Pedal Parts / DIY
Potentiometer - Dunlop, MXR, 47K, PC mount
Genuine Dunlop replacement potentiometer for Dunlop/ MXR pedals. PC mount, 47K audio taper, knurled shaft.
¼" Jack - Cliff, Mono, PC Mount, L-leg, Tin
- Withstand voltage: 2000V DC Minimum
- Maximum current: 5A
- Temperature rating: -10°C - 70°C
- Life (minimum): 10,000+ operations
- Nominal contact resistance:
Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $9.42
Capacitor - 50V, Ceramic Disc, ± 10%
50V ceramic capacitors with 5mm footprints for use in amplifiers, stomp boxes, and any other electronic project. These capacitors are small and should easily fit in any sized project. These also feature 1” lead lengths so they work great for point to point wiring.
¼" Jack - Mono, PC Mount, for Fender® Amps '88 - '99
Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.
Chassis Box - Hammond, 1590STPC, Octagon, 5.23 x 5.23 x 1.38"
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"
Pedal Box - 6” x 4” x 3", Fits 1590BB, 1590N1 / 125B
High quality crush-proof boxes that are perfectly sized for stompboxes. This cardboard box features triple wall sides and double wall front and bottom ensuring a safe housing for your pedals. The inside dimensions 6” x 4” x 3" fit 1590BB, 1590N1, and 125B. These boxes are ideal for storing or packaging effects pedals.
Washer - Internal Tooth Lock, spring steel
Package of 5Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.45
Knob - Push-On, Marshall Style, black.77" diameter x .62" tall. Fits both fine and coarse knurled pot shafts.
Cap Colors Available:
Wire - 22 AWG Stranded Core, PVC, 300V, 50 Foot Roll22 AWG stranded hook-up wire on a 50 foot roll. This wire is smaller than our other wire options which makes it perfect for tight spaces like effects pedal and other small electronic projects. Strands are tinned individually. See photo for detail.
Knob Cover - Dunlop, rubber, for MXR knobs
Replacement black rubber knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.
DSP Module - ABE, Accu-Bell Effector, 3 Adjustable Effects
The Accu-Bell Effector offers reverb, chorus, and delay with adjustable setting and tap tempo. This module runs on 5.5V to 9.5V DC so it is easy to incorporate into effect pedal builds. Please see the attached datasheet for an example schematic.
Op-Amp - M5201, Dual, With Switch, 8-Pin DIP
The NJM2120 is a dual operational amplifier of 2-INPUT and 1-OUTPUT with analog switch. The NJM2120 can be used as analog switch under the condition of GV=0dB, as Switch + Amp in order that each gain (A or B) can be adjusted independently. Each amplifier of the NJM2120 has the same electrical characteristics as the NJM4558. The NJM2120 is suitable for audio, video, electrical musical instrument, etc.
Terminal Strip - 6 Lug, 2nd Lug Common, Horizontal, package of 5
Package of 5Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 6 lug, 1 ground. Second lug common.
Cable - Power All, 11 Lead Right Angle Daisy Chain
Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.
Footswitch - Carling, DPDT, Side Solder Lugs
Good stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V Note: On-On switches may sometimes be referred to as On-None-On.
Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
Terminal Strip - 3 Lug, 2nd Lug Common, Horizontal
Package of 5Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.
Standoff - M3, Male-Female, Aluminum, 5.5mm Diameter
- Finish/Plating: Clear Iridite
- Material: Aluminum
- OD: 5.5mm
- Shape: Hex (Metric)
- Style: M-F Standoff
- Thread Depth(D): 8mm
- Thread Length (TL): 8mm
- Thread: M3
- Type: Threaded Standoffs
Starting at $0.60
Knob - Black Control, White "V" Line
Set screw with brass insert, ¼" shaft. Measures 1.28" diameter x .71" tall.
Knob - Small Chicken Head, Black, Set Screw
Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
Felt Pad - Dunlop, replacement for Wahs
Replacement Dunlop felt pad for use with wah pedals. This circular felt pad has an adhesive side for an easy installation. The pad is typically installed on the underside of the pedal directly above the footswitch to cushion the contact when switching the wah on and off. Made in USA.
¼" Jack - Pure Tone, Mono, Open CircuitPure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Starting at $4.20