Pickups

Genuine Gretsch G5400 Blacktop Filter'Tron pickups. Includes silver mounting ring, three pickup mounting screws with springs, and four mounting screws for the ring. These pickups feature a pre-wired connector for solderless connections.
$31.95

The ST-Classic is an amazing homage to the 1960’s strat pickup. With staggered Alnico 5 rod magnets, vulcanized fiberboard flatwork, and enamel coated wire, the ST-Classic offers a truly vintage sound. These pickups are wax potted for sonic stability, feature a bevel on the magnets, and use cloth pushback wire for an easy and clean install. A cover, mounting screws and springs are included. Made in Japan.
$31.98

The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $41.65

Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.
Starting at $55.95

These overwound Tele pickups are constructed with AlNiCo 5 magnets and enamel coated magnet wire. The bridge pickup features height staggered magnets and a copper plated steel bottom plate for increased output, presence and midrange, while the nickel-silver cover on the neck pickup produces a clear warm tone that only a true Custom Shop Tele pickup can do. From Merle to Metal, the Texas Tele will demand their attention. Bridge:
Neck:
Fender part number: 099-2121-000
- DC Resistance: 10.5k
- Inductance: 3.95H
Neck:
- DC Resistance: 9.5k
- Inductance: 3.3H
Fender part number: 099-2121-000
$155.95

This McNelly Stagger Swagger pickup features an open nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
$145.00

The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $40.95

Package of 3
Single coil tone without the hum! Brilliant clarity, definition and harmonic attributes of a vintage Strat. Features special beveled edge Alnico 5 magnets and enamel-coated magnet wire, which produces the brilliant clarity, definition and harmonic attributes of a vintage Strat in a "Noiseless" package. Comes with potentiometers.- DC Resistance: 9.8k
- Inductance: 3H
Fender part number: 099-2115-000
$199.95

The TL-Classic bridge is an authentic take on the tele bridge pickup. With flat Alnico 5 pole pieces, vulcanized fiberboard flatwork, and a copper plated base plate, the TL-Classic bridge offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.
$31.24

"Gretsch Filter'Tron Electric Guitar Pickups Filter Out Hum, Neon Noises, Crackle and Electrical Disturbance!" The Filter'Tron "Electronic Guitar Head" was introduced in 1957 at the summer NAMM show in Chicago. Filter'Tron pickups feature dual-coils and are designed to Filter out the electronic hum normally associated with single-coil pickups, while adding a warmer tone, and a significant increase in output and sustain.
$84.95

Package of 2
Built with alnico 3 magnets and cloth-covered wire, these single-coil pickups evoke the original era of the Telecaster with sweet, snappy tone and just the right amount of bite. Bridge:- DC Resistance: 6.6k
- Inductance: 3.8H
Neck:
- DC Resistance: 7.2k
- Inductance: 2.4H
$119.95

Colors Available:
Starting at $69.95

Package of 2
Precision Bass, Set of 2. The bass pickup that invented "funk" is still virtually unchanged today with the Original Precision Bass pickup. Made with Alnico 5 magnets, enamel-coated magnet wire, and a copper shield.- DC Resistance: 10.5k
- Inductance: 6.4 H
$95.95

Colors Available:
Starting at $49.95

“The Alnico 5 Signature is higher output than traditional vintage styles. Tight bass, present mids, and a conveniently subdued treble. It's there if you want it, but you're in control. If I were Leo, this is what I would have made in 1950.” –McNelly Pickups
$95.00

This McNelly Stagger Swagger pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
$145.00

Package of 3
Set of three single coil Stratocaster® pickups built to the same specifications as mid-1960s strat® pickups. These pickups feature period correct waxed, push-back, cloth wiring as well as a fiberboard bobbin construction. The staggered pole pieces use vintage style alnico 5 magnets for a balanced sound and focused dynamics.
$149.99

Single P-90 pickup for bridge position with a cream colored plastic cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating!
$57.25

Single '57/'62 Strat single coil pickup. Reverse engineered, these pickups deliver the original vintage Stratocaster sound, feel, and vibe! This is pure and original Strat tone. The staggered beveled-edge Alnico 5 magnets with Formvar wire produce glistening highs and warm lows that are unquestionably vintage. These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire.
This pickup is sold individually.
This pickup is sold individually.
- DC Resistance: 5.6k
- Inductance: 3 H
$64.95

Has your original Split-Tube run out of lipstick? Now you don't have to modify your favorite instrument. Bring your guitar back to the original sound you loved and install correct sized replacement pickups for Danelectro®, Silvertone®, and Coral® Split-Tube™ pickups.
- ALNICO MAGNET/D.C. resistance = 4.9K
- Magnet dimensions in millimeters = 62 long X 3 thick X 13 wide.
$61.90

Colors Available:
Starting at $74.25

This is an ultra sweet sounding, low output-pickup. The vintage single coil specifications offer a tight, balanced low end response and sweet chimey highs. If you are looking for a true vintage tone that ISN'T modified to sound like a 60 year old pickup, this is an excellent upgrade. Great for blues and classic old school funk applications. Staggered Alnico polepieces. Available reverse wound/reverse polarity. White Cover
- D.C. resistance = 6.5K
- Magnet Type = Alnico 5
- Magnet dimensions: 5mm X 17mm polepieces
$37.45

Kent Armstrong “Smooth Sam” jazz pickup, side-mount configuration. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited. Magnet Type = Alnico 5 Magnet Dimensions = 2 9/32 in. (58mm) Long x ⅛ in. (3mm) Thick x ½ in. (12.6mm) Wide D.C. resistance = 7.9K (two solder lug connections on underside) Pickup Dimensions: ½ in. (12.6mm) Thick 1 3/32 in.
$44.50

Colors Available:
- Great for neck or bridge position
- No volume loss in single-coil mode
- Wax-potted to control feedback
- DC Resistance: 8.2kΩ
- Inductance : 5.3h
- Magnet Type : Alnico 4
- Includes installation hardware and wiring diagram
Starting at $99.99