Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

Copper plated steel baseplate for building a Telecaster bridge pickup or repairing a vintage original.

• .04” copper plated steel
• 6-32 mounting screw thread
• Sold individually

Black humbucker screw or slug side bobbin for building or repairing 7-string pickups. Compatible with our 7-string baseplate (P-GP-PLATE-3). 61.2mm/2.40” pole spacing(outer holes center to center

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These pickups use alnico 5 pole pieces to produce a warm, well rounded classic tone.

Standard chrome cover for telecaster rhythm/neck position pickup.

• Chrome plated
• Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
• Sold individually

Genuine Fender®. Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.

Genuine Gretsch G5400 Blacktop Filter'Tron pickups. Includes silver mounting ring, three pickup mounting screws with springs, and four mounting screws for the ring. These pickups feature a pre-wired connector for solderless connections.

Gretsch® Original Filtertron Pickup Ring, for bridge or neck.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. JBA is the most represented in J-Bass style pickup line of WSC. Overwound for more punch, midrange, bass, and output, and delivers '60s Jazz Bass tone. It is constructed with Alnico 5 magnets and Formvar magnet wire for serious thump and growl.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 2 magnet, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These humbuckers feature two rows of adjustable polepiece, in bridge and neck position spacings. The neck pickup is warm and buttery, with a clear, present top end. The bridge pickup is fat and honky, with a rich low end and great clarity. Great choice for rock, rockabilly, blues, country and more!

• Resistance(Kohm) : 4.8K
• Magnet : Alnico 2 Bar

This kit builds one pickup.

Stamped nickel baseplate for building or repairing a 7 string pickup.

• 61.2mm/2.40” spacing(outer holes center to center)
• 88.9mm/3.50”mounting screw hole spacing (center to center)
• .03” stamped nickel construction
• Sold individually

The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. PBA pickup uses Alnico 5 rod magnets and a knifeedge gloss-cover hot coil wind that delivers a forceful sound with pushed midrange but tight bass and treble response. This pickup provides the humbucking punch and boom associated with the electric bass.

The ST-Classic is an amazing homage to the 1960’s strat pickup. With staggered Alnico 5 rod magnets, vulcanized fiberboard flatwork, and enamel coated wire, the ST-Classic offers a truly vintage sound. These pickups are wax potted for sonic stability, feature a bevel on the magnets, and use cloth pushback wire for an easy and clean install. A cover, mounting screws and springs are included. Made in Japan.

Nickel pickup cover for building or repairing Filtertron style humbucking pickups.

• Nickel plated brass
• Overall measurements: 71.9mm/2.83” Length x 35.3mm/1.38” Width x 16.2mm/.63” Height
• 63.6mm/2.50” center to center mounting screw holes
• Sold individually

The TL-Classic bridge is an authentic take on the tele bridge pickup. With flat Alnico 5 pole pieces, vulcanized fiberboard flatwork, and a copper plated base plate, the TL-Classic bridge offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.

The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.

The TL-Classic neck is an authentic take on the tele neck pickup. With Alnico 5 rod magnets, vulcanized fiberboard flatwork, and a long skirted cover, the TL-Classic neck offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.

Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.

Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.

Has your original Split-Tube run out of lipstick? Now you don't have to modify your favorite instrument. Bring your guitar back to the original sound you loved and install correct sized replacement pickups for Danelectro®, Silvertone®, and Coral® Split-Tube™ pickups.

• ALNICO MAGNET/D.C. resistance = 4.9K
• Magnet dimensions in millimeters = 62 long X 3 thick X 13 wide.

Kent Armstrong “Slimbucker” jazz pickup with slim profile (3/8" thick), side-mount configuration. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited.