire, the ST-Classic offers a truly vintage sound. These pickups are wax potted for sonic stability, feature a bevel on the magnets, and use cloth pushback wire for an easy and clean install. A cover, mounting screws and springs are included. Made in Japan.

This is an ultra sweet sounding, low output-pickup. The vintage single coil specifications offer a tight, balanced low end response and sweet chimey highs. If you are looking for a true vintage tone that ISN'T modified to sound like a 60 year old pickup, this is an excellent upgrade. Great for blues and classic old school funk applications. Staggered Alnico polepieces. Available reverse wound/reverse polarity. White Cover

• D.C. resistance = 6.5K
• Magnet Type = Alnico 5
• Magnet dimensions: 5mm X 17mm polepieces

The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

The HB-Classicα is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

Kent Armstrong opened the archives for this replication of a 1952 Tele® single coil neck pickup using authentic 43 gauge Formvar wire and alnico 3 magnets for that true vintage tone that everyone demands from the boutique winders. Now these great pickups are available to you for a fraction of the cost! Traditional 52' recipe bridge pickup available as a partner, P-PUK28.

This Texas Vintage pickup adds the bite to your single coil tone that you have been looking for! Featuring Alnico magnets & overwound coils, these babies satisfy the souls of those who require vintage tone, but want more out of their pickups.

• Magnet Type = Alnico 5 pole pieces
• Inductance (henrys) = 4.02
• Magnet Dimensions = 5mm W X 17mm L
• Includes 2 conductor wiring

Kent Armstrong “Smooth Sam” jazz pickup, side-mount configuration. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited. Magnet Type = Alnico 5 Magnet Dimensions = 2 9/32 in. (58mm) Long x ⅛ in. (3mm) Thick x ½ in. (12.6mm) Wide D.C. resistance = 7.9K (two solder lug connections on underside) Pickup Dimensions: ½ in. (12.6mm) Thick 1 3/32 in.

The TL-Classic neck is an authentic take on the tele neck pickup. With Alnico 5 rod magnets, vulcanized fiberboard flatwork, and a long skirted cover, the TL-Classic neck offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.

Kent Armstrong “Slimbucker” jazz pickup with slim profile (3/8" thick), side-mount configuration. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited.

Kent Armstrong opened the archives for this replication of a 1952 Tele® single coil bridge pickup using authentic 42 gauge Formvar wire and alnico 3 magnets for that true vintage tone that everyone demands from the boutique winders. Finally Kent added a stainless steel base plate to ensure the magnetic field is not absorbed by a magnetic plate lessening the field strength. Now these great pickups are available to you for a fraction of the cost! Chrome covered neck position available as a partner, P-PUK29.

Single P-90 pickup for bridge position with a cream colored plastic cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating!

Fender® reproduces the pickup that was introduced in the early 60s, the Original Jazz Bass Pickup. Made with flush mounted AlNiCo 5 magnets and enamel coated magnet wire, the Original Jazz Bass pickups deliver the low-end growl and up front midrange punch that makes this instrument so popular. Each pickup comes with a copper shield and black covers.

Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.

Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 5.92k Ohms
• Inductance (henrys) = 3.61
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

Slightly hotter even than the 57 models, these recreations of the 1962 Strat® single coil pickups deliver a true vintage tone that is a blast from the past. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 6.19k Ohms
• Inductance (henrys) = 2.63
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

Has your original Split-Tube run out of lipstick? Now you don't have to modify your favorite instrument. Bring your guitar back to the original sound you loved and install correct sized replacement pickups for Danelectro®, Silvertone®, and Coral® Split-Tube™ pickups.

• ALNICO MAGNET/D.C. resistance = 4.9K
• Magnet dimensions in millimeters = 62 long X 3 thick X 13 wide.

Single '57/'62 Strat single coil pickup. Reverse engineered, these pickups deliver the original vintage Stratocaster sound, feel, and vibe! This is pure and original Strat tone. The staggered beveled-edge Alnico 5 magnets with Formvar wire produce glistening highs and warm lows that are unquestionably vintage. These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire.
This pickup is sold individually.

• DC Resistance: 5.6k
• Inductance: 3 H

Kent Armstrong “Jazzy Joe” jazz pickup with adjustable pole pieces, side-mount configuration. Nickel. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited. Magnet Type = Alnico 5 Magnet Dimensions = 55mm Long x 3mm Thick x 12.5mm Wide D.C. resistance = 7.9K (two solder lug connections on underside) Pickup Dimensions: 7/16 in. (11.1mm) Thick – not including pole pieces 1 7/64 in.

Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.

Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.

Made with the same materials and specifications of an early 1950s Telecaster pickup, the Original Vintage Telecaster speaks with extremely accurate vintage Tele twang. Made with AlNiCo 3 magnets, enamel coated magnet wire these pickups duplicate the warmth and edge that you'd come to expect from Fender®.

"Gretsch Filter'Tron Electric Guitar Pickups Filter Out Hum, Neon Noises, Crackle and Electrical Disturbance!" The Filter'Tron "Electronic Guitar Head" was introduced in 1957 at the summer NAMM show in Chicago. Filter'Tron pickups feature dual-coils and are designed to Filter out the electronic hum normally associated with single-coil pickups, while adding a warmer tone, and a significant increase in output and sustain.