# Pedal Parts / DIY

Enclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.
$40.00 Chassis Box - 1590BS, Diecast, 4.40" x 2.38" x 1.65" 4.40" x 2.38" x 1.65" (112mm x 61m x 42mm) diecast aluminum enclosure. Equivalent to the Hammond 1590BS enclosure. This enclosure is a taller version of the 1590B allowing for top mounted jack and more overall area for larger projects.$6.95
Chassis Box - 1590LB, Diecast, 1.99″ x 1.99″ x 1.22″
1.99″ x 1.99″ x 1.22″ (51mm x 51mm x 31mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590LBX enclosure. This enclosure is great for tap tempos and other utility pedals.
$3.95 Power Jack - DC Panel Mount, 5.5mm External, 2.1mm Internal Colors Available: New!: ½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Starting at$0.75
Dust Cap - For DC Power Jack, Low Profile Size
Dust cover for smaller low profile DC power jacks. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack. Jack sold separately.
$0.30 Dust Cap - For DC Power Jack, Standard Size Dust cover for standard size DC power jacks. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack. Jack sold separately.$0.30
Chassis Box - 1590C, Diecast, 4.72" x 3.70" x 2.10"
4.72" x 3.70" x 2.1" (119mm x 94mm x 56mm) diecast aluminum enclosure. Equivalent to the Hammond 1590C enclosure. This enclosure is a taller version of the 1590BB allowing for more vertical space for larger projects.
$6.95 Chassis Box - 1590XX, Diecast, 5.72" x 4.77" x 1.55" 5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.$8.75
Cable - Battery to 2.1mm DC Plug, Center Negative
Cable for connecting 9V batteries to pedals via their DC input jack. This cable is great for using batteries with pedals that don’t have a battery compartment or for quickly switching from a power supply to a battery. This cable is 3 ¼” inches in length. The barrel plug has a 5.5mm outer diameter and 2.1mm inner diameter. Battery not included.
$1.25 Knob - Pointer, Skirted, RCA Style, 1.28” Diameter Colors Available: Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.$0.95
Transistor - AS194DE, Matched Pair, Alfa, SOIC-8, NPN
The AS194DE is a junction isolated ultra well-matched monolithic NPN transistor pair with an
order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range.
To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.
$4.50 Transistor - AS3046, Array of 5, Matched Pair, 14-Pin DIP, NPN The AS3046 is Alfa’s version of the CA3046 IC. The AS3046 consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially-connected pair. The transistors are well suited to a wide variety of applications in low power systems. They may be used as discrete transistors in conventional circuits however, in addition, they provide the very significant inherent integrated circuit advantages of close electrical and thermal matching. The AS3046 is available in a 14-pin DIP package. Features • Matched pair of npn transistors • VBE matched less than ±1 mV • 5 general purpose monolithic transistors • Wide operating current range Applications • Filters • Custom designed differential amplifiers • Temperature compensated amplifiers$3.99
OTA - AS3080E, Linearizing Diodes, Alfa, 8-Pin DIP
The AS3080E is Alfa’s version of the CA3080 IC. The AS3080E is a gain block which is the operational-transconductance-amplifier (OTA). The AS3080E has differential input and a single-ended, push-pull, class A output. Amplifier bias
input may be used either for gating or for linear gain control. High output impedance and transconductance (gM) is directly proportional to the amplifier bias current (IABC). Linearizing diodes are provided at the inputs to reduce distortion and allow higher input levels. The result is a 10-dB signal-to-noise improvement referenced to 0.5 percent THD.
The AS3080E is notable for it’s high slew rate (50V/µs), which makes it especially useful for multiplexer and fast unity-gain voltage followers.
$3.95 OTA - AS3280, Dual, Linearizing Diodes, Alfa, 16-Pin DIP The AS3280 is Alfa’s version of the CA3280 IC. The AS3280 consists of two variable operational amplifiers that are designed to substantially reduce the initial input offset voltage and the offset voltage variation with respect to changes in programming current. This design results in reduced "AGC thump," an objectionable characteristic of many AGC systems. Careful design of critical places of the circuit reduces the amplifier dependence upon thermal and processing variables. The AS3280 has all the generic characteristics of an operational voltage amplifier except that the forward transfer characteristics is best described by transconductance rather than voltage gain, and the output is current, not voltage. The magnitude of the output current is equal to the product of transconductance and the input voltage.$7.95
Transistor - AS394CH, Matched Pair, Alfa, TO5-8 case, NPN
The AS394CH is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.
