Pedal Parts / DIY
Tool - Hand Riveter, 3/32”, ⅛”, 5/32”, and 3/16”
Hand riveter with four nose pieces and 100 rivets. The included nose pieces fit 3/32”, 1/8”, 5/32”, and 3/16” rivets. A small wrench is tucked into the grip so users can quickly change the nose pieces as needed. This set includes 100 rivets; 25 in each of the compatible sizes.
- 3/32”, 1/8”, 5/32”, and 3/16” nose pieces
- All-steel construction
- Comfortable vinyl grip
- Easily switch between nose sizes using the included wrench
Blind Rivet - Dome Head, Steel, ⅛ in. diameter
Package of 12Steel shank / steel mandrel blind rivets with a ⅛” diameter. Blind rivets, also referred to as pop rivets, can be used to join or fasten two components without requiring access to the backside of the panel or chassis. The installation is quick and results in a joint that can be stronger and tighter than a screw. These rivets are useful for securing tube sockets or other hardware such as battery holders on stompboxes.
Starting at $1.15
Standoffs - 0.18", plastic with adhesive backing
Package of 8Low-profile adhesive standoffs with a 0.180" standoff height that securely attaches your PCB to a flat surface. The post inserts into a 0.125” mounting hole and includes a locking tab that secures the PCB when inserted. It can be used with 1/16” or 1/32” thick PCBs. The 0.6 x 0.6” square base is offset to allow the base to be underneath the board when the mounting hole is close to the PCB edge and the offset base provides a large sticking surface while permitting the PCB to be mounted in tight spaces or close to walls. This can be useful when working with small enclosures. High-quality 3M™ brand double-sided tape secures the standoff to a flat surface. These standoffs are available in packs of 8, 24, or 100 pieces Features:
- Low profile 0.180" standoff height.
- Offset base allows use when holes are close to the PCB edge.
Standoff - M3, Male-Female, Aluminum, 5.5mm Diameter
- Finish/Plating: Clear Iridite
- Material: Aluminum
- OD: 5.5mm
- Shape: Hex (Metric)
- Style: M-F Standoff
- Thread Depth(D): 8mm
- Thread Length (TL): 8mm
- Thread: M3
- Type: Threaded Standoffs
Starting at $0.60
Solder Lug - #6 or #8 Hole, Locking
Package of 10Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.70
Washer - Internal Tooth Lock, spring steel
Package of 5Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.60
Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Standoff - #6-32, Male-Female, Aluminum
Package of 4#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X
Starting at $2.95
Screws - Dunlop, MXR, housing screws, package of 4
Package of 4Genuine Dunlop replacement housing screws for MXR/ Dunlop pedals. Replace lost screws and keep your battery access plate on tight. 6-32 thread, Phillips head.
Pedal Tape - Godlyke, Power Grip, 1 Meter Roll
For the best Pedalboard Dual Lock and Velcro Alternative, try Power-All Power-Grip. Simple, yet ingenious, Power-Grip pedal board tape mates to itself via rows of tiny mushroom-shaped posts that form a much stronger bond than traditional "hook & loop" Velcro fasteners. Just cut to size, apply, and GRIP! Approximately enough for 6 standard-sized pedals
Screw - Hammond, Phillips, Countersunk, 6-32 UNCGenuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Package of 4
Starting at $1.35
Nut - Hex finished, fine thread, zinc
Package of 5Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Starting at $0.30
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
Washer - Type A Narrow, Flat, steel
Package of 5Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.
Starting at $0.45
Standoffs - #6-32, Female, Aluminum
Package of 4#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X
Starting at $2.20