Pedal Parts / DIY

P-H54-DRESS-X Nut - Dress Nut, For Mini Toggle Switches
Colors Available:
Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Starting at $0.49
P-QJ113 Transistor - J113, JFET, N-Channel,TO-92
J113 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
  • Max drain to gate voltage = 35 V
  • Max gate to source voltage = -35 V
  • Max forward gate current = 50 mA
C-ETRX-25 Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.49
K-P155 Battery Clip - 9 Volt with Vinyl Tab
Single standard snap-on 9V battery clip. Features six inch pre-stripped and pre-tinned leads for an easy connection.
P-QMC78L05 Regulator - 5 Volt, Linear Voltage Regulator
5V Linear Regulator. Used in MOD® kits. This fixed-voltage monolithic integrated circuit voltage regulator is suitable for applications that required supply current up to 100 mA.
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
R-VADAPT-25 Potentiometer Adapter Sleeve - Converts 6mm or 18T shaft to ¼"
This brass adapter sleeve converts a 6mm shaft potentiometer or 18T knurled shaft potentiometer to 1/4" shaft (6.35mm), allowing for 1/4" knobs to be used on a wider range of potentiometers. 1/4" tall.
P-Q1N53X Diode - Zener, 5 Watt, ±5% tolerance
5W zener diodes that are great for use in tube amps. These are commonly used to drop B+ voltages for tube modification compatibility or to create low power modes for the amp. A zener is a semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.
C-D680-50 Capacitor - 50V, 680pF, Ceramic Disc
Ceramic disc capacitor, 680 pF (.00068µF) rated for up to 50 V.
Non linear temperature coefficient of capacitance
P-QLM317T Regulator - LM317T, Adjustable Output, 1.5A, Linear Voltage Regulator
Linear regulator with an adjustable voltage range from 1.2V to 37V. This regulator can supply 1.5A of current making it a great option for power supplies.
P-JB-IN-U Power Jack - DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.
P-JB-SM-S Power Jack - DC Panel Mount, Vintage Boss Style, 5.5mm External, 2.1mm Internal
This DC power jack is similar to those used on vintage MIJ Boss pedals and others. This jack has a 2.1mm pin for use with 5.5mm barrel plugs. Three solder lugs are available for tip, ring, and switch.
P-L710-X LED Lens - Fresnel, Polycarbonate, 5mm
Colors Available:
Panel mount led lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • ¼” mounting hole
  • For panel thicknesses of 1/16” to ⅛”
  • Fresnel lens
  • Low Profile
Starting at $0.59
P-JB-EN-S Power Jack - DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
½" panel mount DC jack with solder lugs. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch.
P-JB-PC-S Power Jack - DC PC Mount, 5.5mm External, 2.1mm Internal
This PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
S-HSO-M3-X Standoff - M3, Male-Female, Aluminum, 5.5mm Diameter
  • Finish/Plating: Clear Iridite
  • Material: Aluminum
  • OD: 5.5mm
  • Shape: Hex (Metric)
  • Style: M-F Standoff
  • Thread Depth(D): 8mm
  • Thread Length (TL): 8mm
  • Thread: M3
  • Type: Threaded Standoffs
Starting at $0.60
P-QMC7805 Regulator - 7805, 5 Volt, 1A, Linear Voltage Regulator
5V linear regulator with up to 1 amp of current in a TO-220 package. This style of regulator can be found in many power supplies and also modular synth circuits as well as some stomp boxes. These voltage regulators are monolithic integrated circuits designed as fixed−voltage regulators for a wide variety of applications including local, on−card regulation. These regulators employ internal current limiting, thermal shutdown, and safe−area compensation. With adequate heatsinking they can deliver output currents in excess of 1.0 A. Although designed primarily as a fixed voltage regulator, these devices can be used with external components to obtain adjustable voltages and currents.
S-H911-SEAL Jack Seal - Cliff, for S-H910 and S-H911
Replacement seal for S-H910 and S-H911 Cliff UK jacks.
P-L35X LED - 5mm diameter, diffused lens, 5 mCd
Package of 5
Colors Available:
5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.
  • 5mm size
  • Tinted and diffused
  • Multiple colors available
  • Package of 5
R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
P-QTL072 Op-Amp - TL072, Dual, Low-Noise, JFET Input, 8-Pin DIP
The TL072 is a high speed JFET input dual operational amplifier incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.
P-K380X Knob - Small, Indicator Line, set screw
Colors Available:
The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.
Starting at $0.70
P-L300X LED - 3mm diameter, diffused lens, 3.6 mCd
Package of 5
Colors Available:
Lens Diameter: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.
P-STR-003 Transistor Socket - Cinch, 3 Pin, Phenolic, NOS
New-old-stock transistor sockets made by Cinch. These three pin phenolic sockets offer a more secure hold than the standard machine-pin transistor sockets of today. They can fit a variety of different transistor package sizes. The flat solder lugs can work in point to point builds or in PCBs with appropriate footprints.
Don't see what you're looking for? Send us your product suggestions!