Pedal Parts / DIY

Cry Baby Genuine Replacement Part HI01 Halo Inductor. Used in the famous Clyde McCoy® wah, the Halo Inductor is the key to late ’60s American wah tone. The HI01 delivers that vintage sound, with its expressive sweep and throaty voice, while minimizing microphonic noise due to its stabilized cup-core material.

Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.

Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470 kΩ. Original Dunlop replacement part.

Hot Potz II Crybaby Pot. for newer Crybaby models. Made by Beckman. 100 kΩ. Original Dunlop replacement part. The same tone and sweep characteristics as the original Cry Baby Hot Potz potentiometer with low wiper noise and extended life.

250 kΩ gear shaft pot with an audio taper. Original Dunlop replacement part. Used in the Dunlop GCB80 High Gain Volume Pedal.

This yellow fasel is a Toroidal design with the tonal character of a cup core, best for attaining a vintage vibe. Use the precision-wound Toroidal, part number P-ECB-FI-02, for the cleanest sound possible. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from your rig.

Genuine Dunlop replacement potentiometer for wah/volume.

• 10 kΩ Linear
• Gear included

Vinyl replacement tube for the MXR® Talk Box. Tube length is 6.5 feet.

This precision-wound toroidal will give the cleanest sound possible. Use the cup core model, part number P-ECB-FI-01 for a more vintage sound. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.

The Dunlop 18V power supply for Dunlop effects will save you some money on batteries and get the right power to your pedal! Features Include:

• 18 volts of regulated DC current
• 2.1 mm x 5.5 mm plug with negative center

Compatible Dunlop pedals include:

• Older Crybaby Multi-Wah
• SW-95 Slash Wah
• M108 10-band EQ
• KFK1 10-band EQ
• M117R Flanger
• EVH 117 Flanger
• DD11 Dime Distortion
• M134 Chorus
• M181 Bass Blowtorch

Plus many other pedals requiring an 18vdc power supply!

Dunlop® Electronic Components DPDT latching footswitch with solder lugs for MXR, Cry Baby, and other effects pedals.

Bottom Plate for GCB-95. Original Dunlop replacement part. Includes battery box, four mounting screws and four black rubber feet.

This AC adapter powers several older models of Dunlop pedals, which required a 3.5 mm, or 1/8”, plug as opposed to the 5.5mm x 2.1mm barrel plug required by current models.

• Voltage: 9VDC
• Current: 200mA
• Tip positive; Sleeve negative

Dunlop ECB003 US wallwart power supply. Barrel connector.

• Voltage: 9VDC
• Current: 200mA
• Tip Negative; Sleeve positive

GCB-95 latching switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.

Genuine rubber tread for Fuzz Face pedals from Dunlop. The tread is for full size Fuzz Face enclosures and has a cutout for the footswitch and text logo. The tread comes with a 3M adhesive backing.

Keep all of your parts in one place with this magnetic tray. 4” diameter across the top rim and 2.5” diameter on the base.

Genuine Dunlop replacement potentiometer for Jimi Hendrix JH-F1 Fuzz Face. 470 kΩ, Audio taper, solid plastic shaft. Made In U.K.

This is a small double pole double throw (DPDT) effect / bypass latching switch for MXR pedals. Genuine Dunlop replacement part. Six pin through hole PCB mount.

Genuine Dunlop replacement fuzz potentiometer for JDF2 Fuzz Face. 1 kΩ, linear, solid plastic shaft. Made In U.K.

Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.

Original Dunlop offset grommets (i.e. rubber bumpers) used on the underside of the treadle piece (rocking structure) of wah pedal enclosures. Made in USA.

Genuine Dunlop replacement tread pad for Cry-Baby wah pedals. Adhesive backed for easy installation and labeled on top surface to indicate amplifier and instrument inputs.

ECB233 boost / distortion kick switch. Original Dunlop replacement part. Used in the SW95 Crybaby Slash Wah. Through hole PCB mount.