$4.95 Transistor - AS395H, Matched Pair, Alfa, TO5-8 case, PNP The AS395 dual monolithic PNP transistor offers excellent parametric matching and high frequency performance. Low noise characteristics (1 nV/√Hz typ @ 1 kHz), high bandwidth (190 MHz typical), and low offset voltage (100 µV max), makes the AS395 an excellent choice for demanding preamplifier applications.Tight current gain matching (3% max mismatch) and high current gain (100 min), over a wide range of collector current, makes the AS395 an excellent choice for current mirrors. A low value of bulk resistance makes the AS395 an ideal component for applications requiring accurate logarithmic conformance. To ensure the long-term stability of the matching parameters, internal protection diodes across the base-emitter junction clamp any reverse base-emitter junction potential.$5.50
OTA - LM13700, Dual, Linearizing Diodes and Buffers, 16-Pin DIP
The LM13700 series consists of two current controlled transconductance amplifiers, each with differential inputs and a push-pull output. The two amplifiers share common supplies but otherwise operate independently. Linearizing diodes are provided at the inputs to reduce distortion and allow higher input levels. The result is a 10-dB signal-to-noise improvement referenced to 0.5 percent THD. High impedance buffers are provided which are especially designed to complement the dynamic range of the amplifiers. The output buffers of the LM13700 differ from those of the LM13600 in that their input bias currents (and thus their output DC levels) are independent of IABC.
$2.35 Transistor - AS194H, Matched Pair, Alfa, TO5-8 case, NPN The AS194H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.$4.50
Transistor - AS3046D, Array of 5, Matched Pair, SOIC-14, NPN
The AS3046 is Alfa’s version of the CA3046 IC in an SOIC package. The AS3046D consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially-connected pair. The transistors are well suited to a wide variety of applications in low power systems. They may be used as discrete transistors in conventional circuits however, in addition, they provide the very significant inherent integrated circuit advantages of close electrical and thermal matching.
The AS3046D is available in a 14-pin SOIC package.
Features
• Matched pair of npn transistors
• VBE matched less than ±1 mV
• 5 general purpose monolithic transistors
• Wide operating current range

Applications
• Filters
• Custom designed differential amplifiers
• Temperature compensated amplifiers
$3.95 OTA - AS3080ED, Linearizing Diodes, Alfa, SOIC-8 The AS3080ED is Alfa’s version of the CA3080 IC in an SOIC package. The AS3080ED is a gain block which is the operational-transconductance-amplifier (OTA). The AS3080ED has differential input and a single-ended, push-pull, class A output. Amplifier bias input may be used either for gating or for linear gain control. High output impedance and transconductance (gM) is directly proportional to the amplifier bias current (IABC). Linearizing diodes are provided at the inputs to reduce distortion and allow higher input levels. The result is a 10-dB signal-to-noise improvement referenced to 0.5 percent THD. The AS3080ED is notable for it’s high slew rate (50V/µs), which makes it especially useful for multiplexer and fast unity-gain voltage followers.$4.75
OTA - AS3280D, Dual, Linearizing Diodes, Alfa, SOIC-16
The AS3280 is Alfa’s version of the CA3280 IC in an SOIC package. The AS3280D consists of two variable operational amplifiers that are designed to substantially reduce the initial input offset voltage and the offset voltage variation with respect to changes in programming current. This design results in reduced "AGC thump," an objectionable characteristic of many AGC systems. Careful design of critical places of the circuit reduces the amplifier dependence upon thermal and processing variables.
The AS3280D has all the generic characteristics of an operational voltage amplifier except that the forward transfer characteristics is best described by transconductance rather than voltage gain, and the output is current, not voltage. The magnitude of the output current is equal to the product of transconductance and the input voltage.
$7.95 Transistor - AS394H, Matched Pair, Alfa, TO5-8 case, NPN The AS394H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.$4.25
Power Jack - Lumberg, DC Panel Mount, Snap-in, 5.5mm External, 2.1mm Internal
Snap-in Lumberg panel mount barrel jack with solder lugs. This high quality jack is a similar size to the Lumberg low profile jack but easily snaps into place with no need to thread a nut inside the chassis. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.
$1.55 Potentiometer - Alpha, Linear, 9mm, Vertical Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.$1.85
Don't see what you're looking for? Send us your product suggestions!