Pickup Parts

Original, made in USA, covers for soap bar P-90 pickups. These premium P-90 covers are made of butyrate and have a 49.2mm spacing.

Original, made in USA, covers for 1950s, vintage-style, tele neck pickups. These premium tele covers are made of nickel silver and feature the long skirt associated with ‘50s era pickups.

Original, made in USA, covers for tele neck pickups. These premium tele covers are made of nickel silver.

Original, made in USA, covers for open-style tele neck pickups. These premium tele covers are made of nickel silver.

Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.

Original, made in USA, 10-hole keeper bar for 50mm spacing. The keeper bar is designed for use with soapbar P-90 pickups. The spare holes are for the pickup mounting screws. This premium keeper bar is made of raw steel.

Metal spacer for building or repairing 7-string humbucking pickups. This spacer is found under the adjustable screw side of the pickup and is compatible with our 7-string baseplate (P-GP-PLATE-3) and screw-side bobbin (P-GP100).

Original, made in USA, 3-48 x 1-¼” machine screws. These premium screws are perfect for mounting humbucker pickups.

Original, made in USA, 3-48 x 1” machine screws. These premium screws are perfect for mounting humbucker pickups that need a shorter screw.

Alnico cast bar magnets for use in humbucker and P-90 pickups. These are fully magnetized through the width and measure 2.444” x .5” x .125”.

Alnico 2 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Tele Style pickups and many others.

Alnico 3 rod magnets with a .195” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for 1950s Tele style pickups and many others.

Alnico 5 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Strat style pickups and many others.

Original, made in USA, mounting rings for mini humbucker and Firebird pickups. These premium metal mounting rings offer an elegant upgrade to the standard plastic rings.

Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.

Nickel pickup cover used when winding your own humbucker sized pickups or for covering previously uncovered pickups to give them that sleek nickel look. These covers are plated and polished to a beautiful shine and feature a vintage style spacing.

• 50mm/1.95” vintage style spacing (outer holes center to center)
• Overall measurements:70mm/2.76” Length x 39.7mm/1.56” Width x 16.8mm/.66” Height

Standard chrome cover for telecaster rhythm/neck position pickup.

• Chrome plated
• Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
• Sold individually

Nickel pickup cover for building or repairing Filtertron style humbucking pickups.

• Nickel plated brass
• Overall measurements: 71.9mm/2.83” Length x 35.3mm/1.38” Width x 16.2mm/.63” Height
• 63.6mm/2.50” center to center mounting screw holes
• Sold individually

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 2 magnet, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These humbuckers feature two rows of adjustable polepiece, in bridge and neck position spacings. The neck pickup is warm and buttery, with a clear, present top end. The bridge pickup is fat and honky, with a rich low end and great clarity. Great choice for rock, rockabilly, blues, country and more!

• Resistance(Kohm) : 4.8K
• Magnet : Alnico 2 Bar

This kit builds one pickup.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. JBA is the most represented in J-Bass style pickup line of WSC. Overwound for more punch, midrange, bass, and output, and delivers '60s Jazz Bass tone. It is constructed with Alnico 5 magnets and Formvar magnet wire for serious thump and growl.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. PBA pickup uses Alnico 5 rod magnets and a knifeedge gloss-cover hot coil wind that delivers a forceful sound with pushed midrange but tight bass and treble response. This pickup provides the humbucking punch and boom associated with the electric bass.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These pickups use alnico 5 pole pieces to produce a warm, well rounded classic tone.