Pedal Parts / DIY

C-CDD002-1000 Capacitor - 0.002uF, 1000V, Ceramic Disc, ± 10%
0.002uF ceramic disc capacitor rated for up to 1kV, ± 10% tolerance.
$0.25
C-CX-500 Capacitor - 500V, Ceramic Disc, ± 10%
Radial ceramic capacitor.
  • Voltage rating: 500VDC
  • Tolerance: ± 10%
Starting at $0.25
C-D-100V Capacitor - 100V, Ceramic Disc, ± 10%
100 V ceramic disc capacitors. ± 10% tolerance.
Starting at $0.20
C-D-2000V Capacitor - 2000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.
Starting at $0.30
C-D-50V Capacitor - 50V, Ceramic Disc, ± 10%
50V ceramic capacitors with 5mm footprints for use in amplifiers, stomp boxes, and any other electronic project. These capacitors are small and should easily fit in any sized project. These also feature 1” lead lengths so they work great for point to point wiring.
$0.16
C-D680-50 Capacitor - 50V, 680pF, Ceramic Disc
Ceramic disc capacitor, 680 pF (.00068µF) rated for up to 50 V.
Non linear temperature coefficient of capacitance
$0.55
C-ETRX-25 Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.49
C-ETRX-50 Capacitor - 50V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.
$0.49
C-PEI Capacitor - 100V, Polyester Film Inductive
Package of 5
Polyester film dielectric, aluminum foil electrode, copperply leads and epoxy resin coating in inductive type.
  • Small size, light weight and low cost
  • Dissipation factor is small because the leads are directly welded to electrodes
  • Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
  • 100 volt rating
  • Operating temperature range: -40°C to +85°C.
  • Package of 5
Starting at $0.35
C-PFD047-50-R Capacitor - 50V, 0.047µF, Used In Pedal Kits
Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.047µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C
$1.00
C-PFD1-50-R Capacitor - 50 V, 0.1 µF, Polyester
Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.1µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C
$1.05
K-P155 Battery Clip - 9 Volt with Vinyl Tab
Single standard snap-on 9V battery clip. Features six inch pre-stripped and pre-tinned leads for an easy connection.
$0.50
M-HUM-X Hum X - Morley, Ebtech, Ground Loop Hum Eliminator
Ebtech Hum X exterminates ground hum at the source. Filters unwanted voltage and currents that cause ground hum at the source while maintaining an absolutely safe ground. Simply plug Hum X into an offending outlet and plug your equipment into Hum X.
$73.95
M-PAS-CABLE-1 Cable - Power All, 5 Lead Right Angle Daisy Chain
Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the Power-All® ECO-Dapter® 9 VDC power supply to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).
$7.95
M-PAS-CABLE-2 Cable - Power All, 11 Lead Right Angle Daisy Chain
Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.
$16.25
M-PAS-CABLE-3 Cable - Power All, Black Right Angle Extension Jumper
Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Black/R allows the user to power over-sized effect units or units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain. The Cable-Black can be connected to any plug on any Power-All daisy chain, or directly to the ECO-Dapter® itself.
$3.25
M-PAS-CABLE-4 Cable - Power All, Blue Right Angle Phone Plug Extension Jumper
Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a ⅛" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the ECO-Dapter® itself.
$3.25
M-PAS-CABLE-5 Cable - Power All, Green Right Angle Line-6 Extension Jumper
Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the ECO-Dapter®. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips. The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug. the Cable-Green/R can be connected to the male plugs on any Power-All Daisy Chain, or directly to the ECO-Dapter® itself.
$3.25
M-PAS-CABLE-6 Cable - Power All, Grey Battery Snap Jumper
Included in the PA-9ECB Basic Kit and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.
$2.95
M-PAS-CABLE-7 Cable - Power All, Red Right Angle Reverse Polarity Jumper
Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Red/R allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection. The Cable-Red/R can be hooked to any plug on any of the Power-All daisy chains, or directly to the Power-All.
$3.25
M-PAS-CABLECAP Cable Cap - Power All, Insulator Caps for Barrel Connectors
Package of 3
Designed to fit over unused male barrel connectors on a daisy chain or power supply, Cable-Caps protect against short circuits that can occur when a live lead touches a metal surface. Sold in sets of three. Fits over standard 5.5 mm diameter barrel plug connectors.
$1.95
M-PAS-S Power Supply - Power-All® ECO-Dapter®, 9V, 2000mA, for Effects Pedals
Power-All® ECO-Dapter® is a center negative 9VDC power supply for effects pedals that can supply up to 2000mA of power making it a great choice for pedals boards and power hungry effects.
$24.35
On Backorder
M-PAS-X Power Supply - Power-All® ECO-Dapter®, Cable Kits, for Effects Pedals
Power-All® ECO-Dapter® is a center negative 9VDC power supply for effects pedals that can supply up to 2000mA of power making it a great choice for pedals boards and power hungry effects. Power-All® kits include a variety of useful cables for powering multiple pedals to the ECO-Dapter® 9V supply.
Starting at $30.95
P-0201H Terminal Strip - 2 Lug, 2nd Lug Common, Horizontal
Package of 5
Standard size terminal strip, 1/16" thick bakelite, tin plated steel lugs and brackets on 3/8" centers.
$3.45
Don't see what you're looking for? Send us your product suggestions!